HP PROCURVE 2520 Management And Configuration Manual page 66

Using the Command Line Interface (CLI)
Using the CLI
Table 4-1. Privilege Level Hierarchy
Privilege Example of Prompt and Permitted Operations
Level
Operator Privilege
Operator Level ProCurve>
Manager Privilege
Manager Level ProCurve
Global
ProCurve(config)#
Configuration
Level
Context
ProCurve(eth-5)#
Configuration
ProCurve(vlan­
Level
100)#
4-6
show < command >
setup
ping < argument >
link-test < argument >
enable
menu
logout
exit
#
View status and configuration information.
Perform connectivity tests.
Move from the Operator level to the Manager
level.
Move from the CLI interface to the menu interface.
Exit from the CLI interface and terminate the
console session.
Terminate the current session (same as logout).
Perform system-level actions such as system
control, monitoring, and diagnostic commands,
plus any of the Operator-level commands. For a list
of available commands, enter
Execute configuration commands, plus all
Operator and Manager commands. For a list of
?
available commands, enter
Execute context-specific configuration
commands, such as a particular VLAN or switch
port. This is useful for shortening the command
strings you type, and for entering a series of
commands for the same context. For a list of
?
available commands, enter
?
at the prompt.
at the prompt.
at the prompt.