Configure Multiple Rapid Spanning Tree Protocol - ZyXEL Communications GS2210 Series User Manual

Table 46 Advanced Application > Spanning Tree Protocol > Status: RSTP (continued)
LABEL
Forwarding Delay
(second)
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last
Change

13.6 Configure Multiple Rapid Spanning Tree Protocol

To configure MRSTP, click MRSTP in the Advanced Application > Spanning Tree Protocol
screen. See
Figure 90 Advanced Application > Spanning Tree Protocol > MRSTP
Chapter 13 Spanning Tree Protocol
DESCRIPTION
This is the time (in seconds) the root switch will wait before changing states (that is,
listening to learning to forwarding).
Note: The listening state does not exist in RSTP.
This is the path cost from the root port on this Switch to the root switch.
This is the priority and number of the port on the Switch through which this Switch must
communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
This is the time since the spanning tree was last reconfigured.
Section 13.1 on page 114
GS2210 Series User's Guide
for more information on MRSTP.
121