Web: Configuring Port Monitoring; Locating A Device - HP PROCURVE 2520 Management And Configuration Manual

Monitoring and Analyzing Switch Operation

Locating a Device

Web: Configuring Port Monitoring

To enable port monitoring:
1.
2.
3.
4.
To remove port monitoring:
1.
2.
For web-based Help on how to use the web browser interface screen, click on
the
Locating a Device
If you are trying to locate a particular switch you can enter the chassislocate
command. The blue Locator LED will light up on that switch.
Syntax: chassislocate [ blink | on | off ]
B-28
Click on the Configuration tab.
Click on [Monitor Port].
To monitor one or more ports.
Click on the radio button for Monitor Selected Ports.
a.
b. Select the port(s) to monitor.
Click on [Apply Changes].
Click on the [Monitoring Off] radio button.
Click on [Apply Changes].
button provided on the web browser screen.
[?]
Locate a device by using the blue Locate LED on the front panel.
blink <1-1440>
Blinks the chassis Locate LED for a selected number of minutes
(default is 30 minutes).
on <1-1440>
Turns the chassis Locate LED on for a selected number of minutes
(default is 30 minutes).
off
Turns the chassis Locate LED off.