Pppoe Ia Per-Port - ZyXEL Communications GS2210 Series User Manual

Table 108 Advanced Application > PPPoE > Intermediate Agent (continued)
LABEL
option
delimiter
Apply
Cancel

28.3.1 PPPoE IA Per-Port

Use this screen to specify whether individual ports are trusted or untrusted ports and have the
Switch add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent
on the Switch and there are no trusted ports.
Click the Port link in the Intermediate Agent screen to display the screen as shown.
Figure 169 Advanced Application > PPPoE > Intermediate Agent > Port
The following table describes the labels in this screen.
Table 109 Advanced Application > PPPoE > Intermediate Agent > Port
LABEL
Port
*
Chapter 28 PPPoE
DESCRIPTION
Select the variables that you want the Switch to generate and add in the Agent Circuit ID
sub-option. The variable options include sp, sv, pv and spv which indicate combinations of
slot-port, slot-VLAN, port-VLAN and slot-port-VLAN respectively. The Switch enters a zero
into the PADI and PADR packets for the slot value.
Select a delimiter to separate the identifier-string, slot ID, port number and/or VLAN ID
from each other. You can use a pound key (#), semi-colon (;), period (.), comma (,),
forward slash (/) or space.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This field displays the port number.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
GS2210 Series User's Guide
238