Table of Contents
Advertisement
NAV Series TCP/IP Standalone Network Access Controller
Figure 7-7 Search user
7.5 Local Server
The Local Server can set the IP, time, data and time zone of the currently logged‐in
controller.
Click the system main menu "System" "Basic Setting" "Local Server" to enter the Local
Server page. See Figure 7‐8.
Figure 7-8 Local Server
Click the IP type as in the above figure, select static or dynamic type, input IP, subnet mask
and gateway in the textbox, confirm and click the "OK" button. The page will display this
prompt dialog box:
Click "OK" again and re‐log in to the controller using the changed IP address.
Click the "Reset" button to read and display the network settings in the current controller in
the page input box.
Click the "Synchronize with Local Time" button and the time of the controller will
synchronize with the local time. The required time can also be set by the user. Click the "Set"
58
Advertisement
Table of Contents
