Cli: Modifying The Interface Access - HP PROCURVE 2520 Management And Configuration Manual

3. Use the arrow keys (
4. When you have finished making changes to the above parameters, press

CLI: Modifying the Interface Access

Interface Access Commands Used in This Section
show console
[no] telnet-server
[no] web-management
console
Listing the Current Console/Serial Link Configuration. This
command lists the current interface access parameter settings.
Syntax: show console
This example shows the switch's default console/serial configuration.
Interface Access
Enable/Disable
Console Control
Options
Figure 7-2. Listing of Show Console Command
Reconfigure Inbound Telnet Access. In the default configuration,
inbound Telnet access is enabled.
Syntax: [no] telnet-server
Interface Access: Console/Serial Link, Web, and Inbound Telnet
[v]
,
change.
Refer to the online help provided with this screen for further information
on configuration options for these features.
(for Save).
, then press
[Enter] [S]
below
below
page 7-7
page 7-8
Interface Access and System Information
[^] [<] [>]
, , ) to move to the parameters you want to
Event Log Event
Types To List
7-5