Input 4 digits in range of 0000~9999, and Press "#" to confirm and the setting will take
effect. Press "*" to exit without applying the settings.
4.7.6 Set Network
In the system main menu, scroll to the "Set Network" menu item with numerical key "2" or
"8" and press "#" to enter this menu item. In the submenu items, scroll to select IP Address
Setting, Gateway Setting, Netmask Setting and DNS Setting.
4.7.7 DHCP Setting
Scroll to the "DHCP Setting" menu item and press function key "#" or numerical keys "5" or
"6" to enter the setting menu.
Press "#" key to switch between "ON" and "OFF". Press "*" to confirm the DHCP status
setting and exit.
If DHCP is ON, it will get an IP address after controller connected to internet.
4.7.8 IP Address Setting
Scroll to the "IP Address Setting" item and press the function key "#" or numerical keys "5"
or "6" to enter the interface.
Input the IP address to be set and press "#" to confirm. Press " * " to exit. Factory default IP
NAV Series TCP/IP Standalone Network Access Controller
Address:
0000
Cancel
OK
DHCP Setting
Set IP Address
Reset Network Setting
DHCP Setting:
OFF
[#]To toggle
IP:
___.___.___.___
Cancel
OK
35