HP PROCURVE 2520 Management And Configuration Manual page 395

Downloading from Primary Only.
Syntax: copy tftp flash < ip-addr > flash [ primary | secondary ]
If you do not specify either a primary or secondary flash location for the
destination, the download automatically goes to primary flash.
For example, to download a software file from primary flash in a switch with
an IP address of 10.29.227.103 to the primary flash in the destination switch,
you would execute the following command in the destination switch's CLI:
Running Total
of Bytes
Downloaded
Figure A-7. Switch-To-Switch, from Primary in Source to Either Flash in Destination
Downloading from Either Flash in the Source Switch to Either Flash
in the Destination Switch.
Syntax: copy tftp flash < ip-addr > < /os/primary > | < /os/secondary > [ primary |
For example, to download a software file from secondary flash in a switch
with an IP address of 10.28.227.103 to the secondary flash in a destination
switch, you would execute the following command in the destination switch's
CLI:
This command (executed in the destination switch)
downloads the software flash in the source switch's primary
flash to either the primary or secondary flash in the
destination switch.
secondary ]
This command (executed in the destination switch) gives you
the most options for downloading between switches. If you do
not specify either a primary or secondary flash location for
the destination, the download automatically goes to primary
flash.
File Transfers
Downloading Switch Software
A-21