Delete Card - EverFocus EFC301 User Manual

User can swipe the card or manually input the card number and then press "#" to confirm.
Then the system will add this card to the controller. If the card already exists in the system,
the system will show: Card Already Exists.

4.5.2 Delete Card

The user can directly delete the card from the controller through the card number or delete
all cards at one time. In the "Card Setting" submenu, scroll to the "Delete Card" menu item
and press "#" to enter the "Delete Card" submenu. Users can choose between the two card
deletion methods.
4.5.2.1 Delete One Card
The controller can delete one card through its card number. The card number
corresponding to the card to be deleted has to be inputted manually or by swiping the card.
In the "Delete Card" submenu, scroll to the "Delete One Card" menu item and press "#" to
enter the "Delete One Card" interface. The system will request the user to input the card
number.
After inputting the card number, press "#" and the system will prompt: "Delete Card?" Press
"#" to delete. If the card does not exist in the system, the system will show: "Unknown
Card."
Index #.: 00001
Card ID:
_ _ _ _ _ _ _ _ _ _ _
Cancel OK
Added Card
successfully
Add Card
Delete Card
Set Card Properties
Please card or input
card ID..
_ _ _ _ _ _ _ _ _ _ _
NAV Series TCP/IP Standalone Network Access Controller
Index #.: 00001
Card ID:
000009251887
Cancel OK
Card already existed
Delete One Card
Delete All Cards
Please card or input
card ID..
000009251887
25