Connecting Your Esi Phone - ESI IVX S-Class User Manual

User's Guide

Connecting your ESI phone

Use the diagram (below) to connect your ESI phone. The diagram represents the panel on the
phone's underside.
Note: The "Top of phone" and "Bottom of phone" references in this diagram shows the correct vertical
orientation of the phone — i.e., the part with the display is the top.
Handset
Line cord
to wall
To (TAPI)
headset to PC
Handset
To 60-Key Line cord
Console to wall
Connectors on bottom of
48-Key Digital Feature Phone
(headset jack shown)
Note: Use the wall mount hook (located under the handset) when the phone is in the furthest upright position.
12-Key Feature Phone
24-Key Feature Phone
•
Connects like a basic phone.
•
Handset plugs into right-side jack.
•
Line cord plugs into left-side jack.
48-Key Digital Feature Phone
In addition to how the 24-Key Feature Phone connects
to the handset and line cord, note the following:
•
TAPI version includes a cable for connecting to your
PC's serial port.
•
60-Key Expansion Console cable (included with each
Console) uses standard RJ-11 telephone connectors.
Introduction
A.7