Delete Access Group - EverFocus EFC301 User Manual

NAV Series TCP/IP Standalone Network Access Controller
Figure 12-12 Add control group
Operation Procedures:
1) Input the name of a new control group in the textbox after the name of the control
group.
2) Select the unlocking levels corresponding to the locks.
3) Select the name of the control group scheme or the door scheme.
4) Click the "Save" button to finish control group adding.
Click the "Scheme" button, then the page will switch to the control group scheme page.

12.4.2 Delete Access Group

Operation Procedures:
1) In the control group scheme setting page, check the control group to be deleted.
2) Click the "Delete" button;
3) The confirmation box "Confirm delete?" pops up;
4) Click "OK," then the selected control group is deleted.
83