12.1 Filtering Overview
This chapter discusses MAC address port filtering.
Filtering means sifting traffic going through the Switch based on the source and/or destination MAC
addresses and VLAN group (ID).
12.1.1 What You Can Do
Use the Filtering screen
Switch.
12.2 Configure a Filtering Rule
Use this screen to create rules for traffic going through the Switch. Click Advanced Application >
Filtering in the navigation panel to display the screen as shown next.
Figure 84 Advanced Application > Filtering
C
HAPTER
(Section 12.2 on page
112) to create rules for traffic going through the
GS2210 Series User's Guide
112
1 2
Filtering