ZyXEL Communications GS2210 Series User Manual page 57

Chapter 7 ZON Utility, ZON Neighbor Management and Port Status
Figure 43 Status > Port Details
The following table describes the labels in this screen.
Table 9 Status: Port Details
LABEL DESCRIPTION
Port Info
Port NO. This field displays the port number you are viewing.
Name This field displays the name of the port.
Link This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the cable type
(Copper or Fiber).
Status If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port. See
(Section 13.1 on page 114
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
RxPkts This field shows the number of received frames on this port
for more information).
GS2210 Series User's Guide
57