Vlan Configuration; Configure A Static Vlan - ZyXEL Communications GS2210 Series User Manual

9.3 VLAN Configuration

Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click Advanced
Application > VLAN > VLAN Configuration to see the follwing screen.
Figure 67 Advanced Application > VLAN > VLAN Configuration
The following table describes the labels in the above screen.
Table 31 Advanced Application > VLAN > VLAN Configuration
LABEL
Static VLAN Setup
VLAN Port Setup
Subnet Based VLAN Setup
Protocol Based VLAN Setup Click Click Here to configure the Protocol Based VLAN for the Switch.
Voice VLAN Setup
MAC Based VLAN Setup

9.4 Configure a Static VLAN

Use this screen to configure a static VLAN for the Switch. Click Static VLAN in the VLAN Status
screen to display the screen as shown next.
Chapter 9 VLAN
DESCRIPTION
Click Click Here to configure the Static VLAN for the Switch.
Click Click Here to configure the VLAN Port for the Switch.
Click Click Here to configure the Subnet Based VLAN for the Switch.
Click Click Here to configure the Voice VLAN for the Switch.
Click Click Here to configure the MAC Based VLAN for the Switch.
GS2210 Series User's Guide
91