Add User - EverFocus EFC301 User Manual

NAV Series TCP/IP Standalone Network Access Controller
Function
Editing Region

7.4.1 Add User

In the page, click the "Add" button in "Function Editing Region," then the user addition page
pops up (see Figure 7‐5). Input the login name, username, password and User Group name
and click the "Save" button to add a new user to the user list in the page.
Login name: The name for the user to log in and use the software, which can be any
combination of figures, letters, spaces, Chinese characters and other displayable characters.
The longest login name is 20 bits and any character occupies 1 bit. The letters of the login
name are case sensitive. The login name cannot be the same as an existing user login name
and cannot be empty. If the user inputs an existing login name, the system will prompt that
the login name has already been used when saving it.
Username: The true name of user. This item is for facilitating system management and must
be filled in.
Password: Any combination of figures, letters, spaces, Chinese characters and other
displayable characters. The longest login name is 20 bits and any character occupies 1 bit.
The letters of the login name are case sensitive.
Confirm password: Must be the same as the input content of the password. If the two
passwords input are not consistent with each other, the system will prompt that "Input
Password Do Not Match."
Name of User Group: Name of the User Group to which the user belongs. The
administrator can allocate the new user to any User Group and the User Group of the
system administrator can operate all functional modules.
User Query Region
User Information
Region
Figure 7-4 User Setting
Figure 7-5 Add user
56