Menu: Configuring Port And Static Trunk Monitoring - HP PROCURVE 2520 Management And Configuration Manual

Monitoring and Analyzing Switch Operation
Interface Monitoring Features

Menu: Configuring Port and Static Trunk Monitoring

This procedure describes configuring the switch for monitoring when moni­
toring is disabled. (If monitoring has already been enabled, the screens will
appear differently than shown in this procedure.)
1. From the Console Main Menu, Select:
Figure B-18. The Default Network Monitoring Configuration Screen
2. In the Actions menu, press
3. If monitoring is currently disabled (the default) then enable it by pressing
4. Press the down arrow key to display a screen similar to the following and
B-24
2. Switch Configuration...
3. Network Monitoring Port
the Space bar (or ) to select Yes.
[Y]
move the cursor to the Monitoring Port parameter.
Enable monitoring
by setting this
parameter to "Yes".
[E] (for Edit).