ESI IVX S-Class User Manual page 63

User's Guide
Manual day/night mode (Code 560)
You can use a programmable feature key to manually change the system's main auto-attendant
greeting, incoming call destinations, and CO line group access.
display switches among: DAY, NGT, DAY2, NGT2, HDAY (holiday) or AUTO.
Tip: To keep the system from being taken out of this mode, place it in auto and then delete the programmable
feature key's programming.
Notes: The System Administrator can also change the mode and/or re-record the holiday greeting remotely to
handle unexpected closings, such as for inclement weather.
Headset key (Code 564)
Note: It's unnecessary to program this key on an ESI Cordless Handset; one simply plugs in or unplugs a
headset as desired.
This key provides for easy connecting to/disconnecting from calls when operating in headset mode (see
"Headset operation," page F.10). Press the key to receive dial tone or to answer a ringing call. Press the
key again or press RELEASE to disconnect from the call.
Call-forward key (Code 565 or 565XXX)
Note: The 48-Key Feature Phone has a dedicated call-forward key (CFWD).
If you frequently call-forward your phone (see "Call forwarding," page E.9), you can program a
programmable feature key as a call forwarding key to automatically turn forwarding on and off. If you
always forward to the same extension, you can program a key with both 5 6 5 and the extension number.
Redial (Code 566)
This redials the outbound number (i.e., not internal extension) most recently dialed from your station.
Call-forward/no-answer key (Code 567)
Note: Not available on an ESI Cordless handset.
Enables or disables the call-forwarding/no-answer feature. When this feature is enabled and someone
calls your station but receives no answer, the call will go to the destination you've programmed (for
more details, see page E.9). The difference between this feature (Code 567) and traditional call
forwarding (Code 565) is that, with this feature, your phone actually rings first before going to the
selected destination.
Message monitor key (Code 568)
Easily toggle the message monitor mode on or off with this key. (Otherwise, you can perform the toggle
by pressing PROGRAM 3 6 and following the prompts.)
Background announce key (Code 569)
During call waiting, you can also make a brief, private background announcement (see "Background
announce feature," page E.12) to the station's earpiece (if the station user has enabled this feature).
Hold down the key until you hear a beep, then begin talking; release the key when finished.
1
Depending on how the Installer has programmed your system, day and night mode for incoming calls and CO line group access
may not change upon use of this key.
2
AUTO indicates that the system will follow the day/night mode tables programmed by the Installer.
1
Each time the key is pressed, the
2
Special keys
F.13