Figure 92 Advanced Application > Spanning Tree Protocol > MSTP
The following table describes the labels in this screen.
Table 49 Advanced Application > Spanning Tree Protocol > MSTP
LABEL
DESCRIPTION
Port
Click Port to display the MSTP Port screen (see
Status
Click Status to display the MSTP Status screen (see
Active
Select this to activate MSTP on the Switch. Clear this to disable MSTP on the Switch.
Note: You must also activate Multiple Spanning Tree in the Advanced Application >
Chapter 13 Spanning Tree Protocol
Spanning Tree Protocol > Configuration screen to enable MSTP on the Switch.
GS2210 Series User's Guide
125
Figure 93 on page
127).
Figure 94 on page
129).