Multicast Setup; Ipv4 Multicast Status - ZyXEL Communications GS2210 Series User Manual

Figure 121 MVR Multicast Television Example
VLAN 1
A

23.2 Multicast Setup

Use this screen to configure IGMP for IPv4 or MLD for IPv6 and set up multicast VLANs. Click
Advanced Application > Multicast in the navigation panel.
Figure 122 Advanced Application > Multicast Setup
The following table describes the labels in this screen.
Table 70 Advanced Application > Multicast Setup
LABEL
IPv4 Multicast
IPv6 Multicast
MVR

23.3 IPv4 Multicast Status

Click Advanced Application > Multicast > IPv4 Multicast to display the screen as shown. This
screen shows the IPv4 multicast group information. See
information on multicasting.
Figure 123 Advanced Application > Multicast > IPv4 Multicast
Chapter 23 Multicast
DESCRIPTION
Click the link to open screens where you can configure IGMP snooping and IGMP filtering
for IPv4.
Click the link to open screens where you can configure MLD snooping and MLD filtering for
IPv6.
Click the link to open screens where you can create multicast VLANs.
GS2210 Series User's Guide
172
S
Multicast VLAN
Section 23.1 on page 168 for more