NAV Series TCP/IP Standalone Network Access Controller
Chapter
6
6 Getting Started
This chapter will instruct how to rapidly set the EFC301 TCP/IP‐based Access Control
integrated device through the browser using the identity of a super administrator and how
to realize door open by swiping a card, Attendance and CCTV linking functions.
6.1 Quick Start
6.1.1 Set Access Access Rule
6.1.1.1 Set Date
Click the menu bar "Access Control" "Access Rule" "Date Settings" to enter the
interface of data settings. Following are instructions for how to add a date (for detailed
settings, please refer to page 77, 12.1.1Add Date).
Operation Procedures:
1) Select date cycling type.
2) Select date in the calendar.
3) Select date type.
4) Input remarks.
5) Click the "Save" button.
6.1.1.2 Set Door Region Design
Click the menu bar "Access Control" "Access Rule" "Door Region Scheme Settings" to
enter the interface of door region scheme settings. Following are instructions for how to
add a door region design (for detailed settings, please refer to page 78,12.2Door ).
Operation Procedures:
1) Input the name of a new design in the textbox.
2) Click the time period of "Date Settings," set time period and door region authentication
mode in the pop‐up dialog box, save and close the dialog box.
3) Click the "Save" button to save the design.
6.1.1.3 Set Control Group Scheme
Click the menu bar "Access Control" "Access Rule" "Control Group Scheme Settings"
to enter the interface of control group scheme settings. Following are instructions for how
to add a control group scheme (for detailed settings, please refer to page 80,12.3.1Add
Group Sche).
Operation Procedures:
1) Click the "Add" button to enter the design adding page.
2) Input the name of a new design in the textbox of "Design Name."
3) Click the time period of "Date Settings," a dialog box will pop up, in which the time
41