ESI IVX S-Class User Manual page 74

Analog stations
Functions available during analog station voice mail message retrieval
Note: Functions tinted gray, below, either change or are not available when you're using an ESI Feature
Phone (see page D.4).
Key Function
1 Pause
2 Hear time/date
4 Back up (rewind)
5 Access user programming
6 Move
7 Delete
8 Main greeting
9 Save
9 9 Save as new
0 Operator
# To other mailbox
To disconnect
Retrieving messages from another user's ESI Feature Phone
Press VOICE MAIL and dial your extension number. Follow the procedures described previously
(see page G.5).
G.6
Description
Pauses for one minute or until 1 is pressed again.
Pauses the message, plays the time/date of when the message
was left and resumes.
When pressed during message playback, rewinds 4 seconds for
each key press. If pressed after the message has finished, it
returns you to the beginning of the message.
Accesses user programming menu.
Moves a copy of the message to another User's mailbox.
To move the message without an introduction, press 6
when prompted.
To add an introduction, press 1 when prompted. When you've
finished your recording, press 1 to stop; You will be returned to the
original message in your mailbox.
Deletes the message from the mailbox (see "Message Recycle
Bin," page D.8).
Goes to the main greeting (if your system is using the built-in auto
attendant).
Saves the message (it will be played as an old message the next
time messages are picked up).
Saves the message as new.
Transfers you to the operator.
To leave a message in another User's mailbox.
Always press before hanging up (pressing it during message
playback saves the message and any other unsaved messages).
User's Guide