Set Backlight; Restore Factory Setting - EverFocus EFC301 User Manual

Set timeout and press "#" to confirm. The default timeout of the system is 1 min.
The Timeout Time includes password Timeout Time and keyboard operation timeout.

4.4.10 Set Backlight

In the "System Setting" menu, scroll to the "Set Backlight" menu item and press "#" to
enter the "Set Backlight" interface.
Press "#" to toggle between the "Normal Open" state and the "Automatic Control" state of
the backlight. Automatic control refers to the backlight that will be on for every keystroke
operation or card swiping. If there is no subsequent operation, the backlight will turn off
after 1 min. Press "*" to exit. The setting will be finalized on exit.

4.4.11 Restore Factory Setting

This function can restore the controller to the default setup.
In the "System Setting" menu, scroll to the "Restore Factory Setting" menu item and press
"#" to enter the "Restore Factory Setting" interface.
Set SYS Password
Set ARM Password
Erase All Events
Timeout Time
Timeout Time
000 Min 10 Sec
Cancel
Set ARM Password
Erase All Events
Timeout Time
Set Backlight
System Backlight
Self-motion
［#］to toggle
NAV Series TCP/IP Standalone Network Access Controller
OK
System Backlight
normal open
［#］to toggle
23