Updating Firmware - IBM Network Management Card User Manual

Notes:
1. After startup, if the network management card is in manual mode, or if no NTP
2. If the network management card is installed in an UPS that supports time

Updating firmware

To update the network management card firmware, complete the following steps.
Note: During the upgrade process, the network management card does not monitor
1. Go to http://www.ibm.com/systems/support/ and download the new firmware
2. Click Firmware Upload to open the Firmware Upload page.
3. Click Browse and select the firmware update file.
The firewall must be set to transmit queries outside the intranet. No error
message is generated if the time server contact fails.
server was reached, the card initializes at 00:00 01/01/1970.
stamping, the network management card time is automatically synchronized with
that of the UPS.
the UPS status.
version to your computer.
Chapter 3. Using the network management card web interface
47