Set Group Schedule - EverFocus EFC301 User Manual

NAV Series TCP/IP Standalone Network Access Controller
1) In the control group scheme setting page, check the control scheme to be deleted.
2) Click the "Delete" button.
3) The confirmation box "Confirm delete?" pops up.
4) Click "OK," then the selected control group is deleted.

12.3.3 Set Group Schedule

Click one control group scheme in the control group scheme list and click the "Edit" button
to enter the control group scheme setting page; see the figure below:
Figure 12-8 Edit control group scheme
By default, the date time periods allow free entry/exit. In case it is required to respectively
set the date time periods in the schemes, in the control scheme setting page, left click
"Date Setting" in the selected date type, then the following time period setting page pops
up:
Figure 12-9 Set time period and authentication mode
Input times in the start time and end time, select the door entry/exit mode during the time
period and then click the "Apply" button to finish the setting. After setting and changing all
the entry/exit modes, click the "Save" button and click the "Return" button to return the
scheme setting page.
After setting the date time period of the control scheme, click the "Save" button to save the
setting. See the figure below:
81