Sending Text Messages; Network Settings - IBM Network Management Card User Manual

Sending text messages

The network management card can redirect UPS alarms to an email server. The
format of these email messages is compatible with mobile telephone email/SMS
transfer systems that are used by Internet service providers (ISPs). The format that
is to be used depends on the service provider.

Network settings

Click Network from the menu to configure the network parameters of the network
management card and authorize the remote upgrade of the embedded system.
Note: If you are not already logged on, you are prompted to enter your user name
You can configure the following network management card network settings:
v BootP/DHCP: Select Enabled to authorize configuration of network parameters
38
Network Management Card : User's Guide
– The URL of the network management card, enabling a direct link with the
network management card to be established
– Attachments, as configured for the email recipients
– The subject text
and password before you access the Network Settings page.
with the BOOTP/DHCP server when the network management card is started.