Procurve Manager Plus (Pcm+) - HP PROCURVE 2520 Management And Configuration Manual

Using ProCurve Manager (PCM) or

ProCurve Manager Plus (PCM+)

ProCurve Manager and ProCurve Manager Plus are designed for installation
on a network management workstation. For this reason, the system require­
ments are different from the system requirements for accessing the switch's
web browser interface from a non-management PC or workstation. For PCM
and PCM+ requirements, refer to the information provided with the software.
This procedure assumes that:
■
■
To establish a web browser session with PCM or PCM+ running, do the
following on the network management station:
1. Make sure the Java
2. In the Interconnected Devices listing under Network Manager Home (in the
3. The web browser interface automatically starts with the Status Overview
N o t e
If the Registration window appears, click on the Status tab.
You have installed the recommended web browser on a PC or workstation
that serves as your network management station.
The networked device you want to access has been assigned an IP address
and (optionally) a DNS name, and has been discovered by PCM or PCM+.
(For more on assigning an IP address, refer to "IP Configuration" on page
8-2.)
TM
applets are enabled for your web browser. If they
are not, refer to the web browser online Help for specific information on
enabling the Java applets.
PCM/PCM+ sidebar), right-click on the model number of the device you
want to access.
window displayed for the selected device, as shown in Figure 5-1.
Using the ProCurve Web Browser Interface
Starting a Web Browser Interface Session with the Switch
5-5