Figure 54 Basic Setting > IPv6 > IPv6 Interface Status
The following table describes the labels in this screen.
Table 19 Basic Setting > IPv6 > IPv6 Interface Status
LABEL
DESCRIPTION
IPv6 Active
This field displays whether the IPv6 interface is activated or not.
MTU Size
This field displays the Maximum Transmission Unit (MTU) size for IPv6 packets on this
interface.
ICMPv6 Rate
This field displays the maximum number of ICMPv6 error messages which are allowed to
Limit Bucket
transmit in a given time interval. If the bucket is full, subsequent error messages are
Size
suppressed.
ICMPv6 Rate
This field displays the time period (in milliseconds) during which ICMPv6 error messages of
Limit Error
up to the bucket size can be transmitted. 0 means no limit.
Interval
Stateless
This field displays whether the Switch's interface can automatically generate a link-local
Address
address via stateless autoconfiguration.
Autoconfig
Link Local
This field displays the Switch's link-local IP address and prefix generated by the interface. It
Address
also shows whether the IP address is preferred, which means it is a valid address and can be
used as a sender or receiver address.
Chapter 8 Basic Setting
GS2210 Series User's Guide
76