Alarm Setting - EverFocus EFC301 User Manual

NAV Series TCP/IP Standalone Network Access Controller
11.1.1.2 Card Reader Setting
In the card reader setting region, the user can conduct the following settings of the card
reader: Card read input waiting time and card reader in door exit position or door entry
position.
Input Waiting Time: The time allowed for inputting a password when opening the door or
carrying out other operations with passwords. If the time is longer than the waiting time,
the input box will be canceled.
Door Exit: Indicates if the card reader is in door entry position or door exit position. If the
item is checked, it indicates that the card reader is in the door exit position.
After inputting the waiting time in the card reader information textbox or checking whether
the card reader is in the door exit position or not, Click the "Save" button to finish the
operation.
11.1.1.3

Alarm Setting

In the alarm setting page, the user can configure whether the controller alarm output is
triggered in case of an event alarm of the controller and configure the alarm output time.
Check a certain alarm and change the alarm duration in the alarm time information box.
Click the "Save" button. Then, the alarm related information is changed.
Figure 11-3 Alarm time
76