Notified Applications - IBM Network Management Card User Manual

v Reset Communication: Perform a remote restart of the network management
v Factory Reset: Restore all the network management card parameters to their
v Keep TCP/IP parameters: Select this check box to maintain the IP address,

Notified applications

Use the Notified Applications page to modify a network management system (NMS)
that is set to receive notifications from the network management card or to add up
to three NMSs to the notified applications.
To modify or add a new NMS, complete the following steps:
1. Select Notified Applications from the menu. The Notified Applications page is
2. Click Modify NMS or Add NMS to open a new window in which you can modify
42
Network Management Card : User's Guide
card without modifying the configuration. This action is required for any changes
that you have made on the Network Settings page.
default settings.
subnet mask, gateway, and BOOTP/DHCP value.
Note: For security, you must click Save and enter the administrator login and
password to save modifications or run commands. The default login is
USERID (all uppercase), and the password is passw0rd (all lowercase with a
zero, not the letter O).
displayed.
or enter SNMP trap receiver information (application name, host name or IP
address, protocol, trap community, and MIB filter).