Page of 8
   
HP StorageWorks Simple SAN
Connection Manager 2.20 release notes
Part number: 5697-0120
Seventh edition: July 2009

Advertising

   Related Manuals for HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

   Summary of Contents for HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

  • Page 1

    HP StorageWorks Simple SAN Connection Manager 2.20 release notes Part number: 5697-0120 Seventh edition: July 2009...

  • Page 2

    Legal and notice information © Copyright 2008-2009 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

  • Page 3: System Requirements

    Description The HP StorageWorks Simple SAN Connection Manager (SSCM) is a GUI-based management application for basic management of storage area network (SAN) components, such as host bus adapters (HBAs), switches, and storage arrays. The SSCM uses Microsoft's Virtual Disk Service (VDS) to manage storage arrays.

  • Page 4

    • 512 MB of memory • 200 MB of disk space • One 2-GHz processor • One CD-ROM drive • One Ethernet port • One or more PCI-e slots for the HP StorageWorks 81Q PCI-e Fibre Channel HBA (or other supported QLogic Fibre Channel HBAs) •...

  • Page 5

    If this occurs, the CD can be mounted with the no-execution flag, causing the installation script to fail. Installation failure may be indicated by the following error message: # ./install_smb.sh bash: ./install_smb.sh: /bin/sh: bad interpreter: Permission denied Workaround: Manually unmount the installation CD. For example, if the CD was automounted in /media/HpInstallx.x, enter the following commands to remount the CD: # unmount /media/HpInstallx.x # mkdir —p /mnt/cdrom...

  • Page 6

    MSA1x00 issues • MSA LUN name between Array Configuration Utility (ACU) and SSCM does not match: LUN names created by the MSA ACU and SSCM do not match when displayed. The ACU LUN name is partly shown in SSCM as LUN identification. MSA hardware provider memory leak: The HP MSA hardware provider installed with SSCM has •...

  • Page 7

    • SSCM fails to start: If you install SSCM with the MSA only option, and HP Command View EVA is installed, SSCM will fail to start. The error RegOpenKeyEx failed with error 2: The system cannot find the file specified is displayed when you attempt to start SSCM. Workaround: To correct this problem, reinstall SSCM and select the EVA only or the EVA and MSA option if an array is present in the configuration.

  • Page 8

    • Creating partitions on the management station: Deleting LUNs presented to the management station may cause errors if new LUNs are created immediately after the old LUNs are deleted. The new LUNs may not be initialized and a drive letter not assigned. Workaround: Reboot the management station after deleting any LUNs that were presented to the management station.

This manual also for:

353803-b22 - storageworks modular smart array 1000 san starter, Connection manager 2.20

Comments to this Manuals

Symbols: 0
Latest comments: