Chapter 3. Using The Network Management Card Web Interface; Starting The Web Interface; Online Help - IBM Network Management Card User Manual

Chapter 3. Using the network management card web interface

This chapter describes how to use the network management card web interface.
Note: Before you can access the network management card and use the web

Starting the web interface

To start the web interface, complete the following steps:
1. Open a web browser from a computer and enter the IP address of the network
2. In the "Connect to" window, in the User name field, type USERID (all uppercase).
3. Click OK. The uninterruptible power supply (UPS) Properties page, which is the

Online help

Online contextual help in English is available through the Help link in the top-right
corner of each page. The navigation menu of the online help is identical to that of
the network management card web pages. The Help page always opens in a new
window.
© Copyright IBM Corp. 2010, 2012
interface, the Ethernet cable must be connected (see step 2 on page 11).
management card in the address field.
In the Password field, type passw0rd (all lowercase with a zero, not O).
Both the user name and password fields accept up to 10 characters. After 5
minutes have elapsed, or if the browser is closed and reopened, you must
reenter the user name and password. An error in either field results in rejection
of the requested action (such as save, page access, or card restart). After three
unsuccessful login attempts, you must restart the browser. Both the user name
and password fields are encrypted with an MD5 type algorithm, ensuring total
security. See "3 : Set Login Password to Default" on page 18 to reset the
password.
home page, is displayed. The UPS Properties page features are described in
"UPS properties" on page 20.
19