Table of Contents
Advertisement
NAV Series TCP/IP Standalone Network Access Controller
Chapter
12
12 Access Rule
12.1 Date Type
Click the "Access Control" "Access Rule," select "Date Type" to enter the date setting
page; see the figure below:
Figure 12-1 Date setting
12.1.1 Add Date
In the operating button region, click the "Add" button, then the dialog box reading "Add
Date" pops up.
Figure 12-2 Add date
The controller supports the setting of 10 date types, including from Sunday to Saturday (7
types), user‐defined 1, user‐defined 1, and user‐defined 3, of which Sunday to Saturday are
automatically set according to the calendar and user can define the user‐defined 1,
user‐defined 1 and user‐defined 3 as required.
In this manual, the user‐defined 1, user‐defined 1 and user‐defined 3 are all regarded as
holidays. Holiday setting refers to the three date types. The EverFocusFlex controller
supports 255 holiday settings.
Cycling Type
The software allows flexible holiday settings according to three different standards. The
77
Advertisement
Table of Contents
