Lldp-Med Network Policy - ZyXEL Communications GS2210 Series User Manual

32.8 LLDP-MED Network Policy

Click Advanced Application > LLDP > LLDP-MED Network Policy (Click Here) to display the
screen as shown next.
Figure 194 Advanced Application > LLDP > LLDP-MED Network Policy
The following table describes the labels in this screen.
Table 128 Advanced Application > LLDP > LLDP-MED Network Policy
LABEL
Port
Application Type
Tag
VLAN
DSCP
Priority
Add
Cancel
Index
Port
Chapter 32 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
Enter the port number to set up the LLPD-MED network policy.
Select the type of application used in the network policy.
• voice
• voice-signaling
• guest-voice
• guest-voice-signaling
• softphone-voice
• video-conferencing
• streaming-video
• video-signaling
Select to tag or untag in the network policy.
• tagged
• untagged
Enter the VLAN ID number. It should be from 1 to 4094. For priority tagged frames,
enter "0".
Enter the DSCP value of the network policy. The value is defined from 0 through 63 with
the 0 representing use of the default DSCP value.
Enter the priority value for the network policy.
Click Add after finish entering the network policy information. A summary table will list
all the Switch you've added.
Click Cancel to begin entering the information afresh.
This field displays the of index number of the network policy. Click an index number to
edit the rule.
This field displays the port number of the network policy.
GS2210 Series User's Guide
271