Erase All Events; Timeout Time - EverFocus EFC301 User Manual

NAV Series TCP/IP Standalone Network Access Controller
After inputting a new system administration password twice, press "#" to confirm and the
system will display whether the new password takes effect. If the passwords entered are
different, the system will prompt to reset.

4.4.8 Erase All Events

The controller can record all events occurring after being powered. When the event records
are full (the maximum number of event records is 1,000,000 events), the new event records
will overwrite the earliest event records.
All event records can be cleared through the following instructions. In the System Setting
menu, scroll to the "Erase All Events" menu item and press "#" to enter the "Erase All
Events" interface.
The system will prompt the user to re‐confirm that all the event records will be deleted and
will be unrecoverable after pressing "#."

4.4.9 Timeout Time

In the "System Setting" menu, scroll to "Timeout Time" menu item and press "#" to enter
the "Timeout Time" interface.
Input SYS PIN
_ _ _ _ _ _
Cancel OK
Setting updated
successfully
Auto Daylight
Set SYS Password
Set ARM Password
Erase All Events
Are you sure to
erase all eve-nts
record?
Cancel OK
Repeat:
_ _ _ _ _ _
Cancel OK
Passwords mismatch
Please retry
Device is oper
-ating OK
22