Table Of Events - IBM Network Management Card User Manual

Table of Contents

Advertisement

Table 39. UPS time-dated alarms (continued)
Alarm on
Positive DC bus too high
Negative DC bus too low
Positive DC bus too low
Inverter limitation
Inverter fuses blown
Inverter fault
Inverter overload
Inverter overtemperature
Inverter short circuit
Inverter thermal overload
Load not protected; on automatic bypass
Load short circuit
Load not powered
Protection lost
Emergency button on
Fan fault
Redundancy lost
Low battery
UPS communication failed
UPS data base not available
UPS on battery
UPS internal fault
UPS overload
UPS overtemperature
Imminent UPS shutoff
sensor_name: Temperature is above high threshold xx°C
sensor_name: Humidity is above high threshold xx%
sensor_name: Temperature is below low threshold xx°C
sensor_name: Humidity is below low threshold xx%

Table of events

The following table lists the UPS events.
Table 40. UPS events
Alarm on
Battery fuse blown
Battery temperature fault
No battery
Battery charger fault
Charger temperature fault
76
Network Management Card : User's Guide
Alarm off
Positive DC bus OK
Negative DC bus OK
Positive DC bus OK
Inverter end of limitation
Input fuses OK
Inverter OK
Inverter load OK
Inverter temperature OK
Inverter OK
Inverter load OK
Load protected; return from bypass
Load OK
Load powered
Protection OK
Emergency button off
Fan OK
Redundancy OK
Battery OK
UPS communication restored
UPS data base OK
UPS on normal AC
UPS OK
UPS returns to normal load
UPS temperature OK
UPS OK
sensor_name: Temperature is in normal range
sensor_name: Humidity is in normal range
sensor_name: Temperature is in normal range
sensor_name: Humidity is in normal range
Alarm off
Battery fuse OK
Battery temperature OK
Battery present
Battery charger OK
Charger temperature OK

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents