Status: Port Details - ZyXEL Communications GS2210 Series User Manual

Intelligent layer 2 gbe switch
Hide thumbs Also See for GS2210 Series:
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 8 Status
LABEL
Port
Name
Link
State
PD
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Clear Counter

7.4.1 Status: Port Details

Click a number in the Port column in the Status screen to display individual port statistics. Use this
screen to check status and detailed performance data about an individual port on the Switch.
Chapter 7 ZON Utility, ZON Neighbor Management and Port Status
DESCRIPTION
This identifies the Ethernet port. Click a port number to display the Port Details screen
(refer to
Figure 43 on page
This is the name you assigned to this port in the Basic Setting > Port Setup screen.
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex (F for full duplex or H for half). It also shows the cable type
(Copper or Fiber) for the combo ports.
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port. See
(Section 13.1 on page 114
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
For PoE model(s) only
This field displays whether or not a powered device (PD) is allowed to receive power from
the Switch on this port.
This fields displays whether LACP (Link Aggregation Control Protocol) has been enabled on
the port.
This field shows the number of transmitted frames on this port.
This field shows the number of received frames on this port.
This field shows the number of received errors on this port.
This field shows the number of kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time in hours, minutes and seconds the port has been
up.
Enter a port number and then click Clear Counter to erase the recorded statistical
information for that port, or select Any to clear statistics for all ports.
GS2210 Series User's Guide
57).
for more information)
56

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs2210-24Gs2210-24hpGs2210-48hpGs2210-48

Table of Contents