Installing The Remote Panel - Xantrex XM 1000 Owner's Manual

Xantrex_PRO1800.book Page 26 Tuesday, April 24, 2007 11:33 AM
Installation

Installing the Remote Panel

You can detach and reinstall the remote panel to monitor and operate the
XM 1800 up to 25 feet (7.62 m) away from the unit.
Figure 3-8 XM 1800 with Remote Panel Removed
To install the remote panel in another location, you will need the following
tools and materials:
• screwdriver
• jigsaw
• drill (optional)
• RJ11 extension cord, with male and female jacks, with a maximum
length of 25 feet (7.62 m).
To install the remote panel in another location:
1. Turn the XM 1800 off.
2. Ensure AC input power is disconnected.
3. Remove the two screws securing the remote panel to the XM 1800 and
set them aside.
4. Remove the remote panel and unplug the remote panel RJ11 cord from
the jack (see Figure 3-8).
3–26
RJ11 jack
XM 1000 shown
975-0263-01-01