Switch Access And Login - ZyXEL Communications GS2210 Series User Manual

Disconnect and re-connect the power adaptor or cord to the Switch.
4
If the problem continues, contact the vendor.
5

47.2 Switch Access and Login

I forgot the IP address for the Switch.
The default IP address is 192.168.1.1.
1
Use the console port to log in to the Switch.
2
If this does not work, you have to reset the device to its factory defaults. See
3
38.
I forgot the username and/or password.
The default username is admin and the default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
38.
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the Switch.
Check the hardware connections, and make sure the LEDs are behaving as expected. See
2
3.3 on page
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled.
Make sure your computer is in the same subnet as the Switch. (If you know that there are routers
4
between your computer and the Switch, skip this step.)
Reset the device to its factory defaults, and try to access the Switch with the default IP address.
5
See Section 4.6 on page
Chapter 47 Troubleshooting
30.
38.
GS2210 Series User's Guide
356
Section 4.6 on page
Section 4.6 on page
I
Section