Table of Contents
Advertisement
Xantrex_PRO1800.book Page 4 Tuesday, April 24, 2007 11:33 AM
Installation
Installation Codes
Governing installation codes vary depending on the location and type of
installation. Electrical installations must meet local and national wiring
codes and should be performed by a qualified electrician.
In residential applications, electrical codes do not allow permanent
connection of AC distribution wiring to the inverter's AC output
receptacles. The receptacles are intended for temporary (as-needed)
connection of cord connected loads only.
Calculating Battery Requirements
Battery type and battery size strongly affect the performance of the XM
1800. Therefore, you need to identify the type of loads your inverter will
be powering, and how much you will be using them between charges.
Once you know how much power you will be using, you can determine
how much battery capacity you need. Xantrex recommends that you
purchase as much battery capacity as possible.
Consult Appendix B, "Battery Types" for a detailed explanation of how to
determine the appropriate number and size of batteries for your needs.
CAUTION
The XM 1800 must only be connected to a 12 volt battery system. It will not
operate if connected to a 6 volt battery, and will be damaged if connected to a
battery of 16 volts or more.
Choosing an Effective Charging System
The charging system must be appropriate for your particular installation.
A well-designed charging system will ensure that power is available when
you need it and that your batteries remain in top condition. Inadequate
charging will degrade system performance, and the wrong type of charger
will reduce battery life.
Consult Appendix C, "Alternators and Charging Systems" for
information about choosing an effective charging system.
3–4
975-0263-01-01
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
