Command Syntax And Displayed Information; Configuration And Operation Examples; Command Syntax Statements; Protocol Acronyms - HP PROCURVE 2520 Management And Configuration Manual

Getting Started

Introduction

Introduction
This guide is intended for use with the following switches:
■
■
It describes how to use the command line interface (CLI), Menu interface, and
web browser to configure, manage, monitor, and troubleshoot switch opera­
tion. For an overview of other product documentation for the above switches,
refer to "Product Documentation" on page xi. You can download documenta­
tion from the ProCurve Networking web site, www.procurve.com.

Conventions

Configuration and Operation Examples

Unless otherwise noted, examples using a particular switch model apply to all
switch models covered by this guide.

Protocol Acronyms

IP Refers to the IPv4 protocol unless otherwise noted.
IPv6 Refers to the IPv6 protocol.

Command Syntax and Displayed Information

Command Syntax Statements

Syntax: ip < default-gateway < ip-addr >> | routing >
Syntax: show interfaces [port-list ]
■
■
■
1-2
HP ProCurve 2520-8-PoE Switch
HP ProCurve 2520-24-PoE Switch
Vertical bars ( | ) separate alternative, mutually exclusive elements.
Square brackets ( [ ] ) indicate optional elements.
Braces ( < > ) enclose required elements.