Operating Notes - HP PROCURVE 2520 Management And Configuration Manual

Hewlett-packard switch user manual
Hide thumbs Also See for PROCURVE 2520:
Table of Contents

Advertisement

Troubleshooting
DNS Resolver

Operating Notes

C-78
Configuring another IP address for a priority that has already been
assigned to an IP address is not allowed. To replace one IP address at a
given priority level with another address having the same priority, you
must first use the no form of the command to remove the unwanted
address. Also, only one instance of a given server address is allowed in
the server list. Attempting to enter a duplicate of an existing entry at a
different priority level is not allowed. To change the priority of an existing
server address, use the no form of the command to remove the entry, then
re-enter the address with the new priority.
To change the position of an address already configured with priority x,
you must first use no ip dns server-address priority x < ip-addr > to remove
the address from the configuration, then use ip dns server-address priority
< ip-addr > to reconfigure the address with the new priority. Also, if the
priority to which you want to move an address is already used in the
configuration for another address, you must first use the no form of the
command to remove the current address from the target priority.
The DNS server(s) and domain configured on the switch must be
accessible to the switch, but it is not necessary for any intermediate
devices between the switch and the DNS server to be configured to
support DNS operation.
When multiple DNS servers are configured on the switch, they can
reside in the same domain or different domains.
A DNS configuration must include the IP address for a DNS server
that is able to resolve host names for the desired domain. If a DNS
server has limited knowledge of other domains, then its ability to
resolve DNS-compatible command requests is also limited.
If the DNS configuration includes a DNS server IP address but does
not also include a domain suffix, then any DNS-compatible
commands should include the target host's fully qualified domain
name. Refer to Figure C-27 on page C-72.
Switch-Initiated DNS packets go out through the VLAN having the
best route to the DNS server, even if a Management VLAN has been
configured.
The DNS server address must be manually input. It is not automati­
cally determined via DHCP.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents