Page 1 Thomson TG576 v7 and TG585 v7 Residential DSL Gateway CLI Reference Guide R7.4...
Page 3 Thomson TG576 v7 and TG585 v7 CLI Reference Guide R7.4...
Page 4 THOMSON. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies that may appear in this document.
Page 5: Table Of Contents
Contents Contents: ? Command....................25 .. Command....................27 atm Commands....................29 atm cac config............................. 31 atm cac list............................32 atm cac overbooking.......................... 33 atm debug aal5stats..........................34 atm debug gstats..........................35 atm debug portstats..........................36 atm flush.............................. 37 atm ifadd.............................. 38 atm ifattach............................39 atm ifconfig............................40 atm ifdelete............................
Page 6 Contents atm qosbook config..........................60 atm qosbook ctdadd........................... 61 atm qosbook ctddelete........................62 atm qosbook ctdlist..........................63 atm qosbook delete..........................64 atm qosbook flush..........................65 atm qosbook list..........................66 autopvc Commands..................67 autopvc config............................. 68 autopvc list............................69 config Commands..................71 config delete............................72 config dump............................73 config flush............................
Page 7 Contents connection unbind..........................97 cwmp Commands..................99 cwmp config............................100 cwmp debug traceconfig........................102 cwmp server config.......................... 103 debug Command..................105 dhcp Commands..................107 dhcp client debug clear........................111 dhcp client debug stats........................112 dhcp client debug traceconfig......................113 dhcp client flush..........................114 dhcp client ifadd..........................115 dhcp client ifattach..........................116 dhcp client ifconfig..........................117...
Page 8 Contents dhcp relay list............................ 138 dhcp relay modify..........................139 dhcp relay ruleadd..........................140 dhcp relay ruledelete........................141 dhcp rule add............................ 142 dhcp rule debug traceconfig......................143 dhcp rule delete..........................144 dhcp rule flush..........................145 dhcp rule list............................146 dhcp server config..........................147 dhcp server debug clear........................148 dhcp server debug stats........................149 dhcp server debug traceconfig......................
Page 9 Contents dhcp server pool ruleadd......................... 176 dhcp server pool ruledelete......................177 dhcp spoofing add..........................178 dhcp spoofing attach........................179 dhcp spoofing config........................180 dhcp spoofing debug traceconfig....................181 dhcp spoofing delete........................182 dhcp spoofing detach........................183 dhcp spoofing flush.......................... 184 dhcp spoofing list..........................185 dhcp spoofing option-add........................
Page 10 Contents dsd Commands..................213 dsd config............................214 dsd debug config..........................215 dsd debug connection list........................216 dsd debug proxy..........................217 dsd debug recycling..........................218 dsd debug stats..........................219 dsd intercept config.......................... 220 dsd syslog config..........................221 dsd syslog list............................222 dsd urlfilter config..........................223 dsd urlfilter rule add.........................
Page 11 Contents eth Commands...................247 eth bridge add........................... 251 eth bridge clear..........................252 eth bridge config..........................253 eth bridge delete..........................254 eth bridge dynvlan actlist.........................255 eth bridge dynvlan add........................256 eth bridge dynvlan config........................ 257 eth bridge dynvlan delete........................ 258 eth bridge dynvlan flush........................259 eth bridge dynvlan list........................260 eth bridge flush..........................
Page 12 Contents eth bridge vlan ifadd........................288 eth bridge vlan ifconfig........................289 eth bridge vlan ifdelete........................290 eth bridge vlan iflist..........................291 eth bridge xtratag add........................292 eth bridge xtratag config........................293 eth bridge xtratag delete........................294 eth bridge xtratag flush........................295 eth bridge xtratag list........................296 eth device ifconfig..........................297 eth device iflist..........................
Page 13 Contents eth vlan add............................325 eth vlan delete...........................326 eth vlan flush.............................327 eth vlan list............................328 exit Command....................329 expr Commands..................331 expr add............................. 332 expr delete............................335 expr flush............................336 expr list...............................337 expr modify............................338 firewall Commands..................341 firewall chain add..........................342 firewall chain delete..........................343 firewall chain flush..........................344 firewall chain list..........................
Page 14 Contents grp config............................366 grp flush............................. 367 grp rip config.............................368 grp rip flush............................369 grp rip ifconfig...........................370 grp rip show............................371 grp rtlist..............................372 help Command...................373 hostmgr Commands..................375 hostmgr add............................376 hostmgr clear.............................377 hostmgr config..........................378 hostmgr delete..........................379 hostmgr flush............................ 380 hostmgr list............................381 ids Commands...................
Page 15 Contents igmp host ifconfig..........................402 igmp host iflist..........................403 igmp host list.............................404 igmp proxy config..........................405 igmp proxy debug clear........................406 igmp proxy debug stats........................407 igmp proxy debug traceconfig......................408 igmp proxy flush..........................409 igmp proxy grouplist........................410 igmp proxy ifconfig...........................411 igmp proxy iflist..........................
Page 16 Contents ip iflist..............................440 ip ifwait...............................441 ip ipadd.............................. 442 ip ipconfig............................443 ip ipdelete............................444 ip iplist..............................445 ip mcast flush............................ 446 ip mcast rtadd........................... 447 ip mcast rtdelete..........................448 ip mcast rtlist.............................449 ip rtadd............................... 450 ip rtdelete............................451 ip rtlist..............................452 ipqos Commands..................
Page 17 Contents label rule flush...........................475 label rule list............................476 label rule modify..........................477 language Commands.................479 language config..........................480 language delete..........................481 language list............................482 mbus Commands..................483 mbus client authenticate........................484 mbus client config..........................485 mbus client exec..........................486 mbus client register.......................... 488 mbus client termsession........................
Page 18 Contents menu Command..................513 mlp Commands..................515 mlp debug export..........................516 mlp debug stats..........................517 mlp debug traceconfig........................518 mlp flush............................519 mlp import............................520 mlp privilege add..........................521 mlp privilege addzone........................522 mlp privilege config.......................... 523 mlp privilege delete.......................... 524 mlp privilege list..........................525 mlp privilege removezone........................526 mlp role add............................
Page 19 Contents ppp flush............................550 ppp ifadd............................551 ppp ifattach............................552 ppp ifconfig............................553 ppp ifdelete............................556 ppp ifdetach............................557 ppp iflist............................. 558 ppp ifscan............................559 ppp relay flush..........................560 ppp relay ifadd..........................561 ppp relay ifconfig..........................562 ppp relay ifdelete..........................563 ppp relay iflist............................564 ppp relay sesslist..........................
Page 20 Contents script run............................588 service Commands..................589 service host add..........................590 service host assign..........................591 service host delete..........................592 service host disable.......................... 593 service host flush..........................594 service host list..........................595 service host rule add........................596 service host rule delete........................598 service host stats..........................
Page 21 Contents sntp Commands..................627 sntp add............................. 628 sntp config............................629 sntp debug traceconfig........................630 sntp delete............................631 sntp flush............................632 sntp list...............................633 software Commands................. 635 software download........................... 636 software upgrade..........................637 software version..........................638 system Commands..................639 system config............................ 640 system debug autosave........................641 system debug stats...........................
Page 22 Contents tls https-server cert delete....................... 663 tls https-server cert list........................664 tls https-server config........................665 tls self cert list........................... 666 traceroute Command................667 upgrade Commands.................. 669 upgrade config..........................670 upgrade debug sesslist........................671 upgrade debug traceconfig......................672 upgrade profile add.......................... 673 upgrade profile delete........................674 upgrade profile list..........................675 upgrade profile modify........................676 upgrade start.............................
Page 23 Contents wireless macacl flush........................699 wireless macacl list........................... 700 wireless macacl modify........................701 wireless macacl register........................702 wireless mssid ifadd......................... 703 wireless mssid ifattach........................704 wireless mssid ifconfig........................705 wireless mssid ifdelete........................706 wireless mssid ifdetach........................707 wireless mssid iflist...........................708 wireless multiuni add........................709 wireless multiuni delete........................
Page 24 Contents xdsl debug traceconfig........................736 xdsl info..............................737 xdsl version............................738 E-DOC-CTC-20071119-0014 v1.0...
Page 25: Command
? Command ? Command Displays this help information E-DOC-CTC-20071119-0014 v1.0...
Page 26 .. Command E-DOC-CTC-20071119-0014 v1.0...
Page 27: Command
.. Command .. Command Exits group selection. E-DOC-CTC-20071119-0014 v1.0...
Page 28: Atm Commands
atm Commands E-DOC-CTC-20071119-0014 v1.0...
Page 29: Atm Commands
atm Commands atm Commands atm cac config Configure ATM connection admission see page 31 control. atm cac list List all CAC parameters. see page 32 atm cac overbooking Configure ATM overbooking see page 33 parameters. atm debug aal5stats Display AAL5 port specific atm see page 34 statistics.
Page 30 atm Commands atm phonebook delete Delete a phonebook entry. see page 56 atm phonebook flush Flush all phonebook entries. see page 57 atm phonebook list Display the phonebook. see page 58 atm qosbook add Add a new qosbook entry. see page 59 atm qosbook config Modify the qosbook configuration.
Page 31: Atm Cac Config
atm Commands atm cac config Configure ATM connection admission control. SYNTAX: atm cac config port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> state = <{disabled|enabled}> where: port The port for which CAC is configured. REQUIRED state Enable/disable CAC for an ATM port. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 32: Atm Cac List
atm Commands atm cac list List all CAC parameters. E-DOC-CTC-20071119-0014 v1.0...
Page 33: Atm Cac Overbooking
atm Commands atm cac overbooking Configure ATM overbooking parameters. SYNTAX: atm cac overbooking [rt = <number{0-1000}]> [nrt = <number{0-1000}]> where: The realtime overbooking percentage. OPTIONAL The non-realtime overbooking percentage. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 34: Atm Debug Aal5Stats
atm Commands atm debug aal5stats Display AAL5 port specific atm statistics. SYNTAX: atm debug aal5stats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> [clear = <{disabled|enabled}]> where: port The port number for which statistics will be REQUIRED retrieved.
Page 35: Atm Debug Gstats
atm Commands atm debug gstats Display ATM global statistics. SYNTAX: atm debug gstats [clear = <{disabled|enabled}]> where: clear Clear the statistics after request. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 36: Atm Debug Portstats
atm Commands atm debug portstats Display port specific atm statistics. SYNTAX: atm debug portstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> [clear = <{disabled|enabled}]> where: port The port for which statistics will be retrieved. REQUIRED clear Clear the statistics after the request. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 37: Atm Flush
atm Commands atm flush Flush all ATM interfaces. E-DOC-CTC-20071119-0014 v1.0...
Page 38: Atm Ifadd
atm Commands atm ifadd Create a new ATM interface. SYNTAX: atm ifadd intf = <string> where: intf The name for the new ATM interface. If not REQUIRED specified, the destination will double as interface name. E-DOC-CTC-20071119-0014 v1.0...
Page 39: Atm Ifattach
atm Commands atm ifattach Attach an ATM interface. SYNTAX: atm ifattach intf = <{}> where: intf The name of the ATM interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 40: Atm Ifconfig
atm Commands atm ifconfig Modify an ATM interface. SYNTAX: atm ifconfig intf = <{atm_Internet}> [dest = <{}]> [qos = <{default}]> [clp = <{0|1|classification}]> [clpthresh = <number{0-15}]> [encaps = <{llc|vcmux}]> [fcs = <{disabled|enabled|auto}]> [ulp = <{mac|ip|ppp}]> [retry = <number{0-65535}]> where: intf The name of the ATM interface to configure.
Page 41: Atm Ifdelete
atm Commands atm ifdelete Delete an ATM interface. SYNTAX: atm ifdelete intf = <{}> where: intf The name of the ATM interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 42: Atm Ifdetach
atm Commands atm ifdetach Detach an ATM interface. SYNTAX: atm ifdetach intf = <{}> where: intf The name of the ATM interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 43: Atm Iflist
atm Commands atm iflist Display the ATM interfaces. SYNTAX: atm iflist [intf = <{atm_Internet}]> where: intf The name of an ATM interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 44: Atm Oam Cc List
atm Commands atm oam cc list Display CC configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 45: Atm Oam Cc Modify
atm Commands atm oam cc modify Modify CC on the connection. SYNTAX: atm oam cc modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> [transmit = <{disabled|enabled}]> [receive = <{disabled|enabled}]> [auto = <{disabled|enabled}]> [span = <{segment|end2end}]> where: port The ATM port number.
Page 46: Atm Oam Cc Send
atm Commands atm oam cc send Send CC activate/deactivate to connection. SYNTAX: atm oam cc send port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> [span = <{segment|end2end}]> [action = <{activate|deactivate}]> [direction = <{source|sink|both}]> where: port The ATM port number. REQUIRED The Virtual Path Identifier.
Page 47: Atm Oam Config
atm Commands atm oam config Modify the ATM OAM settings. SYNTAX: atm oam config [clp = <number{0-1}]> [loopbackid = <string]> where: The CLP bit value of the OAM cells. OPTIONAL loopbackid The loopback id (hexadecimal string) for OPTIONAL processing of segment loopback cells. E-DOC-CTC-20071119-0014 v1.0...
Page 48: Atm Oam List
atm Commands atm oam list Display the ATM OAM settings. E-DOC-CTC-20071119-0014 v1.0...
Page 49: Atm Oam Modify
atm Commands atm oam modify Modify the ATM OAM data blocking mode. SYNTAX: atm oam modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> blocking = <{disabled|enabled}> where: port The port for which OAM blocking is configured. REQUIRED blocking Enable/disable OAM blocking. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 50: Atm Oam Ping
atm Commands atm oam ping Send ATM loopback cells. SYNTAX: atm oam ping dest = <{atm_pvc_8_35}> [count = <number{1-1000000}]> [interval = <number{100-1000000}]> where: dest The destination address for the request. REQUIRED count The number of pings to send. OPTIONAL interval The interval in milliseconds between packets.
Page 51: Atm Oam Vclb Add
atm Commands atm oam vclb add Create a loopback connection for VC SYNTAX: atm oam vclb add port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> where: port The ATM port number. REQUIRED The Virtual Path Identifier. REQUIRED The Virtual Channel Identifier.
Page 52: Atm Oam Vclb Del
atm Commands atm oam vclb del Delete a loopback connection for VC SYNTAX: atm oam vclb del port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> where: port The ATM port number. REQUIRED The Virtual Path Identifier. REQUIRED The Virtual Channel Identifier.
Page 53: Atm Oam Vclb List
atm Commands atm oam vclb list List all VC loopback connections E-DOC-CTC-20071119-0014 v1.0...
Page 54: Atm Phonebook Add
atm Commands atm phonebook add Add a new phonebook entry. SYNTAX: atm phonebook add name = <string> addr = <atmchannel : PVC syntax is [port.]vpi.vci port=dsl0|dsl1|...> where: name The phonebook name for this destination. REQUIRED addr The address for this destination. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 55: Atm Phonebook Autolist
atm Commands atm phonebook autolist Display auto PVC's. E-DOC-CTC-20071119-0014 v1.0...
Page 56: Atm Phonebook Delete
atm Commands atm phonebook delete Delete a phonebook entry. SYNTAX: atm phonebook delete name = <{}> where: name The name of the entry to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 57: Atm Phonebook Flush
atm Commands atm phonebook flush Flush all phonebook entries. E-DOC-CTC-20071119-0014 v1.0...
Page 58: Atm Phonebook List
atm Commands atm phonebook list Display the phonebook. E-DOC-CTC-20071119-0014 v1.0...
Page 59: Atm Qosbook Add
atm Commands atm qosbook add Add a new qosbook entry. SYNTAX: atm qosbook add name = <string> [txctd = <{default}]> [rxctd = <{default}]> where: name The name for the new QoS entry. REQUIRED txctd The name of the CTD for transmit (upstream) OPTIONAL direction.
Page 60: Atm Qosbook Config
atm Commands atm qosbook config Modify the qosbook configuration. SYNTAX: atm qosbook config [format = <{bytes|cells}]> where: format The input, output format of the qosbook. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 61: Atm Qosbook Ctdadd
atm Commands atm qosbook ctdadd Add a new connection traffic descriptor. SYNTAX: atm qosbook ctdadd name = <string> conformance = <{UBR|CBR|VBR|UBR.1|UBR.2| UBR.mdcr|CBR.1|VBR.1|VBR.2|VBR.3|VBR.c|VBR.nt| VBR.t|GFR.1|GFR.2}> [peakrate = <number{0-27786}]> [sustrate = <number{0-27786}]> [maxburst = <number{48-12240}]> [minrate = <number{0-27786}]> [maxframe = <number{0-255}]> [celldelay = <number]> [realtime = <{enabled|disabled}]>...
Page 62: Atm Qosbook Ctddelete
atm Commands atm qosbook ctddelete Delete a connection traffic descriptor. SYNTAX: atm qosbook ctddelete name = <{default}> [force = <{disabled|enabled}]> where: name The name of the CTD entry to delete. REQUIRED force Force delete even when the entry is still in use. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 63: Atm Qosbook Ctdlist
atm Commands atm qosbook ctdlist Display all connection traffic descriptors. E-DOC-CTC-20071119-0014 v1.0...
Page 64: Atm Qosbook Delete
atm Commands atm qosbook delete Delete a qosbook entry. SYNTAX: atm qosbook delete name = <{default}> [force = <{disabled|enabled}]> where: name The name of the qosbook entry to delete. REQUIRED force Force delete even when the entry is still in use. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 65: Atm Qosbook Flush
atm Commands atm qosbook flush Flush all qosbook entries. E-DOC-CTC-20071119-0014 v1.0...
Page 66: Atm Qosbook List
atm Commands atm qosbook list Display the qosbook. E-DOC-CTC-20071119-0014 v1.0...
Page 67: Autopvc Commands
autopvc Commands autopvc Commands autopvc config Configure autopvc. see page 68 autopvc list Show retreived information. see page 69 E-DOC-CTC-20071119-0014 v1.0...
Page 68: Autopvc Config
autopvc Commands autopvc config Configure autopvc. SYNTAX: autopvc config [mode = <{pseudo|passive|active}]> [type = <{bridge|pppoerelay|ipoa|ethoa|pppoa| pppoe}]> [overwrite = <{disabled|enabled}]> [peakrate = <number{0-27786}]> where: mode Autopvc mode. OPTIONAL type Type of autopvc. OPTIONAL overwrite Enable/disable UBR peak rate overwrite. OPTIONAL peakrate The UBR peak rate (in kilobits per second) '0' to OPTIONAL indicate linerate.
Page 69: Autopvc List
autopvc Commands autopvc list Show retreived information. SYNTAX: autopvc list [table = <{Port|AtmLayer|Vpc|Vcc|Address| AddressRegistrationAdmin|AAL5Profile| AAL2CommonProfile|AAL2TrunkingProfile| AAL2LESProfile|AtmServiceConnInfoExtension| AtmServiceTypeExtension| AAL5ProfileExtension}]> where: table Autopvc table. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 70 config Commands E-DOC-CTC-20071119-0014 v1.0...
Page 71: Config Commands
config Commands config Commands config delete Delete a user configuration file. see page 72 config dump Show the saved configuration file see page 73 config flush Flush the loaded configuration. see page 74 config list Show the current configuration set see page 75 config load Load saved or default configuration.
Page 72: Config Delete
config Commands config delete Delete a user configuration file. SYNTAX: config delete [filename = <user configuration filename]> where: filename configuration file to erase OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 73: Config Dump
config Commands config dump Show the saved configuration file E-DOC-CTC-20071119-0014 v1.0...
Page 74: Config Flush
config Commands config flush Flush the loaded configuration. SYNTAX: config flush [flush_ip = <{enabled|disabled}]> where: flush_ip Flush IP settings or not. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 75: Config List
config Commands config list Show the current configuration set SYNTAX: config list [templates = <{disabled|enabled}]> where: templates list template files OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 76: Config Load
config Commands config load Load saved or default configuration. SYNTAX: config load [load_ip = <{enabled|disabled}]> [defaults = <{disabled|enabled}]> [flush = <{enabled|disabled}]> [echo = <{disabled|enabled}]> [filename = <string]> where: load_ip Load IP settings or not. OPTIONAL defaults Load default instead of saved configuration. OPTIONAL flush Flush current configuration before loading new...
Page 77: Config Save
config Commands config save Store current configuration to backup file SYNTAX: config save filename = <user configuration filename> where: filename Filename for backupfile of current configuration REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 78: Connection Commands
connection Commands E-DOC-CTC-20071119-0014 v1.0...
Page 79: Connection Commands
connection Commands connection Commands connection appconfig Modify a CONN/NAT application see page 80 helper configuration connection appinfo Display CONN/NAT application see page 81 specific info connection applist Display the available CONN/NAT see page 82 application helpers. connection bind Create a CONN/NAT application see page 83 helper/port binding.
Page 80: Connection Appconfig
connection Commands connection appconfig Modify a CONN/NAT application helper configuration SYNTAX: connection appconfig application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> [trace = <{disabled|enabled}]> [timeout = <number{0-32000}]> [childqos = <{DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [floating = <{disabled|enabled}]> [proxy = <{disabled|enabled}]> [tracelevel = <number{1-4}]> [SIP_ALG = <{disabled|enabled}]> [RTP_predict_for_term_SIP_ALG = <{disabled| enabled}]>...
Page 81: Connection Appinfo
connection Commands connection appinfo Display CONN/NAT application specific info SYNTAX: connection appinfo application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> where: application The name of a CONN/NAT application helper as REQUIRED listed by ':connection applist'. E-DOC-CTC-20071119-0014 v1.0...
Page 82: Connection Applist
connection Commands connection applist Display the available CONN/NAT application helpers. E-DOC-CTC-20071119-0014 v1.0...
Page 83: Connection Bind
connection Commands connection bind Create a CONN/NAT application helper/port binding. SYNTAX: connection bind application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> port = <port-range> where: application The name of a CONN/NAT application helper as REQUIRED listed by ':connection applist'. port The port number or range this application REQUIRED handler should work on.
Page 84: Connection Bindlist
connection Commands connection bindlist Display the CONN/NAT application helper/port bindings. E-DOC-CTC-20071119-0014 v1.0...
Page 85: Connection Clean
connection Commands connection clean Clean connection database by forcing timeouts. SYNTAX: connection clean [level = <number{0-9}]> where: level Scrubbing level. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 86: Connection Clear
connection Commands connection clear Kill all connections. E-DOC-CTC-20071119-0014 v1.0...
Page 87: Connection Config
connection Commands connection config Modify global connection configuration. SYNTAX: connection config [configchangemode = <{immediate|delayed}]> [probes = <{disabled|enabled}]> [udptrackmode = <{strict|loose}]> where: configchangemode Select how config changes are handled. OPTIONAL probes Enable/disable alive probes on idle connections. OPTIONAL udptrackmode UDP connection tracking mode. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 88: Connection Debug
connection Commands connection debug Connection debug commands. SYNTAX: connection debug [trace = <{disabled|enabled}]> where: trace Enable/disable traces. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 89: Connection Describe
connection Commands connection describe Describe the streams of a connection. SYNTAX: connection describe [id = <number{0-2048}]> where: The connection ID to describe. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 90: Connection Flush
connection Commands connection flush Flush the connection configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 91: Connection Info
connection Commands connection info Display all modules with some info. E-DOC-CTC-20071119-0014 v1.0...
Page 92: Connection List
connection Commands connection list Display the currently known connections. SYNTAX: connection list [nr = <number{1-2048}]> [history = <{disabled|enabled}]> where: The number of connections to display. OPTIONAL history If enabled, show history. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 93: Connection Refresh
connection Commands connection refresh Invalidate all cached decisions. E-DOC-CTC-20071119-0014 v1.0...
Page 94: Connection Stats
connection Commands connection stats Display connection and stream statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 95: Connection Timerclear
connection Commands connection timerclear Clear connection timeout to default. SYNTAX: connection timerclear [timer = <{tcpidle|tcpneg|tcpkill|udpidle| udpkill|icmpkill|ipidle|ipkill|aiprefresh}]> where: timer The name of the connection idle timer. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 96: Connection Timerconfig
connection Commands connection timerconfig Modify connection timeout handling. SYNTAX: connection timerconfig [timer = <{tcpidle|tcpneg|tcpkill|udpidle| udpkill|icmpkill|ipidle|ipkill|aiprefresh}]> [value = <number{0-86400}]> where: timer The name of the connection idle timer. OPTIONAL value The timer expire value in seconds. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 97: Connection Unbind
connection Commands connection unbind Delete a CONN/NAT application helper/port binding. SYNTAX: connection unbind application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> port = <port-range> where: application The name of a CONN/NAT application helper as REQUIRED listed by ':connection applist'. port The port number or range this application REQUIRED handler should work on.
Page 98 cwmp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 99: Cwmp Commands
cwmp Commands cwmp Commands cwmp config Configure the cwmpd as seen from see page 100 the ACS. cwmp debug traceconfig Enable or disable tracing. see page 102 cwmp server config Configure the cwmpd towards the see page 103 ACS. E-DOC-CTC-20071119-0014 v1.0...
Page 100: Cwmp Config
cwmp Commands cwmp config Configure the cwmpd as seen from the ACS. SYNTAX: cwmp config [state = <{disabled|enabled}]> [mode = <{read-only|full}]> [periodicInform = <{disabled|enabled}]> [periodicInfInt = <number]> [sessionTimeout = <number]> [noIpTimeout = <number]> [maxEnvelopes = <number]> [connectionRequest = <{disabled|enabled}]> [connectionReqPath = <string]> [connectionReqUserName = <quoted string]>...
Page 101 cwmp Commands connectionReqAuth Set the authentication type of modem CWMP OPTIONAL server for asynchronous connects. qos-class Set the quality of service class for outgoing OPTIONAL CWMP data. bootdelayrange Set the delay on boot before inform is sent. OPTIONAL upgradedelay Set whether to delay upgrade if services are OPTIONAL active.
Page 102: Cwmp Debug Traceconfig
cwmp Commands cwmp debug traceconfig Enable or disable tracing. SYNTAX: cwmp debug traceconfig [level = <number]> where: level Set the tracelevel (0-1) OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 103: Cwmp Server Config
cwmp Commands cwmp server config Configure the cwmpd towards the ACS. SYNTAX: cwmp server config [url = <string]> [username = <string]> [password = <password]> where: Set the HTTP URL used to contact the ACS OPTIONAL server. username Set the username for ACS Digest Authentication. OPTIONAL password Set the password for ACS Digest Authentication.
Page 104 debug Command E-DOC-CTC-20071119-0014 v1.0...
Page 105: Debug Command
debug Command debug Command Execute a 'Trace & Debug' command. For qualified personnel only. SYNTAX: debug exec cmd = <quoted string> where: Quoted 'Trace & Debug' command string REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 106 dhcp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 107: Dhcp Commands
dhcp Commands dhcp Commands dhcp client debug clear Clear DHCP client statistics see page 111 dhcp client debug stats Print DHCP client statistics see page 112 dhcp client debug traceconfig Modify DHCP client trace see page 113 configuration dhcp client flush Delete all DHCP clients.
Page 108 dhcp Commands dhcp relay delete Delete an entry from the DHCP see page 134 forward list. dhcp relay flush Flushes the DHCP relay settings. see page 135 dhcp relay ifconfig Configure a relay interface. see page 136 dhcp relay iflist Show the configuration of the relay see page 137 interfaces.
Page 109 dhcp Commands dhcp server option instlist List all DHCP server option instances see page 159 dhcp server option ruleadd Add a selection rule to a DHCP server see page 160 option instance dhcp server option ruledelete Delete a selection rule from a DHCP see page 161 server option instance dhcp server option tmpladd...
Page 110 dhcp Commands dhcp spoofing list List the available Spoofing- see page 185 Associations dhcp spoofing option-add Add a DHCP Option Code to a see page 186 Spoofing-Association. dhcp spoofing option-delete Delete a DHCP Option Code from a see page 187 Spoofing-Association.
Page 111: Dhcp Client Debug Clear
dhcp Commands dhcp client debug clear Clear DHCP client statistics E-DOC-CTC-20071119-0014 v1.0...
Page 112: Dhcp Client Debug Stats
dhcp Commands dhcp client debug stats Print DHCP client statistics E-DOC-CTC-20071119-0014 v1.0...
Page 113: Dhcp Client Debug Traceconfig
dhcp Commands dhcp client debug traceconfig Modify DHCP client trace configuration SYNTAX: dhcp client debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 114: Dhcp Client Flush
dhcp Commands dhcp client flush Delete all DHCP clients. E-DOC-CTC-20071119-0014 v1.0...
Page 115: Dhcp Client Ifadd
dhcp Commands dhcp client ifadd Create a DHCP client. SYNTAX: dhcp client ifadd intf = <{Internet|LocalNetwork}> where: intf The name of the interface on which a DHCP REQUIRED Client is defined. E-DOC-CTC-20071119-0014 v1.0...
Page 116: Dhcp Client Ifattach
dhcp Commands dhcp client ifattach Activate a DHCP client. SYNTAX: dhcp client ifattach intf = <> where: intf The name of the interface on which a DHCP REQUIRED Client is defined. E-DOC-CTC-20071119-0014 v1.0...
Page 117: Dhcp Client Ifconfig
dhcp Commands dhcp client ifconfig Configure a DHCP client. SYNTAX: dhcp client ifconfig intf = <> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [metric = <number{0-255}]> [dnsmetric = <number{0-100}]> [broadcast = <{disabled|enabled}]> [serverroute = <{disabled|enabled}]> [followlabel = <{disabled|enabled}]> where: intf The name of the dynamic interface to be REQUIRED configured.
Page 118: Dhcp Client Ifdelete
dhcp Commands dhcp client ifdelete Delete a DHCP client. SYNTAX: dhcp client ifdelete intf = <> where: intf The name of the interface on which a DHCP REQUIRED Client is defined. E-DOC-CTC-20071119-0014 v1.0...
Page 119: Dhcp Client Ifdetach
dhcp Commands dhcp client ifdetach De-activate a DHCP client and releases its lease. SYNTAX: dhcp client ifdetach intf = <> where: intf The name of the interface on which a DHCP REQUIRED Client is defined. E-DOC-CTC-20071119-0014 v1.0...
Page 120: Dhcp Client Iflist
dhcp Commands dhcp client iflist List DHCP clients. SYNTAX: dhcp client iflist [intf = <]> [expand = <{disabled|enabled}]> where: intf The name of the interface on which a DHCP OPTIONAL Client is defined. expand Expand enabled/disabled. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 121: Dhcp Client Ifrenew
dhcp Commands dhcp client ifrenew Renew a DHCP lease. SYNTAX: dhcp client ifrenew intf = <> where: intf The name of the interface on which a DHCP REQUIRED Client is defined. E-DOC-CTC-20071119-0014 v1.0...
Page 122: Dhcp Client Rqoptions Add
dhcp Commands dhcp client rqoptions add Add a DHCP Option Code to the Parameter Request List. SYNTAX: dhcp client rqoptions add intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|domain-name| swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy- filter|max-dgram-reassembly|default-ip-ttl| path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast- address|perform-mask-discovery|...} or number> [index = <number{0-255}]> where: intf The name of the interface on which a DHCP...
Page 123: Dhcp Client Rqoptions Delete
dhcp Commands dhcp client rqoptions delete Delete a DHCP Option Code from the Parameter Request List. SYNTAX: dhcp client rqoptions delete intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|domain-name| swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy- filter|max-dgram-reassembly|default-ip-ttl| path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast- address|perform-mask-discovery|...} or number> where: intf The name of the interface on which a DHCP REQUIRED Client is defined.
Page 124: Dhcp Client Rqoptions List
dhcp Commands dhcp client rqoptions list List all DHCP Option Codes in the Parameter Request List. SYNTAX: dhcp client rqoptions list [intf = <]> where: intf The name of the interface on which a DHCP OPTIONAL Client is defined. E-DOC-CTC-20071119-0014 v1.0...
Page 125: Dhcp Client Rqoptions Optionlist
dhcp Commands dhcp client rqoptions optionlist List all DHCP Option Codes that can be used in the Parameter Request List. E-DOC-CTC-20071119-0014 v1.0...
Page 126: Dhcp Client Txoptions Add
dhcp Commands dhcp client txoptions add Add an option. SYNTAX: dhcp client txoptions add intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|domain-name| swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy- filter|max-dgram-reassembly|default-ip-ttl| path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast- address|perform-mask-discovery|...} or number> [enterprise = <number{1-2147483647}]> [suboption = <number{1-254}]> value = <Value : (type)value; type being 8- bit, 16-bit, 32-bit, addr, >...
Page 127: Dhcp Client Txoptions Delete
dhcp Commands dhcp client txoptions delete Delete an option. SYNTAX: dhcp client txoptions delete intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|domain-name| swap-server|root-path|extensions-path|ip- forwarding|non-local-source-routing|policy- filter|max-dgram-reassembly|default-ip-ttl| path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast- address|perform-mask-discovery|...} or number> [enterprise = <number{1--1}]> [suboption = <number{1-254}]> where: intf The name of the interface on which a DHCP REQUIRED Client is defined.
Page 128: Dhcp Client Txoptions List
dhcp Commands dhcp client txoptions list List all options. SYNTAX: dhcp client txoptions list [intf = <]> [expand = <{disabled|enabled}]> where: intf The name of the interface on which a DHCP OPTIONAL Client is defined. expand Expand enabled/disabled. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 129: Dhcp Client Txoptions Optionlist
dhcp Commands dhcp client txoptions optionlist Lists all DHCP Option Codes that can be used. E-DOC-CTC-20071119-0014 v1.0...
Page 130: Dhcp Relay Add
dhcp Commands dhcp relay add Add an entry to the DHCP forward list. SYNTAX: dhcp relay add name = <string> where: name The forward entry name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 131: Dhcp Relay Config
dhcp Commands dhcp relay config Sets the relay configuration settings. SYNTAX: dhcp relay config [agentinfo = <{disabled|enabled}]> [agentmismatch = <{disabled|enabled}]> where: agentinfo Set the relay agent info status (RFC3046). OPTIONAL agentmismatch Forward/Drop DHCP reply packet when a relay OPTIONAL agent info mismatch is detected (RFC3046). E-DOC-CTC-20071119-0014 v1.0...
Page 132: Dhcp Relay Debug Stats
dhcp Commands dhcp relay debug stats Print DHCP relay statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 133: Dhcp Relay Debug Traceconfig
dhcp Commands dhcp relay debug traceconfig Modify DHCP relay trace configuration SYNTAX: dhcp relay debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 134: Dhcp Relay Delete
dhcp Commands dhcp relay delete Delete an entry from the DHCP forward list. SYNTAX: dhcp relay delete name = <{LocalNetwork_to_127.0.0.1}> where: name The forward entry name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 135: Dhcp Relay Flush
dhcp Commands dhcp relay flush Flushes the DHCP relay settings. E-DOC-CTC-20071119-0014 v1.0...
Page 136: Dhcp Relay Ifconfig
dhcp Commands dhcp relay ifconfig Configure a relay interface. SYNTAX: dhcp relay ifconfig intf = <{LocalNetwork|Internet}> [relay = <{disabled|enabled}]> [maxhops = <number{0-16}]> [remoteid = <password]> [trusted = <{disabled|enabled}]> where: intf The name of the relay interface to configure. REQUIRED relay Set the relay status.
Page 137: Dhcp Relay Iflist
dhcp Commands dhcp relay iflist Show the configuration of the relay interfaces. SYNTAX: dhcp relay iflist [intf = <{LocalNetwork|Internet}]> where: intf The name of the relay interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 138: Dhcp Relay List
dhcp Commands dhcp relay list List the DHCP forward list. SYNTAX: dhcp relay list [name = <{LocalNetwork_to_127.0.0.1}]> where: name The forward entry name. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 139: Dhcp Relay Modify
dhcp Commands dhcp relay modify Modify an entry from the DHCP forward list. SYNTAX: dhcp relay modify name = <{LocalNetwork_to_127.0.0.1}> [addr = <ip-address]> [intf = <{None|LocalNetwork|Internet}]> [giaddr = <ip-address]> [script = <]> where: name The forward entry name. REQUIRED addr The DHCP server IP address.
Page 140: Dhcp Relay Ruleadd
dhcp Commands dhcp relay ruleadd Add a selection rule to a DHCP forward entry SYNTAX: dhcp relay ruleadd name = <{LocalNetwork_to_127.0.0.1}> [key = <{or|and}]> rulename = <> where: name The name of the forward entry. REQUIRED The logical key of the selection rule. OPTIONAL rulename The name of the DHCP selection rule.
Page 141: Dhcp Relay Ruledelete
dhcp Commands dhcp relay ruledelete Delete a selection rule from a DHCP forward entry SYNTAX: dhcp relay ruledelete name = <{LocalNetwork_to_127.0.0.1}> rulename = <> where: name The name of the forward entry. REQUIRED rulename The name of the DHCP selection rule. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 142: Dhcp Rule Add
dhcp Commands dhcp rule add Add a rule for DHCP conditional selection SYNTAX: dhcp rule add name = <string> type = <{option|mac|vci|uci}> option [!] = <{subnet-mask|time-offset| default-routers|time-servers|ien116-servers| impress-servers|resource-location-servers| host-name|boot-file-size|merit-dump|domain- name|swap-server|root-path|extensions-path| ip-forwarding|non-local-source-routing|policy- filter|max-dgram-reassembly|default-ip-ttl| path-mtu-aging-timeout|path-mtu-plateau-table| interface-mtu|all-subnets-local|broadcast- address|perform-mask-discovery|...} or number> [enterprise = <number{1-2147483647}]> [suboption = <number{1-254}]>...
Page 143: Dhcp Rule Debug Traceconfig
dhcp Commands dhcp rule debug traceconfig Modify DHCP rule trace configuration SYNTAX: dhcp rule debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 144: Dhcp Rule Delete
dhcp Commands dhcp rule delete Delete a DHCP rule SYNTAX: dhcp rule delete name = <> where: name The name of the DHCP rule. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 145: Dhcp Rule Flush
dhcp Commands dhcp rule flush Flush all DHCP rules E-DOC-CTC-20071119-0014 v1.0...
Page 146: Dhcp Rule List
dhcp Commands dhcp rule list List all DHCP rules E-DOC-CTC-20071119-0014 v1.0...
Page 147: Dhcp Server Config
dhcp Commands dhcp server config Print DHCP server configuration settings SYNTAX: dhcp server config [state = <{disabled|enabled}]> where: state Enable/Disable the DHCP server. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 148: Dhcp Server Debug Clear
dhcp Commands dhcp server debug clear Clear DHCP server statistics E-DOC-CTC-20071119-0014 v1.0...
Page 149: Dhcp Server Debug Stats
dhcp Commands dhcp server debug stats Print DHCP server statistics E-DOC-CTC-20071119-0014 v1.0...
Page 150: Dhcp Server Debug Traceconfig
dhcp Commands dhcp server debug traceconfig Modify DHCP server trace configuration SYNTAX: dhcp server debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 151: Dhcp Server Flush
dhcp Commands dhcp server flush Flush all DHCP server pool and lease entries E-DOC-CTC-20071119-0014 v1.0...
Page 152: Dhcp Server Lease Add
dhcp Commands dhcp server lease add Add a DHCP server lease SYNTAX: dhcp server lease add clientid = <clientid> pool = <{LAN_private}> [addr = <ip-address]> [offset = <number]> [leasetime = <number]> [expirytime = <number]> [gateway = <ip-address|0|none]> [macaddr = <hardware-address]> where: clientid The DHCP client identification string of the host.
Page 153: Dhcp Server Lease Delete
dhcp Commands dhcp server lease delete Delete a DHCP server lease SYNTAX: dhcp server lease delete [clientid = <clientid]> [index = <number]> [expand = <{disabled|enabled}]> where: clientid The DHCP client identification string. OPTIONAL index The DHCP server lease table index. OPTIONAL expand Expand enabled/disabled.
Page 154: Dhcp Server Lease Flush
dhcp Commands dhcp server lease flush Flush all DHCP server leases SYNTAX: dhcp server lease flush [pool = <{LAN_private}]> where: pool The name of the DHCP server pool. Only the OPTIONAL leases belonging to this pool will be deleted. E-DOC-CTC-20071119-0014 v1.0...
Page 155: Dhcp Server Lease List
dhcp Commands dhcp server lease list List all DHCP server leases SYNTAX: dhcp server lease list [clientid = <clientid]> [index = <number]> [expand = <{disabled|enabled}]> where: clientid The DHCP client identification string. OPTIONAL index The DHCP server lease table index. OPTIONAL expand Expand enabled/disabled.
Page 156: Dhcp Server Option Flush
dhcp Commands dhcp server option flush Flush all DHCP server option templates and instances E-DOC-CTC-20071119-0014 v1.0...
Page 157: Dhcp Server Option Instadd
dhcp Commands dhcp server option instadd Add a DHCP server option instance SYNTAX: dhcp server option instadd name = <string> tmplname = <> [policy = <{requested|always|rules}]> [dynamic = <{disabled|enabled}]> [maxuse = <number{1-255}]> [enterprise = <number{1-2147483647}]> [suboption = <number{1-254}]> value = <Value : (type)value; type being 8- bit, 16-bit, 32-bit, addr, >...
Page 158: Dhcp Server Option Instdelete
dhcp Commands dhcp server option instdelete Delete a DHCP server option instance SYNTAX: dhcp server option instdelete name = <> [enterprise = <number{1--1}]> [suboption = <number{1-254}]> where: name The name of the DHCP server option instance. REQUIRED enterprise The enterprise number (see http://www.iana.org/ OPTIONAL assignments/enterprise- numbers) suboption...
Page 159: Dhcp Server Option Instlist
dhcp Commands dhcp server option instlist List all DHCP server option instances SYNTAX: dhcp server option instlist [name = <]> where: name The name of the DHCP server option instance. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 160: Dhcp Server Option Ruleadd
dhcp Commands dhcp server option ruleadd Add a selection rule to a DHCP server option instance SYNTAX: dhcp server option ruleadd name = <> [key = <{or|and}]> rulename = <> where: name The name of the DHCP server option instance. REQUIRED The logical key of the selection rule.
Page 161: Dhcp Server Option Ruledelete
dhcp Commands dhcp server option ruledelete Delete a selection rule from a DHCP server option instance SYNTAX: dhcp server option ruledelete name = <> rulename = <> where: name The name of the DHCP server option instance. REQUIRED rulename The name of the DHCP selection rule. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 162: Dhcp Server Option Tmpladd
dhcp Commands dhcp server option tmpladd Add a DHCP server option template SYNTAX: dhcp server option tmpladd name = <string> optionid = <number{1-254}> [dynamic = <{disabled|enabled}]> where: name The name of the DHCP server option template. REQUIRED optionid Specify the DHCP server option code. REQUIRED dynamic Enable/Disable option template as dynamic.
Page 163: Dhcp Server Option Tmpldelete
dhcp Commands dhcp server option tmpldelete Delete a DHCP server option template SYNTAX: dhcp server option tmpldelete name = <> where: name The name of the DHCP server option template. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 164: Dhcp Server Option Tmpllist
dhcp Commands dhcp server option tmpllist List all DHCP server option templates E-DOC-CTC-20071119-0014 v1.0...
Page 165: Dhcp Server Policy
dhcp Commands dhcp server policy Print DHCP server policy settings SYNTAX: dhcp server policy [verifyfirst = <{disabled|enabled}]> [trustclient = <{disabled|enabled}]> [rtbehaviour = <{traditional|standard|msft}]> where: verifyfirst Enable/Disable IP address conflict network OPTIONAL probing before handing out an address to a client. trustclient Whether or not the IP address suggested by a OPTIONAL...
Page 166: Dhcp Server Pool Add
dhcp Commands dhcp server pool add Add a DHCP server pool SYNTAX: dhcp server pool add name = <string> [index = <number]> where: name The name of the DHCP server pool. REQUIRED index The number of the pool before which you want OPTIONAL the new pool to be added.
Page 167: Dhcp Server Pool Config
dhcp Commands dhcp server pool config Configure a DHCP server pool SYNTAX: dhcp server pool config name = <{LAN_private}> [state = <{disabled|enabled}]> [intf = <{Internet|LocalNetwork}]> [index = <number]> [poolstart = <ip-address]> [poolend = <ip-address]> [netmask = <ip-mask(dotted or cidr)]> [gateway = <ip-address|0|none]> [server = <ip-address|none]>...
Page 168 dhcp Commands secdns The IP address of the secondary DNS server for OPTIONAL DHCP clients. dnsmetric The DHCP server pool DNS route metric. OPTIONAL primwins The IP address of the primary WINS server for OPTIONAL DHCP clients. secwins The IP address of the secondary WINS server for OPTIONAL DHCP clients.
Page 169: Dhcp Server Pool Delete
dhcp Commands dhcp server pool delete Delete a DHCP server pool SYNTAX: dhcp server pool delete name = <{LAN_private}> where: name The name of the DHCP server pool. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 170: Dhcp Server Pool Flush
dhcp Commands dhcp server pool flush Flush all DHCP server pools E-DOC-CTC-20071119-0014 v1.0...
Page 171: Dhcp Server Pool List
dhcp Commands dhcp server pool list List all DHCP server pools SYNTAX: dhcp server pool list [name = <{LAN_private}]> where: name The name of the DHCP server pool. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 172: Dhcp Server Pool Optadd
dhcp Commands dhcp server pool optadd Add an option instance to the DHCP server pool SYNTAX: dhcp server pool optadd name = <{LAN_private}> instname = <> where: name The name of the DHCP server pool. REQUIRED instname The name of the DHCP server option instance. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 173: Dhcp Server Pool Optdelete
dhcp Commands dhcp server pool optdelete Delete an option instance from the DHCP server pool SYNTAX: dhcp server pool optdelete name = <{LAN_private}> instname = <> where: name The name of the DHCP server pool. REQUIRED instname The name of the DHCP server option instance. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 174: Dhcp Server Pool Rtadd
dhcp Commands dhcp server pool rtadd Add a route to the DHCP server pool SYNTAX: dhcp server pool rtadd name = <{LAN_private}> dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [gateway = <ip-address|0]> where: name The name of the DHCP server pool. REQUIRED The IP destination address of the route for DHCP REQUIRED...
Page 175: Dhcp Server Pool Rtdelete
dhcp Commands dhcp server pool rtdelete Delete a route from the DHCP server pool SYNTAX: dhcp server pool rtdelete name = <{LAN_private}> dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [gateway = <ip-address|0]> where: name The name of the DHCP server pool. REQUIRED The IP destination address of the route for DHCP REQUIRED...
Page 176: Dhcp Server Pool Ruleadd
dhcp Commands dhcp server pool ruleadd Add a selection rule to the DHCP server pool SYNTAX: dhcp server pool ruleadd name = <{LAN_private}> [key = <{or|and}]> rulename = <> where: name The name of the DHCP server pool. REQUIRED The logical key of the selection rule. OPTIONAL rulename The name of the DHCP selection rule.
Page 177: Dhcp Server Pool Ruledelete
dhcp Commands dhcp server pool ruledelete Delete a selection rule from the DHCP server pool SYNTAX: dhcp server pool ruledelete name = <{LAN_private}> rulename = <> where: name The name of the DHCP server pool. REQUIRED rulename The name of the DHCP selection rule. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 178: Dhcp Spoofing Add
dhcp Commands dhcp spoofing add Add a Spoofing-Association SYNTAX: dhcp spoofing add name = <string> pool_name = <{LAN_private}> ifname = <> where: name The name of the Association. REQUIRED pool_name The name of the pool to be associated. REQUIRED ifname The name of the interface on which a DHCP REQUIRED Client is defined.
Page 179: Dhcp Spoofing Attach
dhcp Commands dhcp spoofing attach Enable a Spoofing-Association SYNTAX: dhcp spoofing attach name = <{|||}> where: name The name of the Association. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 180: Dhcp Spoofing Config
dhcp Commands dhcp spoofing config Display/modify dhcp spoofing state SYNTAX: dhcp spoofing config [state = <{enabled|disabled}]> where: state Enable/Disable spoofing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 181: Dhcp Spoofing Debug Traceconfig
dhcp Commands dhcp spoofing debug traceconfig Display/modify DHCP spoofing trace configuratin SYNTAX: dhcp spoofing debug [state = <{disabled|enabled}]> traceconfig where: state Enable/Disable tracing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 182: Dhcp Spoofing Delete
dhcp Commands dhcp spoofing delete Delete a Spoofing-Association SYNTAX: dhcp spoofing delete name = <{|||}> where: name The name of the Association. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 183: Dhcp Spoofing Detach
dhcp Commands dhcp spoofing detach Disable a Spoofing-Association SYNTAX: dhcp spoofing detach name = <{|||}> where: name The name of the Association. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 184: Dhcp Spoofing Flush
dhcp Commands dhcp spoofing flush Flush all the associations and the options. E-DOC-CTC-20071119-0014 v1.0...
Page 185: Dhcp Spoofing List
dhcp Commands dhcp spoofing list List the available Spoofing-Associations SYNTAX: dhcp spoofing list [name = <{|||}]> where: name The name of the Association. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 186: Dhcp Spoofing Option-Add
dhcp Commands dhcp spoofing option-add Add a DHCP Option Code to a Spoofing-Association. SYNTAX: dhcp spoofing option-add name = <{|||}> option = <number> where: name The name of the Association. REQUIRED option The option id. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 187: Dhcp Spoofing Option-Delete
dhcp Commands dhcp spoofing option-delete Delete a DHCP Option Code from a Spoofing-Association. SYNTAX: dhcp spoofing option-delete name = <{|||}> option = <number> where: name The name of the Association. REQUIRED option The option id. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 188 dns Commands E-DOC-CTC-20071119-0014 v1.0...
Page 189: Dns Commands
dns Commands dns Commands dns client config Modify the DNS resolver see page 190 configuration. dns client dnsadd Add a DNS server. see page 191 dns client dnsdelete Delete a DNS server. see page 192 dns client dnslist List all DNS servers. see page 193 dns client flush Remove all DNS servers.
Page 190: Dns Client Config
dns Commands dns client config Modify the DNS resolver configuration. SYNTAX: dns client config [timeout = <number{1-900}]> [retry = <number{0-10}]> [search = <{disabled|enabled}]> [list = <string]> [trace = <{disabled|enabled}]> where: timeout The query timeout in seconds. OPTIONAL retry The number of query retries before giving up. OPTIONAL search Use the searchlist to construct fully qualified...
Page 191: Dns Client Dnsadd
dns Commands dns client dnsadd Add a DNS server. SYNTAX: dns client dnsadd addr = <string> [port = <number]> where: addr The DNS server IP address. REQUIRED port The DNS server port number. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 192: Dns Client Dnsdelete
dns Commands dns client dnsdelete Delete a DNS server. SYNTAX: dns client dnsdelete index = <number{1-99}> where: index The index number (shown by the 'list' REQUIRED command) of the server to delete. E-DOC-CTC-20071119-0014 v1.0...
Page 193: Dns Client Dnslist
dns Commands dns client dnslist List all DNS servers. E-DOC-CTC-20071119-0014 v1.0...
Page 194: Dns Client Flush
dns Commands dns client flush Remove all DNS servers. E-DOC-CTC-20071119-0014 v1.0...
Page 195: Dns Client Nslookup
dns Commands dns client nslookup DNS lookup for a domain name or an address. SYNTAX: dns client nslookup host = <string> where: host The DNS domain name string to query. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 196: Dns Server Config
dns Commands dns server config DNS server configuration settings SYNTAX: dns server config [domain = <string]> [timeout = <number{0-2147483647}]> [suppress = <number]> [state = <{disabled|enabled}]> [trace = <{disabled|enabled}]> [syslog = <{disabled|enabled}]> [WANDownSpoofing = <{disabled|enabled}]> [WDSpoofedIP = <ip-address]> where: domain The DNS server domain name. OPTIONAL timeout The forwarded DNS query timeout.
Page 197: Dns Server Debug Clear
dns Commands dns server debug clear Clear the DNS server/forwarder statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 198: Dns Server Debug Spoof Clear
dns Commands dns server debug spoof clear Clear the intercept cache table E-DOC-CTC-20071119-0014 v1.0...
Page 199: Dns Server Debug Spoof Getaddress
dns Commands dns server debug spoof getaddress Get the real ip for the given spoofed ip SYNTAX: dns server debug spoof addr = <ip-address> getaddress where: addr The spoofed ip to look up. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 200: Dns Server Debug Spoof Getflags
dns Commands dns server debug spoof getflags Get the error flags for the given spoofed ip SYNTAX: dns server debug spoof addr = <ip-address> getflags where: addr The spoofed ip to look up. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 201: Dns Server Debug Spoof List
dns Commands dns server debug spoof list List the intercept cache table. E-DOC-CTC-20071119-0014 v1.0...
Page 202: Dns Server Debug Spoof Update
dns Commands dns server debug spoof update update the intercept cache table E-DOC-CTC-20071119-0014 v1.0...
Page 203: Dns Server Debug Stats
dns Commands dns server debug stats Print the DNS server/forwarder statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 204: Dns Server Flush
dns Commands dns server flush Flush all local DNS hosts and routes. E-DOC-CTC-20071119-0014 v1.0...
Page 205: Dns Server Host Add
dns Commands dns server host add Add a local DNS host SYNTAX: dns server host add name = <string> [addr = <ip-address]> [ttl = <number{0-2147483647}]> where: name The name of an IP host to add. REQUIRED addr The IP address of the host. OPTIONAL The lifetime of the host.
Page 206: Dns Server Host Delete
dns Commands dns server host delete Delete a local DNS host SYNTAX: dns server host delete name = <string> where: name The name of an IP host to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 207: Dns Server Host Flush
dns Commands dns server host flush Flush all local DNS hosts E-DOC-CTC-20071119-0014 v1.0...
Page 208: Dns Server Host List
dns Commands dns server host list List all local DNS hosts E-DOC-CTC-20071119-0014 v1.0...
Page 209: Dns Server Route Add
dns Commands dns server route add Creates a DNS forwarding entry or template SYNTAX: dns server route add dns = <ip-address> [src = <ip-address]> [srcmask = <ip-mask(dotted or cidr)]> [domain = <string]> [metric = <number{0-100}]> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [intf = <{loop|Internet|LocalNetwork}]> where: The IP address of a DNS server.
Page 210: Dns Server Route Delete
dns Commands dns server route delete Deletes a DNS forwarding entry or template SYNTAX: dns server route delete dns = <ip-address> [domain = <string]> [intf = <{loop|Internet|LocalNetwork}]> where: The IP address of a DNS server. REQUIRED domain The DNS domain string. OPTIONAL intf The interface associated with the DNS entry or...
Page 211: Dns Server Route Flush
dns Commands dns server route flush Removes all DNS forwarding entries and templates E-DOC-CTC-20071119-0014 v1.0...
Page 212: Dns Server Route List
dns Commands dns server route list Lists all DNS forwarding entries and templates E-DOC-CTC-20071119-0014 v1.0...
Page 213: Dsd Commands
dsd Commands dsd Commands dsd config Display/modify DSD framework see page 214 configuration dsd debug config Display/modify DSD debug settings see page 215 dsd debug connection list Display internal connection pool see page 216 usage dsd debug proxy Display/modify HTTPI fixed proxy see page 217 settings dsd debug recycling...
Page 214: Dsd Config
dsd Commands dsd config Display/modify DSD framework configuration SYNTAX: dsd config [state = <{disabled|enabled|automatic}]> where: state DSD framework operation mode OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 215: Dsd Debug Config
dsd Commands dsd debug config Display/modify DSD debug settings SYNTAX: dsd debug config [turbomode = <{disabled|enabled}]> where: turbomode Enable/disable turbomode OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 216: Dsd Debug Connection List
dsd Commands dsd debug connection list Display internal connection pool usage SYNTAX: dsd debug connection list [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 217: Dsd Debug Proxy
dsd Commands dsd debug proxy Display/modify HTTPI fixed proxy settings SYNTAX: dsd debug proxy [state = <{disabled|enabled}]> [dest = <ip-address]> [port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|...} or number]> where: state Enable/disable fixed proxy redirecting OPTIONAL dest Destination IP where requests will be forwarded...
Page 218: Dsd Debug Recycling
dsd Commands dsd debug recycling Display/modify HTTPI recycling settings SYNTAX: dsd debug recycling [state = <{disabled|enabled}]> [interval = <number]> [httpidle = <number]> [otheridle = <number]> where: state Enable/disable stream recycling OPTIONAL interval Time between successive activity checks OPTIONAL httpidle Minimal idle count for recycling (filtered) http OPTIONAL streams otheridle...
Page 219: Dsd Debug Stats
dsd Commands dsd debug stats Display/clear DSD framework and module statistics SYNTAX: dsd debug stats [name = <{intercept|urlfilter|recycling| syslog|all}]> [clear = <{no|yes}]> where: name Specify the name of a module OPTIONAL clear Clear the specified statistics OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 220: Dsd Intercept Config
dsd Commands dsd intercept config Display/modify HTTP Intercept configuration SYNTAX: dsd intercept config [WDSpoofedIP = <ip-address]> [servertimeout = <number]> [connecterrorurl = <string]> [categoryerrorurl = <string]> [monitorintercepturl = <string]> [unauthorizedrequrl = <string]> [imageredirect = <{disabled|enabled}]> [imageredirecturl = <string]> [alwaysuseip = <{disabled|enabled}]> where: WDSpoofedIP IP address indicating unavailable WAN...
Page 221: Dsd Syslog Config
dsd Commands dsd syslog config Display/modify HTTPI logging configuration SYNTAX: dsd syslog config [syslog = <{none|unauthorized|errors| intercepted|all}]> where: syslog Define which type of events to log OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 222: Dsd Syslog List
dsd Commands dsd syslog list Display HTTPI log file E-DOC-CTC-20071119-0014 v1.0...
Page 223: Dsd Urlfilter Config
dsd Commands dsd urlfilter config Display/modify url filtering configuration SYNTAX: dsd urlfilter config [state = <{disabled|enabled}]> [blockproxy = <{disabled|enabled}]> [blockipaddress = <{disabled|enabled}]> [blockobscuredip = <{disabled|enabled}]> [defaultaction = <{block|accept}]> where: state Enable/disable url filtering OPTIONAL blockproxy Block HTTP requests via a proxy server OPTIONAL blockipaddress Block HTTP requests if host name is IP address...
Page 224: Dsd Urlfilter Rule Add
dsd Commands dsd urlfilter rule add Add a rule SYNTAX: dsd urlfilter rule add url = <string> action = <{block|accept|redirect}> redirect = <string> where: Definition of the url filter REQUIRED action Action to perform when url matches url REQUIRED redirect Redirection url REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 225: Dsd Urlfilter Rule Delete
dsd Commands dsd urlfilter rule delete Remove a rule SYNTAX: dsd urlfilter rule delete index = <number> [url = <string]> where: index Insertion position in the list REQUIRED Definition of the url filter OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 226: Dsd Urlfilter Rule Flush
dsd Commands dsd urlfilter rule flush Remove all current rules E-DOC-CTC-20071119-0014 v1.0...
Page 227: Dsd Urlfilter Rule List
dsd Commands dsd urlfilter rule list Display a list of current rules E-DOC-CTC-20071119-0014 v1.0...
Page 228: Dsd Urlfilter Rule Modify
dsd Commands dsd urlfilter rule modify Modify an existing rule SYNTAX: dsd urlfilter rule modify index = <number> [newurl = <string]> action = <{block|accept|redirect}> redirect = <string> where: index Insertion position in the list REQUIRED newurl Definition of the new url filter OPTIONAL action Action to perform when url matches url...
Page 229: Dyndns Commands
dyndns Commands dyndns Commands dyndns add Add a dynamic DNS client. see page 230 dyndns delete Delete a dynamic DNS client. see page 231 dyndns flush Delete all dynamic DNS clients. see page 232 dyndns host add Add a fully qualified host name see page 233 dyndns host delete Delete a host name...
Page 230: Dyndns Add
dyndns Commands dyndns add Add a dynamic DNS client. SYNTAX: dyndns add name = <string> where: name The dynamic DNS client name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 231: Dyndns Delete
dyndns Commands dyndns delete Delete a dynamic DNS client. SYNTAX: dyndns delete name = <> where: name The dynamic DNS client name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 232: Dyndns Flush
dyndns Commands dyndns flush Delete all dynamic DNS clients. E-DOC-CTC-20071119-0014 v1.0...
Page 233: Dyndns Host Add
dyndns Commands dyndns host add Add a fully qualified host name SYNTAX: dyndns host add group = <> name = <string> where: group The dynamic DNS host group. REQUIRED name The name of an IP host to add. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 234: Dyndns Host Delete
dyndns Commands dyndns host delete Delete a host name SYNTAX: dyndns host delete name = <> where: name The name of an IP host to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 235: Dyndns Host Flush
dyndns Commands dyndns host flush Delete all host names E-DOC-CTC-20071119-0014 v1.0...
Page 236: Dyndns Host List
dyndns Commands dyndns host list List all host names E-DOC-CTC-20071119-0014 v1.0...
Page 237: Dyndns List
dyndns Commands dyndns list List all dynamic DNS clients. E-DOC-CTC-20071119-0014 v1.0...
Page 238: Dyndns Modify
dyndns Commands dyndns modify Modify a dynamic DNS client. SYNTAX: dyndns modify name = <> [intf = <{loop|Internet|LocalNetwork}]> [user = <string]> [password = <password]> [group = <]> [mx = <string]> [backmx = <{disabled|enabled}]> [wildcard = <{disabled|enabled}]> [offline = <{disabled|enabled}]> [service = <{dyndns|statdns|custom|No-IP| DtDNS|gnudip}]>...
Page 239: Dyndns Service List
dyndns Commands dyndns service list List all dynamic DNS services E-DOC-CTC-20071119-0014 v1.0...
Page 240: Dyndns Service Modify
dyndns Commands dyndns service modify Modify specific dynamic DNS service settings SYNTAX: dyndns service modify name = <{dyndns|statdns|custom|No-IP|DtDNS| gnudip}> [server = <string]> [port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|...} or number]> [request = <string]> [updateinterval = <number{0-2097120}]> [retryinterval = <number{0-600}]>...
Page 241: Env Commands
env Commands env Commands env flush Remove all non-system environment see page 242 variables. env get Gets an environment variable. see page 243 env list List all environment variables. see page 244 env set Sets an environment variable. see page 245 env unset Deletes an environment variable.
Page 242: Env Flush
env Commands env flush Remove all non-system environment variables. E-DOC-CTC-20071119-0014 v1.0...
Page 243: Env Get
env Commands env get Gets an environment variable. SYNTAX: env get var = <{_ETHERNET|_COMPANY_NAME|_COMPANY_URL| _PROD_NAME|_PROD_URL|_PROD_SERIAL_NBR|_FII| _BUILD|_BOOTLOADER_VERSION|_BUILDVARIANT| _MODEM_ACCESS_CODE|__SEC_MODEM_ACCESS_CODE| _OUI|_CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME| _PRL|_FIA|_BOARD_NAME|_COMPANY_ID|_COPYRIGHT| _TPVERSION|_PROD_ID|_PROD_FRIENDLY_NAME| _VARIANT_ID|_VARIANT_FRIENDLY_NAME| _MACADDR|_LMACADDR|_WL0_WEPKEY_SERIAL| _WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL| _WL0_SSID_PREFIX|_WL_VERSION}> where: The name of the variable. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 244: Env List
env Commands env list List all environment variables. E-DOC-CTC-20071119-0014 v1.0...
Page 245: Env Set
env Commands env set Sets an environment variable. SYNTAX: env set var = <string> value = <translated string> where: The name of the variable. REQUIRED value A translated quoted string defining the variable REQUIRED value. E-DOC-CTC-20071119-0014 v1.0...
Page 246: Env Unset
env Commands env unset Deletes an environment variable. SYNTAX: env unset var = <{_ETHERNET|_COMPANY_NAME|_COMPANY_URL| _PROD_NAME|_PROD_URL|_PROD_SERIAL_NBR|_FII| _BUILD|_BOOTLOADER_VERSION|_BUILDVARIANT| _MODEM_ACCESS_CODE|__SEC_MODEM_ACCESS_CODE| _OUI|_CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME| _PRL|_FIA|_BOARD_NAME|_COMPANY_ID|_COPYRIGHT| _TPVERSION|_PROD_ID|_PROD_FRIENDLY_NAME| _VARIANT_ID|_VARIANT_FRIENDLY_NAME| _MACADDR|_LMACADDR|_WL0_WEPKEY_SERIAL| _WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL| _WL0_SSID_PREFIX|_WL_VERSION}> where: The name of the variable. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 247: Eth Commands
eth Commands eth Commands eth bridge add Add a new bridge instance. see page 251 eth bridge clear Clear bridge statistics. see page 252 eth bridge config Modify/Display the bridge see page 253 configuration settings. eth bridge delete Delete a bridge instance. see page 254 eth bridge dynvlan actlist Display the active MAC entries for the...
Page 248 eth Commands eth bridge igmpsnooping list Display bridge instance snooped see page 274 groups. eth bridge list Display the current bridge instances. see page 275 eth bridge macadd Add a static MAC address to a bridge see page 276 interface. eth bridge macdelete Remove a MAC address from the see page 277...
Page 249 eth Commands eth bridge xtratag list Display all extra tag mapping entries. see page 296 eth device ifconfig Configure ethernet interface. see page 297 eth device iflist Show status of ethernet interfaces. see page 298 eth flush Flush all ETH interfaces. see page 299 eth ifadd Create a new ETH interface.
Page 250 eth Commands eth switch share list Display shared ports. see page 322 eth switch storm ifconfig Configure per port storm control see page 323 parameters. eth switch storm iflist Display storm control configuration see page 324 per port. eth vlan add Add a new virtual LAN.
Page 251: Eth Bridge Add
eth Commands eth bridge add Add a new bridge instance. SYNTAX: eth bridge add brname = <string> where: brname The name of the new bridge instance. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 252: Eth Bridge Clear
eth Commands eth bridge clear Clear bridge statistics. SYNTAX: eth bridge clear [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 253: Eth Bridge Config
eth Commands eth bridge config Modify/Display the bridge configuration settings. SYNTAX: eth bridge config [brname = <{bridge}]> [age = <number{10-1000000}]> [filter = <{none|no_WAN_broadcast}]> [vlan = <{disabled|enabled}]> [precedencemap = <string]> where: brname The name of a bridge instance. OPTIONAL The lifetime (in seconds) of a dynamically OPTIONAL learned MAC address.
Page 254: Eth Bridge Delete
eth Commands eth bridge delete Delete a bridge instance. SYNTAX: eth bridge delete brname = <{bridge}> where: brname The name of a bridge instance. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 255: Eth Bridge Dynvlan Actlist
eth Commands eth bridge dynvlan actlist Display the active MAC entries for the dynamic VLAN membership. E-DOC-CTC-20071119-0014 v1.0...
Page 256: Eth Bridge Dynvlan Add
eth Commands eth bridge dynvlan add Add a dynamic VLAN membership entry. SYNTAX: eth bridge dynvlan add [id = <number{0-100000}]> hwaddr = <masked-hardware-address> vlan = <{default}> [remvlan = <{default}]> where: The id of the dynamic VLAN membership entry. OPTIONAL hwaddr The (masked) ethernet MAC address of the REQUIRED dynamic VLAN membership entry.
Page 257: Eth Bridge Dynvlan Config
eth Commands eth bridge dynvlan config Modify the dynamic VLAN membership configuration. SYNTAX: eth bridge dynvlan config [timeout = <number{0-100000}]> where: timeout Timeout in seconds for the dynamic entries. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 258: Eth Bridge Dynvlan Delete
eth Commands eth bridge dynvlan delete Delete a dynamic VLAN membership entry. SYNTAX: eth bridge dynvlan delete id = <number{0-100000}> where: REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 259: Eth Bridge Dynvlan Flush
eth Commands eth bridge dynvlan flush Flush all dynamic VLAN membership entries. E-DOC-CTC-20071119-0014 v1.0...
Page 260: Eth Bridge Dynvlan List
eth Commands eth bridge dynvlan list Display a dynamic VLAN membership entry. E-DOC-CTC-20071119-0014 v1.0...
Page 261: Eth Bridge Flush
eth Commands eth bridge flush Flush all bridge instances with their interfaces and properties. SYNTAX: eth bridge flush [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 262: Eth Bridge Ifadd
eth Commands eth bridge ifadd Add a new bridge interface. SYNTAX: eth bridge ifadd [brname = <{bridge}]> intf = <string> where: brname The name of a bridge instance. OPTIONAL intf The new bridge interface name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 263: Eth Bridge Ifattach
eth Commands eth bridge ifattach Attach a bridge interface. SYNTAX: eth bridge ifattach [brname = <{bridge}]> intf = <{}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 264: Eth Bridge Ifconfig
eth Commands eth bridge ifconfig Modify a bridge interface configuration. SYNTAX: eth bridge ifconfig [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [dest = <{}]> [portstate = <{disabled|learning|forwarding}]> [retry = <number{0-65535}]> [priotag = <{disabled|enabled}]> [vlan = <{default}]> [prioconfig = <{disabled|overwrite|increase}]> [ipprec = <{disabled|precedence|dscp}]> [priority = <number{0-7}]>...
Page 265 eth Commands regenprio The priority regeneration table for tagged OPTIONAL ingress packets. ingressfiltering Enable/disable discard of tagged ingress packets OPTIONAL if the interface is not part of the VLAN. acceptvlanonly Enable/disable receipt of tagged ingress packets. OPTIONAL mcastfilter Enable/disable discard of multicast packets for OPTIONAL this interface.
Page 266: Eth Bridge Ifdelete
eth Commands eth bridge ifdelete Delete a bridge interface. SYNTAX: eth bridge ifdelete [brname = <{bridge}]> intf = <{ethport1|ethport2|ethport3|ethport4| WLAN}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 267: Eth Bridge Ifdetach
eth Commands eth bridge ifdetach Detach a bridge interface. SYNTAX: eth bridge ifdetach [brname = <{bridge}]> intf = <{ethport1|ethport2|ethport3|ethport4| WLAN}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 268: Eth Bridge Ifflush
eth Commands eth bridge ifflush flush the bridge interfaces: detach/delete all interfaces. SYNTAX: eth bridge ifflush [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 269: Eth Bridge Iflist
eth Commands eth bridge iflist Display the current bridge interfaces. SYNTAX: eth bridge iflist [brname = <{bridge}]> [intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}]> where: brname The name of a bridge instance. OPTIONAL intf The name of a bridge interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 270: Eth Bridge Igmpsnooping Clear
eth Commands eth bridge igmpsnooping clear Clear snooping statistics. SYNTAX: eth bridge igmpsnooping clear [brname = <{bridge}]> [intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}]> where: brname The name of a bridge instance. OPTIONAL intf The bridge interface currently to be cleared. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 271: Eth Bridge Igmpsnooping Config
eth Commands eth bridge igmpsnooping config Configure bridge instance IGMP Snooping flags. SYNTAX: eth bridge igmpsnooping config [brname = <{bridge}]> [state = <{disabled|enabled}]> [floodrp = <{disabled|enabled}]> [floodmcast = <{disabled|enabled}]> where: brname The name of a bridge instance. OPTIONAL state Enable/Disable the IGMP Snooping. OPTIONAL floodrp Enable/Disable flooding reports to all ports.
Page 272: Eth Bridge Igmpsnooping Ifconfig
eth Commands eth bridge igmpsnooping ifconfig Configure bridge interface IGMP snooping flags and mode. SYNTAX: eth bridge igmpsnooping [brname = <{bridge}]> ifconfig intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [portmode = <{Host|Router|Auto}]> [fastleave = <{disabled|enabled}]> [exptrack = <{disabled|enabled}]> [mrdp = <{disabled|enabled}]> [rgmp = <{disabled|enabled}]> where: brname The bridge instance currently to be configured.
Page 273: Eth Bridge Igmpsnooping Iflist
eth Commands eth bridge igmpsnooping iflist Display bridge interface IGMP status. SYNTAX: eth bridge igmpsnooping iflist [brname = <{bridge}]> [intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}]> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 274: Eth Bridge Igmpsnooping List
eth Commands eth bridge igmpsnooping list Display bridge instance snooped groups. SYNTAX: eth bridge igmpsnooping list [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 275: Eth Bridge List
eth Commands eth bridge list Display the current bridge instances. SYNTAX: eth bridge list [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 276: Eth Bridge Macadd
eth Commands eth bridge macadd Add a static MAC address to a bridge interface. SYNTAX: eth bridge macadd [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> hwaddr = <hardware-address> [vlan = <{default}]> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface.
Page 277: Eth Bridge Macdelete
eth Commands eth bridge macdelete Remove a MAC address from the database. SYNTAX: eth bridge macdelete [brname = <{bridge}]> hwaddr = <hardware-address> [vlan = <{default}]> where: brname The name of a bridge instance. OPTIONAL hwaddr The ethernet MAC address of the entry. REQUIRED vlan The VLAN.
Page 278: Eth Bridge Maclist
eth Commands eth bridge maclist Display the MAC address database. SYNTAX: eth bridge maclist [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 279: Eth Bridge Rule Add
eth Commands eth bridge rule add Add a new constraint to the VLAN learning system. SYNTAX: eth bridge rule add type = <{shared|independant}> vlan = <{default}> [vlan2 = <{default}]> [isi = <number{0-32}]> where: type Type of constraint. REQUIRED vlan The VLAN where the constraint belongs to. REQUIRED vlan2 The second VLAN for a shared constraint.
Page 280: Eth Bridge Rule Delete
eth Commands eth bridge rule delete Delete a constraint from the VLAN learning system. SYNTAX: eth bridge rule delete index = <number{0-32}> where: index Index of the constraint. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 281: Eth Bridge Rule Flush
eth Commands eth bridge rule flush Flush all constraints from the VLAN learning system. E-DOC-CTC-20071119-0014 v1.0...
Page 282: Eth Bridge Rule List
eth Commands eth bridge rule list Display all constraints from the VLAN learning system. E-DOC-CTC-20071119-0014 v1.0...
Page 283: Eth Bridge Select
eth Commands eth bridge select Select the default bridge for configuring interfaces from (if not setting SYNTAX: eth bridge select brname = <{bridge}> where: brname The name of a bridge instance. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 284: Eth Bridge Unknownvlan Ifadd
eth Commands eth bridge unknownvlan ifadd Add bridge interface to unknown 'VLAN'. SYNTAX: eth bridge unknownvlan ifadd [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [untagged = <{disabled|enabled}]> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface to add to the REQUIRED unknown 'VLAN'.
Page 285: Eth Bridge Unknownvlan Ifconfig
eth Commands eth bridge unknownvlan ifconfig Modify bridge interface from unknown 'VLAN'. SYNTAX: eth bridge unknownvlan [brname = <{bridge}]> ifconfig intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [untagged = <{disabled|enabled}]> where: brname The name of a bridge instance. OPTIONAL intf The bridge interface from the unknown 'VLAN' REQUIRED to configure.
Page 286: Eth Bridge Unknownvlan Ifdelete
eth Commands eth bridge unknownvlan ifdelete Delete bridge interface from unknown 'VLAN'. SYNTAX: eth bridge unknownvlan [brname = <{bridge}]> ifdelete intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface to remove from REQUIRED the unknown 'VLAN'.
Page 287: Eth Bridge Unknownvlan Iflist
eth Commands eth bridge unknownvlan iflist Display all interfaces of the unknown 'VLAN'. E-DOC-CTC-20071119-0014 v1.0...
Page 288: Eth Bridge Vlan Ifadd
eth Commands eth bridge vlan ifadd Add bridge interface to virtual LAN. SYNTAX: eth bridge vlan ifadd name = <{default}> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [untagged = <{disabled|enabled}]> where: name The VLAN name. REQUIRED intf The name of the bridge interface to add to the REQUIRED VLAN.
Page 289: Eth Bridge Vlan Ifconfig
eth Commands eth bridge vlan ifconfig Modify bridge interface from virtual LAN. SYNTAX: eth bridge vlan ifconfig name = <{default}> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> untagged = <{disabled|enabled}> where: name The VLAN name. REQUIRED intf The bridge interface from the VLAN to configure. REQUIRED untagged Enable/disable interface as untagged for this...
Page 290: Eth Bridge Vlan Ifdelete
eth Commands eth bridge vlan ifdelete Delete bridge interface from virtual LAN. SYNTAX: eth bridge vlan ifdelete name = <{default}> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> where: name The VLAN name. REQUIRED intf The name of the bridge interface to remove from REQUIRED the VLAN.
Page 291: Eth Bridge Vlan Iflist
eth Commands eth bridge vlan iflist Display all vitual LAN's. E-DOC-CTC-20071119-0014 v1.0...
Page 292: Eth Bridge Xtratag Add
eth Commands eth bridge xtratag add Add an extra tag mapping entry. SYNTAX: eth bridge xtratag add [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> innervid = <{[1-4094]|all|}> outervid = <{[1-4094]|notag|transparant|}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface.
Page 293: Eth Bridge Xtratag Config
eth Commands eth bridge xtratag config Configure an extra tag mapping entry. SYNTAX: eth bridge xtratag config [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> innervid = <{[1-4094]|all|}> outervid = <{[1-4094]|notag|transparant|}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface.
Page 294: Eth Bridge Xtratag Delete
eth Commands eth bridge xtratag delete Delete an extra tag mapping entry. SYNTAX: eth bridge xtratag delete [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> innervid = <{[1-4094]|all|}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. REQUIRED innervid The inner VLAN id [all,1-4094] (all = all inner vid...
Page 295: Eth Bridge Xtratag Flush
eth Commands eth bridge xtratag flush Flush all extra tag mapping entries. E-DOC-CTC-20071119-0014 v1.0...
Page 296: Eth Bridge Xtratag List
eth Commands eth bridge xtratag list Display all extra tag mapping entries. E-DOC-CTC-20071119-0014 v1.0...
Page 297: Eth Device Ifconfig
eth Commands eth device ifconfig Configure ethernet interface. SYNTAX: eth device ifconfig intf = <{ethif1|ethif2|ethif3|ethif4|wlif1}> [type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD| 100BaseTFD} or number]> [state = <{enabled|disabled}]> where: intf The name of a physical interface. REQUIRED type The ethernet type. OPTIONAL state The interface state. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 298: Eth Device Iflist
eth Commands eth device iflist Show status of ethernet interfaces. E-DOC-CTC-20071119-0014 v1.0...
Page 299: Eth Flush
eth Commands eth flush Flush all ETH interfaces. E-DOC-CTC-20071119-0014 v1.0...
Page 300: Eth Ifadd
eth Commands eth ifadd Create a new ETH interface. SYNTAX: eth ifadd intf = <string> where: intf The name for the new ETH interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 301: Eth Ifattach
eth Commands eth ifattach Attach an ETH interface. SYNTAX: eth ifattach intf = <{}> where: intf The name of the ETH interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 302: Eth Ifconfig
eth Commands eth ifconfig Modify an ETH interface. SYNTAX: eth ifconfig intf = <{ethoa_8_35}> [dest = <{bridge|ethoa_8_35}]> [retry = <number{0-65535}]> [wan = <{disabled|enabled}]> [priotag = <{disabled|enabled}]> [vlan = <{default}]> where: intf The name of the ETH interface to configure. REQUIRED dest The destination interface for this ETH interface.
Page 303: Eth Ifdelete
eth Commands eth ifdelete Delete an ETH interface. SYNTAX: eth ifdelete intf = <{}> where: intf The name of the ETH interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 304: Eth Ifdetach
eth Commands eth ifdetach Detach an ETH interface. SYNTAX: eth ifdetach intf = <{ethoa_8_35}> where: intf The name of the ETH interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 305: Eth Iflist
eth Commands eth iflist Display the ETH interfaces. SYNTAX: eth iflist [intf = <{ethoa_8_35}]> where: intf The name of an ETH interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 306: Eth Switch Group Flush
eth Commands eth switch group flush To set all ports to the default settings (all ports in group 0). E-DOC-CTC-20071119-0014 v1.0...
Page 307: Eth Switch Group List
eth Commands eth switch group list List all configured groups. E-DOC-CTC-20071119-0014 v1.0...
Page 308: Eth Switch Group Move
eth Commands eth switch group move Move a specified port to a specified group. SYNTAX: eth switch group move group = <number{0-3}> port = <number{1-4}> where: group The group id. REQUIRED port The port. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 309: Eth Switch Info
eth Commands eth switch info Display switch capabilities E-DOC-CTC-20071119-0014 v1.0...
Page 310: Eth Switch Mirror Capture
eth Commands eth switch mirror capture Define the specified port to be the Mirror Capture Port. SYNTAX: eth switch mirror capture port = <number{1-4}> where: port The port. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 311: Eth Switch Mirror Egress
eth Commands eth switch mirror egress Enable or disable the specified port to be a Transmitted Port Mirroring. SYNTAX: eth switch mirror egress port = <number{1-4}> [state = <{enabled|disabled}]> where: port The port. REQUIRED state Enable/disable state. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 312: Eth Switch Mirror Ingress
eth Commands eth switch mirror ingress Enable or disable the specified port to be a Received Port Mirroring. SYNTAX: eth switch mirror ingress port = <number{1-4}> [state = <{enabled|disabled}]> where: port The port. REQUIRED state Enable/disable state. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 313: Eth Switch Qos Config
eth Commands eth switch qos config Configure common qos parameters. SYNTAX: eth switch qos config state = <{enabled|disabled}> [nbrOfQueues = <number{0-4}]> [realtime = <{enabled|disabled}]> where: state Enable/disable QoS. REQUIRED nbrOfQueues Number of queues. OPTIONAL realtime Enable/disable realtime. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 314: Eth Switch Qos Ifconfig
eth Commands eth switch qos ifconfig Configure per port qos parameters. SYNTAX: eth switch qos ifconfig port = <number{1-4}> mode = <{none|802.1p|high|diffserv}> [flowcontrol = <{disabled|enabled}]> where: port The port. REQUIRED mode Classifier. REQUIRED flowcontrol Enable/disable flow-control. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 315: Eth Switch Qos List
eth Commands eth switch qos list Display qos configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 316: Eth Switch Qos Weights
eth Commands eth switch qos weights Configure the queue weights. SYNTAX: eth switch qos weights queue0 = <number{0-100}> queue1 = <number{0-100}> queue2 = <number{0-100}> queue3 = <number{0-100}> where: queue0 Weight of queue 0 in WFQ (in %). REQUIRED queue1 Weight of queue 1 in WFQ (in %). REQUIRED queue2 Weight of queue 2 in WFQ (in %).
Page 317: Eth Switch Shaper Config
eth Commands eth switch shaper config Configure common ingress shaper parameters. SYNTAX: eth switch shaper config shaper = <number{0--1}> [unicast = <{enabled|disabled}]> [multicast = <{enabled|disabled}]> [broadcast = <{enabled|disabled}]> [control = <{enabled|disabled}]> [unknown = <{enabled|disabled}]> [discard = <{enabled|disabled}]> where: shaper The shaper instance. REQUIRED unicast Shape unicast traffic.
Page 318: Eth Switch Shaper Ifconfig
eth Commands eth switch shaper ifconfig Configure per port shaper parameters. SYNTAX: eth switch shaper ifconfig port = <number{1-4}> ingress = <{enabled|disabled}> shaper = <number{0--1}> [state = <{enabled|disabled}]> [speed = <number{64000-100000000}]> [burstsize = <{}]> where: port The port. REQUIRED ingress Ingress port = enabled;...
Page 319: Eth Switch Shaper Iflist
eth Commands eth switch shaper iflist Display shaper configuration per port. E-DOC-CTC-20071119-0014 v1.0...
Page 320: Eth Switch Share Add
eth Commands eth switch share add Add a port to be shared. SYNTAX: eth switch share add port = <number{1-4}> shared = <number{1-4}> where: port The port. REQUIRED shared The shared port. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 321: Eth Switch Share Delete
eth Commands eth switch share delete Delete a shared port. SYNTAX: eth switch share delete port = <number{1-4}> shared = <number{1-4}> where: port The port. REQUIRED shared The shared port. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 322: Eth Switch Share List
eth Commands eth switch share list Display shared ports. E-DOC-CTC-20071119-0014 v1.0...
Page 323: Eth Switch Storm Ifconfig
eth Commands eth switch storm ifconfig Configure per port storm control parameters. SYNTAX: eth switch storm ifconfig port = <number{1-4}> [state = <{enabled|disabled}]> [rate = <{100|200|300|400}]> [burstsize = <number{2-8}]> [broadcast = <{enabled|disabled}]> [multicast = <{enabled|disabled}]> [unknown = <{enabled|disabled}]> where: port The port.
Page 324: Eth Switch Storm Iflist
eth Commands eth switch storm iflist Display storm control configuration per port. E-DOC-CTC-20071119-0014 v1.0...
Page 325: Eth Vlan Add
eth Commands eth vlan add Add a new virtual LAN. SYNTAX: eth vlan add name = <string> vid = <number{2-4094}> [addrule = <{disabled|enabled}]> where: name The new VLAN name. REQUIRED The new VLAN id. REQUIRED addrule Add the default bridge constraint. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 326: Eth Vlan Delete
eth Commands eth vlan delete Delete a virtual LAN. SYNTAX: eth vlan delete name = <{default}> where: name The VLAN name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 327: Eth Vlan Flush
eth Commands eth vlan flush Flush all virtual LAN's. E-DOC-CTC-20071119-0014 v1.0...
Page 328: Eth Vlan List
eth Commands eth vlan list Display all virtual LAN's. E-DOC-CTC-20071119-0014 v1.0...
Page 329: Exit Command
exit Command exit Command Exits this shell. E-DOC-CTC-20071119-0014 v1.0...
Page 330: Expr Commands
expr Commands E-DOC-CTC-20071119-0014 v1.0...
Page 331: Expr Commands
expr Commands expr Commands expr add Add an expression. see page 332 expr delete Delete an expression. see page 335 expr flush Flush all expressions. see page 336 expr list List expressions. see page 337 expr modify Modify an expression. see page 338 E-DOC-CTC-20071119-0014 v1.0...
Page 332: Expr Add
expr Commands expr add Add an expression. SYNTAX: expr add name = <{wan|local|lan|tunnel|dmz|guest| private|ssdp_ip|mdap_ip|icmp|igmp|imaps|pop2| pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah| ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog}> [type = <{intf|ip|serv|mac}]> mac [!] = <hardware-address> addr [!] = <ip-range> [mask [ = <ip-mask(dotted or cidr)]> [intf [!] = <{loop|Internet|LocalNetwork}]> [intfgroup [!] = <{wan|local|lan|tunnel|dmz| guest} or number]>...
Page 333 expr Commands ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds| nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip| smtp|snmp|snmptrap|snpp|sntp|sql*net|sql- net|sqlserv|sunrpc|syslog|systat|talk|...}or number]> [dstportend = <{at-echo|at-nbp|at-rtmp|at- zis|auth|bgp|biff|bootpc|bootps|finger|ftp| ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds| nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip| smtp|snmp|snmptrap|snpp|sntp|sql*net|sql- net|sqlserv|sunrpc|syslog|systat|talk|...}or number]> [icmptype [!] = <{echo-reply|destination- unreachable|source-quench|redirect|exceeded| parameter-problems|timestamp-request| timestamp-reply|information-request| information-reply|address-mask-request| address-mask-reply} or number]> [icmpcode [!] = <number{0-15}]> [icmpcodeend = <number{0-15}]> where: name The name of an expression to add.
Page 334 expr Commands precedence [!] The precedence in the IP packet (part of tos). OPTIONAL If a value is preceded by a “!”, it means NOT. dscp [!] The diffserv code point in the IP packet (part of OPTIONAL tos). If a value is preceded by a “!”, it means NOT. proto [!] The IP protocol (name or number) in the IP OPTIONAL...
Page 335: Expr Delete
expr Commands expr delete Delete an expression. SYNTAX: expr delete name = <{wan|local|lan|tunnel|dmz|guest| private|ssdp_ip|mdap_ip|icmp|igmp|imaps|pop2| pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah| ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog}> [index = <number]> where: name The name of an expression to delete. REQUIRED index The index of a subexpression. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 336: Expr Flush
expr Commands expr flush Flush all expressions. E-DOC-CTC-20071119-0014 v1.0...
Page 337: Expr List
expr Commands expr list List expressions. SYNTAX: expr list [name = <{_intf_0|_intf_1|_intf_2|DHCP- R_if_0|wan|local|lan|tunnel|dmz|TELNET_if_0| DNS-S_if_0|PING_RESPONDER_if_0|MDAP_if_0| PPTPD_if_0|PPTPGRE_if_0|_addr_127_0_0_1| _addr_10_0_0_138|_addr_192_168_1_254|private| ssdp_ip|mdap_ip|DHCP-R_sv_0|icmp|igmp|ftp| telnet|http|httpproxy|https|RPC|NBT|SMB|imap| imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp| ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip| h323|dhcp|rtsp|ssdp_serv|mdap_serv|syslog| HTTPI_sv_0|SSDP_sv_0}]> [type = <{intf|ip|serv|mac}]> [format = <{pretty|cli}]> where: name The name of an expression to list. OPTIONAL type The type of an expression. OPTIONAL format The format of the expression list.
Page 338: Expr Modify
expr Commands expr modify Modify an expression. SYNTAX: expr modify name = <{wan|local|lan|tunnel|dmz|guest| private|ssdp_ip|mdap_ip|icmp|igmp|imaps|pop2| pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah| ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog}> [type = <{intf|ip|serv|mac}]> index = <number> mac [!] = <hardware-address> addr [!] = <ip-range> [mask [ = <ip-mask(dotted or cidr)]> [intf [!] = <{loop|Internet|LocalNetwork}]> [intfgroup [!] = <{wan|local|lan|tunnel|dmz| guest} or number]>...
Page 339 expr Commands [dstport [!] = <{at-echo|at-nbp|at-rtmp|at- zis|auth|bgp|biff|bootpc|bootps|finger|ftp| ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds| nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip| smtp|snmp|snmptrap|snpp|sntp|sql*net|sql- net|sqlserv|sunrpc|syslog|systat|talk|...}or number]> [dstportend = <{at-echo|at-nbp|at-rtmp|at- zis|auth|bgp|biff|bootpc|bootps|finger|ftp| ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds| nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip| smtp|snmp|snmptrap|snpp|sntp|sql*net|sql- net|sqlserv|sunrpc|syslog|systat|talk|...}or number]> [icmptype [!] = <{echo-reply|destination- unreachable|source-quench|redirect|exceeded| parameter-problems|timestamp-request| timestamp-reply|information-request| information-reply|address-mask-request| address-mask-reply} or number]> [icmpcode [!] = <number{0-15}]>...
Page 340 expr Commands tos [!] The Type Of Service specification in the IP OPTIONAL packet. If a value is preceded by a “!”, it means NOT. precedence [!] The precedence in the IP packet (part of tos). OPTIONAL If a value is preceded by a “!”, it means NOT. dscp [!] The diffserv code point in the IP packet (part of OPTIONAL...
Page 341: Firewall Commands
firewall Commands firewall Commands firewall chain add Add a chain. see page 342 firewall chain delete Delete a chain. see page 343 firewall chain flush Flush all chains. see page 344 firewall chain list Display a list of chains. see page 345 firewall clear Clear firewall configuration.
Page 342: Firewall Chain Add
firewall Commands firewall chain add Add a chain. SYNTAX: firewall chain add chain = <string> where: chain The name of the chain to add. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 343: Firewall Chain Delete
firewall Commands firewall chain delete Delete a chain. SYNTAX: firewall chain delete chain = <chain name> where: chain The name of the chain to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 344: Firewall Chain Flush
firewall Commands firewall chain flush Flush all chains. E-DOC-CTC-20071119-0014 v1.0...
Page 345: Firewall Chain List
firewall Commands firewall chain list Display a list of chains. SYNTAX: firewall chain list [format = <{pretty|cli}]> where: format The format of the chain list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 346: Firewall Clear
firewall Commands firewall clear Clear firewall configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 347: Firewall Config
firewall Commands firewall config Display/Modify firewall configuration. SYNTAX: firewall config [state = <{disabled|enabled}]> [keep = <{disabled|enabled}]> [tcpchecks = <{none|fast|exact}]> [udpchecks = <{disabled|enabled}]> [icmpchecks = <{disabled|enabled}]> [logdefault = <{disabled|enabled}]> [logthreshold = <{disabled|enabled}]> [tcpwindow = <number{0-1073725440}]> where: state Disable/Enable the firewall. OPTIONAL keep Disable/Enable keeping existing connections OPTIONAL...
Page 348: Firewall Debug Clear
firewall Commands firewall debug clear Clear firewall statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 349: Firewall Debug Stats
firewall Commands firewall debug stats Display firewall statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 350: Firewall Level Add
firewall Commands firewall level add Add a new security level. SYNTAX: firewall level add name = <string> [index = <number]> [readonly = <{disabled|enabled}]> [udptrackmode = <{strict|loose}]> [service = <{disabled|enabled}]> [proxy = <{disabled|enabled}]> [text = <quoted string]> [policy = <{default|drop|accept}]> where: name The name of the security level to add.
Page 351: Firewall Level Delete
firewall Commands firewall level delete Delete a security level. SYNTAX: firewall level delete name = <security level name> where: name The name of the security level to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 352: Firewall Level Flush
firewall Commands firewall level flush Flush security level configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 353: Firewall Level List
firewall Commands firewall level list List all security levels. SYNTAX: firewall level list [format = <{pretty|cli}]> where: format The format of the security level list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 354: Firewall Level Modify
firewall Commands firewall level modify Modify a security level. SYNTAX: firewall level modify name = <security level name> [index = <number]> [readonly = <{disabled|enabled}]> [udptrackmode = <{strict|loose}]> [service = <{disabled|enabled}]> [proxy = <{disabled|enabled}]> [text = <quoted string]> [policy = <{default|drop|accept}]> where: name The name of the security level to modify.
Page 355: Firewall Level Set
firewall Commands firewall level set Set/Display active security level. SYNTAX: firewall level set [name = <security level name]> where: name The name of the security level to set active. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 356: Firewall List
firewall Commands firewall list Display firewall configuration. SYNTAX: firewall list [format = <{pretty|cli}]> where: format The format of the firewall list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 357: Firewall Rule Add
firewall Commands firewall rule add Add a rule. SYNTAX: firewall rule add chain = <chain name> [index = <number]> [name = <string]> [clink = <chain name]> [srcintf [!] = <{wan|local|lan|tunnel|dmz| guest}]> [srcip [!] = <{private|ssdp_ip|mdap_ip}]> [dstintf [!] = <{wan|local|lan|tunnel|dmz| guest}]> [dstip [!] = <{private|ssdp_ip|mdap_ip}]>...
Page 358 firewall Commands Disable/Enable logging when this rule applies. OPTIONAL state Disable/Enable this rule. OPTIONAL action The action to be taken when this rule applies REQUIRED ('link' when clink is used). E-DOC-CTC-20071119-0014 v1.0...
Page 359: Firewall Rule Delete
firewall Commands firewall rule delete Delete a rule. SYNTAX: firewall rule delete chain = <chain name> index = <number> where: chain The name of the chain in which to delete the REQUIRED rule. index The number of the rule in the chain. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 360: Firewall Rule Flush
firewall Commands firewall rule flush Flush all rules. SYNTAX: firewall rule flush [chain = <chain name]> where: chain The name of the chain to flush. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 361: Firewall Rule List
firewall Commands firewall rule list Display a list of rules. SYNTAX: firewall rule list [chain = <chain name]> [format = <{pretty|cli}]> where: chain The name of the chain to list the rules of. OPTIONAL format The format of the rule list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 362: Firewall Rule Modify
firewall Commands firewall rule modify Modify a rule. SYNTAX: firewall rule modify chain = <chain name> [index = <number]> [newindex = <number]> [name = <string]> [clink = <chain name]> [[!]srcintf] = <chain name]> [[!]srcip] = <chain name]> [[!]dstintf] = <chain name]> [[!]dstip] = <chain name]>...
Page 363 firewall Commands state Disable/Enable this rule. OPTIONAL action The action to be taken when this rule applies OPTIONAL ('link' when clink is used). E-DOC-CTC-20071119-0014 v1.0...
Page 364 grp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 365: Grp Commands
grp Commands grp Commands grp config Set the grp configuration settings. see page 366 grp flush Flush grp interface settings and see page 367 parameters. grp rip config Set the RIP configuration settings. see page 368 grp rip flush Flush RIP interface settings and global see page 369 parameters.
Page 366: Grp Config
grp Commands grp config Set the grp configuration settings. SYNTAX: grp config [cdistance = <number{0-255}]> [kdistance = <number{0-255}]> [rdistance = <number{0-255}]> [trace = <{disabled|enabled}]> where: cdistance Set the distance of the connected route type. OPTIONAL Default distance is 0. kdistance Set the distance of the kernel route type.
Page 367: Grp Flush
grp Commands grp flush Flush grp interface settings and parameters. E-DOC-CTC-20071119-0014 v1.0...
Page 368: Grp Rip Config
grp Commands grp rip config Set the RIP configuration settings. SYNTAX: grp rip config state = <{disabled|enabled}> [version = <{rip_unspec|rip_v1|rip_v2}]> [updatetime = <number{1-3600}]> where: state Enable/Disable the RIP daemon. REQUIRED version Set the RIP version. OPTIONAL updatetime Set the routing table update timer value. Default OPTIONAL is 30 seconds.
Page 369: Grp Rip Flush
grp Commands grp rip flush Flush RIP interface settings and global parameters. E-DOC-CTC-20071119-0014 v1.0...
Page 370: Grp Rip Ifconfig
grp Commands grp rip ifconfig Configure a RIP interface. SYNTAX: grp rip ifconfig intf = <{LocalNetwork|Internet}> [rip = <{disabled|enabled}]> [rxversion = <{rip_unspec|rip_v1|rip_v2| rip_v1-2}]> [authmode = <{none|cleartext}]> [authstr = <password]> [splithorizon = <{disabled|enabled}]> where: intf The name of the RIP interface to configure. REQUIRED Enable/Disable the RIP status.
Page 371: Grp Rip Show
grp Commands grp rip show Show the RIP settings and the routes in the RIP database. E-DOC-CTC-20071119-0014 v1.0...
Page 372: Grp Rtlist
grp Commands grp rtlist Show the current routes in the grp routing table. SYNTAX: grp rtlist [dst = <ip-address]> [dstmsk = <ip-mask(dotted or cidr)]> where: The destination IP address using this route. OPTIONAL Supports ip/mask notation. dstmsk The destination IP address mask. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 373: Help Command
help Command help Command Displays this help information E-DOC-CTC-20071119-0014 v1.0...
Page 374: Hostmgr Commands
hostmgr Commands E-DOC-CTC-20071119-0014 v1.0...
Page 375: Hostmgr Commands
hostmgr Commands hostmgr Commands hostmgr add Add host device info to hostmgr see page 376 hostmgr clear Remove all hosts from list see page 377 hostmgr config Config hostmgr parameters see page 378 hostmgr delete Delete host device info from hostmgr see page 379 hostmgr flush Flushes hostmgr configuration (i.e.
Page 376: Hostmgr Add
hostmgr Commands hostmgr add Add host device info to hostmgr SYNTAX: hostmgr add mac_addr = <hardware-address> [ip_addr = <ip-address]> [name = <string]> [type = <{generic_device|desktop_computer| laptop_computer|set_top_box|pda| gaming_console|phone|mobile_phone|printer| mass_storage_device}]> [ipintf = <{loop|Internet|LocalNetwork}]> [ethintf = <{bridge|RELAY|ethoa_8_35}]> [physintf = <{ethif1|ethif2|ethif3|ethif4| wlif1}]> where: mac_addr Host MAC address REQUIRED ip_addr...
Page 377: Hostmgr Clear
hostmgr Commands hostmgr clear Remove all hosts from list E-DOC-CTC-20071119-0014 v1.0...
Page 378: Hostmgr Config
hostmgr Commands hostmgr config Config hostmgr parameters SYNTAX: hostmgr config [state = <{disabled|enabled}]> [scantime = <number{10-600}]> [autosave = <{disabled|enabled}]> [trace = <{disabled|enabled}]> where: state Enable/disable hostmgr deamon OPTIONAL scantime Time between two scans (sec) OPTIONAL autosave Enable/disable automatic saves to flash OPTIONAL trace Enable/disable hostmgr traces...
Page 379: Hostmgr Delete
hostmgr Commands hostmgr delete Delete host device info from hostmgr SYNTAX: hostmgr delete mac_addr = <hardware-address> where: mac_addr Host MAC address REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 380: Hostmgr Flush
hostmgr Commands hostmgr flush Flushes hostmgr configuration (i.e. clean & to defaults) E-DOC-CTC-20071119-0014 v1.0...
Page 381: Hostmgr List
hostmgr Commands hostmgr list List all host devices SYNTAX: hostmgr list [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 382 ids Commands E-DOC-CTC-20071119-0014 v1.0...
Page 383: Ids Commands
ids Commands ids Commands ids clear Clear IDS statistics. see page 384 ids config Display/Modify IDS configuration. see page 385 ids parser list Display ids parser configuration. see page 386 ids parser modify Modify ids parser configuration. see page 387 ids pattern clear Reset pattern tracker.
Page 384: Ids Clear
ids Commands ids clear Clear IDS statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 385: Ids Config
ids Commands ids config Display/Modify IDS configuration. SYNTAX: ids config [state = <{disabled|enabled}]> where: state Enable/Disable ids checks. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 386: Ids Parser List
ids Commands ids parser list Display ids parser configuration. SYNTAX: ids parser list [parser = <parser]> where: parser The name of the parser. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 387: Ids Parser Modify
ids Commands ids parser modify Modify ids parser configuration. SYNTAX: ids parser modify [parser = <parser]> state = <{disabled|enabled}> where: parser The name of the parser. OPTIONAL state The state of the parser. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 388: Ids Pattern Clear
ids Commands ids pattern clear Reset pattern tracker. E-DOC-CTC-20071119-0014 v1.0...
Page 389: Ids Pattern List
ids Commands ids pattern list Display patterns in pattern tracker. SYNTAX: ids pattern list [size = <{10|100|full} or number]> where: size Modify the size of pattern tracker list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 390: Ids Pattern Stats
ids Commands ids pattern stats Display pattern tracker statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 391: Ids Signature List
ids Commands ids signature list Display ids signature configuration. SYNTAX: ids signature list [signature = <fragment_sweep|zero- length_fragment_size|small_fragment_size| ip_protocol_scan|tcp_port_scan| tcp_syn_scan|stealth_tcp_null_scan| stealth_tcp_fin_scan|stealth_tcp_xmas_scan| stealth_tcp_full_xmas_scan| stealth_tcp_vecna_scan|stealth_tcp_syn- fin_scan|udp_port_scan|ping_sweep_scan| tcp_syn_flood|udp_flood|ping_flood| icmp_unreachable_storm|smurf_broadcast_attack| smurf_storm_attack|fraggle_broadcast_attack| fraggle_storm_attack|land_attack}]> where: signature The name of the signature. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 392: Ids Signature Modify
ids Commands ids signature modify Modify ids signature configuration. SYNTAX: ids signature modify [signature = <fragment_sweep|zero- length_fragment_size|small_fragment_size| ip_protocol_scan|tcp_port_scan| tcp_syn_scan|stealth_tcp_null_scan| stealth_tcp_fin_scan|stealth_tcp_xmas_scan| stealth_tcp_full_xmas_scan| stealth_tcp_vecna_scan|stealth_tcp_syn- fin_scan|udp_port_scan|ping_sweep_scan| tcp_syn_flood|udp_flood|ping_flood| icmp_unreachable_storm|smurf_broadcast_attack| smurf_storm_attack|fraggle_broadcast_attack| fraggle_storm_attack|land_attack}]> state = <{disabled|enabled}> where: signature The name of the signature. OPTIONAL state The state of the sign. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 393: Ids Threshold Clear
ids Commands ids threshold clear Reset IDS thresholds. E-DOC-CTC-20071119-0014 v1.0...
Page 394: Ids Threshold List
ids Commands ids threshold list Display IDS thresholds. E-DOC-CTC-20071119-0014 v1.0...
Page 395: Ids Threshold Modify
ids Commands ids threshold modify Modify IDS threshold. SYNTAX: ids threshold modify index = <number> [window = <number]> [limit = <number]> [scaling = <{disabled|enabled}]> where: index The index of the threshold. REQUIRED window The time window of the threshold. OPTIONAL limit The limit of the threshold.
Page 396: Igmp Commands
igmp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 397: Igmp Commands
igmp Commands igmp Commands igmp host config Display/Modify global IGMP see page 398 configuration. igmp host debug clear Clear IGMP statistics. see page 399 igmp host debug stats Print IGMP statistics. see page 400 igmp host flush Flush the IGMP settings. see page 401 igmp host ifconfig Configure an IGMP interface.
Page 398: Igmp Host Config
igmp Commands igmp host config Display/Modify global IGMP configuration. SYNTAX: igmp host config [requirera = <{disabled|enabled}]> where: requirera Enable/Disable the router alert IP option check. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 399: Igmp Host Debug Clear
igmp Commands igmp host debug clear Clear IGMP statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 400: Igmp Host Debug Stats
igmp Commands igmp host debug stats Print IGMP statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 401: Igmp Host Flush
igmp Commands igmp host flush Flush the IGMP settings. E-DOC-CTC-20071119-0014 v1.0...
Page 402: Igmp Host Ifconfig
igmp Commands igmp host ifconfig Configure an IGMP interface. SYNTAX: igmp host ifconfig intf = <{loop|Internet|LocalNetwork}> version = <{none|IGMPv1|IGMPv2|IGMPv3}> where: intf The IP interface name. REQUIRED version The IGMP version of the IP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 403: Igmp Host Iflist
igmp Commands igmp host iflist Show the configuration of the IGMP interfaces. SYNTAX: igmp host iflist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 404: Igmp Host List
igmp Commands igmp host list Show the IGMP groups. SYNTAX: igmp host list [intf = <{loop|Internet|LocalNetwork}]> [expand = <{disabled|enabled}]> where: intf The IP interface name. OPTIONAL expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 405: Igmp Proxy Config
igmp Commands igmp proxy config Configure the IGMP proxy. SYNTAX: igmp proxy config [state = <{disabled|enabled}]> [qi = <number{1-86400}]> [qri = <number{1-86400}]> [lmqi = <number{1-86400}]> [rv = <number{2-10}]> [advinter = <number{4-180}]> [initadvinter = <number{1-4}]> [initadvcount = <number{1-10}]> [requirera = <{disabled|enabled}]> [localgroup = <{disabled|enabled}]>...
Page 406: Igmp Proxy Debug Clear
igmp Commands igmp proxy debug clear Clear IGMP proxy statistics E-DOC-CTC-20071119-0014 v1.0...
Page 407: Igmp Proxy Debug Stats
igmp Commands igmp proxy debug stats Print IGMP proxy statistics E-DOC-CTC-20071119-0014 v1.0...
Page 408: Igmp Proxy Debug Traceconfig
igmp Commands igmp proxy debug traceconfig Modify IGMP proxy trace configuration SYNTAX: igmp proxy debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 409: Igmp Proxy Flush
igmp Commands igmp proxy flush Flush all IGMP proxy settings and learned groups E-DOC-CTC-20071119-0014 v1.0...
Page 410: Igmp Proxy Grouplist
igmp Commands igmp proxy grouplist Show the learned groups on an IGMP proxy interface. SYNTAX: igmp proxy grouplist [intf = <{LocalNetwork}]> [expand = <{disabled|enabled}]> where: intf The name of the IGMP proxy interface to be OPTIONAL listed. expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 411: Igmp Proxy Ifconfig
igmp Commands igmp proxy ifconfig Configure an IGMP proxy interface. SYNTAX: igmp proxy ifconfig intf = <{LocalNetwork|Internet}> [state = <{inactive|downstream|upstream}]> [version = <{IGMPv1|IGMPv2|IGMPv3}]> [fastleave = <{disabled|enabled}]> [exptrack = <{disabled|enabled}]> [mrd = <{disabled|enabled}]> where: intf The name of the IGMP proxy interface to be REQUIRED configured.
Page 412: Igmp Proxy Iflist
igmp Commands igmp proxy iflist Show the configuration of an IGMP proxy interface. SYNTAX: igmp proxy iflist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 413: Igmp Proxy Mbslist
igmp Commands igmp proxy mbslist Show the IGMP proxy membership database (merge of all learned groups). E-DOC-CTC-20071119-0014 v1.0...
Page 414 interface Command E-DOC-CTC-20071119-0014 v1.0...
Page 415: Interface Command
interface Command interface Command Display interfaces. SYNTAX: interface list [expand = <{disabled|enabled}]> [reverse = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL reverse Reverse listing (lower layer iso. upper layer). OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 416 ip Commands E-DOC-CTC-20071119-0014 v1.0...
Page 417: Ip Commands
ip Commands ip Commands ip arpadd Add an entry to the ARP cache of a see page 419 broadcast IP interface. ip arpdelete Delete an ARP entry. see page 420 ip arplist Display the ARP cache. see page 421 ip auto flush Flushes autoIP interfaces.
Page 418 ip Commands ip ipadd Assign an IP address to an IP see page 442 interface. ip ipconfig Modify an IP address configuration. see page 443 ip ipdelete Remove an IP address from an IP see page 444 interface. ip iplist Display all configured IP addresses.
Page 419: Ip Arpadd
ip Commands ip arpadd Add an entry to the ARP cache of a broadcast IP interface. SYNTAX: ip arpadd intf = <{LocalNetwork}> ip = <ip-range> [hwaddr = <hardware-address]> where: intf The IP interface name. REQUIRED The IP address [range] of the entry to add. REQUIRED hwaddr The hardware address (e.g.
Page 420: Ip Arpdelete
ip Commands ip arpdelete Delete an ARP entry. SYNTAX: ip arpdelete intf = <{LocalNetwork}> ip = <ip-range> [hwaddr = <hardware-address]> where: intf The IP interface name. REQUIRED The IP address [range] of the entry to delete. REQUIRED hwaddr The hardware address (e.g. Ethernet MAC OPTIONAL address) of the entry to delete.
Page 421: Ip Arplist
ip Commands ip arplist Display the ARP cache. E-DOC-CTC-20071119-0014 v1.0...
Page 422: Ip Auto Flush
ip Commands ip auto flush Flushes autoIP interfaces. E-DOC-CTC-20071119-0014 v1.0...
Page 423: Ip Auto Ifadd
ip Commands ip auto ifadd Creates a new autoIP interface. SYNTAX: ip auto ifadd intf = <{loop|Internet|LocalNetwork}> [addr = <ip-address]> where: intf The name of the IP interface for which a link- REQUIRED local address has to be allocated. addr The preferred link-local IP address.
Page 424: Ip Auto Ifattach
ip Commands ip auto ifattach Select and assign a link-local address to an autoIP interface. SYNTAX: ip auto ifattach intf = <> where: intf The name of the autoIP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 425: Ip Auto Ifconfig
ip Commands ip auto ifconfig Configures an autoIP interface. SYNTAX: ip auto ifconfig intf = <> [addr = <ip-address]> [poolstart = <ip-address]> [poolend = <ip-address]> [netmask = <ip-mask(dotted or cidr)]> [claim = <number{0-65535}]> [defence = <number{0-65535}]> [probe = <number{0-65535}]> [interval = <number{1-65535}]> where: intf The name of the autoIP interface to configure.
Page 426: Ip Auto Ifdelete
ip Commands ip auto ifdelete Deletes an existing autoIP interface. SYNTAX: ip auto ifdelete intf = <> where: intf The name of the autoIP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 427: Ip Auto Ifdetach
ip Commands ip auto ifdetach Release the link-local address for the given autoIP interface. SYNTAX: ip auto ifdetach intf = <> where: intf The name of the autoIP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 428: Ip Auto Iflist
ip Commands ip auto iflist Shows the autoIP interfaces. SYNTAX: ip auto iflist [intf = <]> where: intf The name of a autoIP interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 429: Ip Config
ip Commands ip config Display/Modify global IP stack configuration. SYNTAX: ip config [forwarding = <{disabled|enabled}]> [redirects = <{disabled|enabled}]> [checkoptions = <{disabled|enabled| transparent}]> [netbroadcasts = <{disabled|enabled}]> [ttl = <number{0-255}]> [fraglimit = <number{1-1024}]> [defragmode = <{disabled|enabled}]> [addrcheck = <{off|own|static|dynamic}]> [mssclamping = <{disabled|enabled}]> [natloopback = <{disabled|enabled}]>...
Page 430: Ip Debug Httpprobe
ip Commands ip debug httpprobe Send HTTP probe to measure the round trip time taken to connect and access SYNTAX: ip debug httpprobe url = <string> [version = <{1.0|1.1}]> where: The Uniform Resource location identifying the REQUIRED HTTP server. version The version of the HTTP Server.
Page 431: Ip Debug Sendto
ip Commands ip debug sendto Send UDP packets. SYNTAX: ip debug sendto addr = <ip-address> [count = <number{1-1000000}]> [size = <number{0-20000}]> [interval = <number{1-1000000}]> [listen = <{disabled|enabled}]> [dffield = <{disabled|enabled}]> [srcaddr = <ip-address]> [srcport = <number{1-65535}]> dstport = <number{1-65535}> [dstintf = <{loop|Internet|LocalNetwork}]> where: addr The destination IP address.
Page 432: Ip Debug Stats
ip Commands ip debug stats Display statistics. SYNTAX: ip debug stats proto = <{ip|udp|tcp|icmp}> where: proto The protocol for which to display the statistics. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 433: Ip Debug Traceconfig
ip Commands ip debug traceconfig Display/Modify IP stack trace configuration. SYNTAX: ip debug traceconfig [input = <{none|label|-telnet|-host|- broadcast|all}]> [forward = <{none|label|-telnet|-host|- broadcast|all}]> [output = <{none|label|-telnet|-host|- broadcast|all}]> [drop = <{none|label|-telnet|-host|-broadcast| all}]> [path = <{none|label|-telnet|-host|-broadcast| all}]> [mode = <{line|dump}]> [arp = <{none|all}]> where: input Define the packets that will be traced.
Page 434: Ip Flush
ip Commands ip flush Flush all static IP parameters. Dynamic info (e.g. from PPP links) remains. E-DOC-CTC-20071119-0014 v1.0...
Page 435: Ip Ifadd
ip Commands ip ifadd Create an IP interface. SYNTAX: ip ifadd intf = <string> dest = <{ethoa_8_35}> where: intf An IP interface name. REQUIRED dest An network interface name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 436: Ip Ifattach
ip Commands ip ifattach Attach an IP interface. SYNTAX: ip ifattach intf = <{}> where: intf An IP interface name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 437: Ip Ifconfig
ip Commands ip ifconfig Modify an IP interface configuration. SYNTAX: ip ifconfig intf = <{loop|Internet|LocalNetwork}> [mtu = <number{68-65535}]> [status = <{down|up}]> [hwaddr = <hardware-address]> [group = <{wan|local|lan|tunnel|dmz|guest} or number]> [linksensing = <{disabled|enabled}]> [primary = <{disabled|enabled}]> [mcastpromisc = <{disabled|enabled}]> where: intf An IP interface name.
Page 438: Ip Ifdelete
ip Commands ip ifdelete Delete an IP interface. SYNTAX: ip ifdelete intf = <{LocalNetwork}> where: intf An IP interface name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 439: Ip Ifdetach
ip Commands ip ifdetach Detach an IP interface. SYNTAX: ip ifdetach intf = <{loop|LocalNetwork}> where: intf An IP interface name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 440: Ip Iflist
ip Commands ip iflist Display all IP interfaces. SYNTAX: ip iflist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 441: Ip Ifwait
ip Commands ip ifwait Wait for a status change of an IP interface. SYNTAX: ip ifwait intf = <{loop|Internet|LocalNetwork}> [timeout = <number{1-600000}]> [adminstatus = <{down|up}]> [operstatus = <{down|up}]> [linkstatus = <{down|up}]> where: intf An IP interface name. REQUIRED timeout The timeout in seconds. OPTIONAL adminstatus The administrative state of the interface.
Page 442: Ip Ipadd
ip Commands ip ipadd Assign an IP address to an IP interface. SYNTAX: ip ipadd intf = <{loop|Internet|LocalNetwork}> addr = <ip-address> [netmask = <ip-mask(dotted or cidr)]> [pointopoint = <ip-address]> [addroute = <{disabled|enabled}]> where: intf The IP interface name. REQUIRED addr The new IP address to add.
Page 443: Ip Ipconfig
ip Commands ip ipconfig Modify an IP address configuration. SYNTAX: ip ipconfig addr = <ip-address> [preferred = <{disabled|enabled}]> [primary = <{disabled|enabled}]> where: addr The IP address to configure. REQUIRED preferred Make IP address the preferred address for that OPTIONAL subnet. primary Make IP address the primary address for the OPTIONAL...
Page 444: Ip Ipdelete
ip Commands ip ipdelete Remove an IP address from an IP interface. SYNTAX: ip ipdelete addr = <ip-address> where: addr The IP address to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 445: Ip Iplist
ip Commands ip iplist Display all configured IP addresses. E-DOC-CTC-20071119-0014 v1.0...
Page 446: Ip Mcast Flush
ip Commands ip mcast flush Flush the multicast routing table. E-DOC-CTC-20071119-0014 v1.0...
Page 447: Ip Mcast Rtadd
ip Commands ip mcast rtadd Add a multicast route to the multicast routing table. SYNTAX: ip mcast rtadd srcintf = <{loop|Internet|LocalNetwork}> [src = <ip-address]> grp = <ip-address> dstintf = <{loop|Internet|LocalNetwork}> [ttl = <number{1-255}]> [ttlincr = <{disabled|enabled}]> where: srcintf The source IP interface. REQUIRED The source IP address.
Page 448: Ip Mcast Rtdelete
ip Commands ip mcast rtdelete Delete a multicast route from the multicast routing table. SYNTAX: ip mcast rtdelete srcintf = <{loop|Internet|LocalNetwork}> [src = <ip-address]> grp = <ip-address> dstintf = <{loop|Internet|LocalNetwork}> where: srcintf The source IP interface. REQUIRED The source IP address. OPTIONAL The multicast group IP address.
Page 449: Ip Mcast Rtlist
ip Commands ip mcast rtlist Display the multicast routing table. SYNTAX: ip mcast rtlist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 450: Ip Rtadd
ip Commands ip rtadd Add a route to the routing table. SYNTAX: ip rtadd dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [gateway = <ip-address]> [intf = <{loop|Internet|LocalNetwork}]> [srcintf = <{loop|Internet|LocalNetwork}]> [metric = <number{0-255}]> where: The destination IP address(es) using this route. REQUIRED Supports ip/mask notation.
Page 451: Ip Rtdelete
ip Commands ip rtdelete Delete a route from the routing table. SYNTAX: ip rtdelete dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [gateway = <ip-address]> [intf = <{loop|Internet|LocalNetwork}]> where: The destination IP address specification of the REQUIRED route to delete.
Page 452: Ip Rtlist
ip Commands ip rtlist Display the routing table. SYNTAX: ip rtlist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 453: Ipqos Commands
ipqos Commands ipqos Commands ipqos config Modify the IP QoS configuration for a see page 454 given destination of an interface. ipqos ef config Modify an IP QoS EF timer see page 455 configuration for an interface. ipqos ef list Display the IP QoS EF timers.
Page 454: Ipqos Config
ipqos Commands ipqos config Modify the IP QoS configuration for a given destination of an interface. SYNTAX: ipqos config dest = <{atm_pvc_8_35}> [state = <{disabled|enabled}]> [discard = <{tail|early}]> [priority = <{wfq|strict|wrr}]> [realtimerate = <number{1-100}]> [burstsize = <number{1-64}]> [weight1 = <number{1-97}]> [weight2 = <number{1-97}]>...
Page 455: Ipqos Ef Config
ipqos Commands ipqos ef config Modify an IP QoS EF timer configuration for an interface. SYNTAX: ipqos ef config intf = <{loop|Internet|LocalNetwork}> [state = <{disabled|enabled}]> [timeout = <number{100-10000}]> [mtu = <number{68-65535}]> where: intf The IP interface name. REQUIRED state Enable, disable IP QoS EF timer for the interface. OPTIONAL timeout The timeout in mili seconds.
Page 456: Ipqos Ef List
ipqos Commands ipqos ef list Display the IP QoS EF timers. E-DOC-CTC-20071119-0014 v1.0...
Page 457: Ipqos Ef Stats
ipqos Commands ipqos ef stats Display the IP QoS EF timer statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 458: Ipqos List
ipqos Commands ipqos list Display the IP QoS configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 459: Ipqos Queue Clear
ipqos Commands ipqos queue clear Clear the IP QoS statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 460: Ipqos Queue Config
ipqos Commands ipqos queue config Modify the IP QoS subqueue configuration. SYNTAX: ipqos queue config dest = <{atm_pvc_8_35}> queue = <number{0-5}> [propagate = <{disabled|enabled}]> [ecnmarking = <{disabled|enabled}]> [ackfiltering = <{disabled|enabled}]> [maxpackets = <number{0-250}]> [maxbytes = <number{0-128}]> [respackets = <number{0-250}]> [resbytes = <number{0-128}]> [hold = <number]>...
Page 461: Ipqos Queue List
ipqos Commands ipqos queue list Display the IP QoS subqueue configuration. SYNTAX: ipqos queue list [dest = <{atm_pvc_8_35}]> where: dest The destination of the interface. Typically, a OPTIONAL phonebook entry. E-DOC-CTC-20071119-0014 v1.0...
Page 462: Ipqos Queue Stats
ipqos Commands ipqos queue stats Display the IP QoS subqueue statistics. SYNTAX: ipqos queue stats [dest = <{atm_pvc_8_35}]> where: dest The destination of the interface. Typically, a OPTIONAL phonebook entry. E-DOC-CTC-20071119-0014 v1.0...
Page 463: Label Commands
label Commands label Commands label add Add a label. see page 464 label chain add Add a chain. see page 465 label chain delete Delete a chain. see page 466 label chain flush Flush all chains. see page 467 label chain list Display a list of chains.
Page 464: Label Add
label Commands label add Add a label. SYNTAX: label add name = <string> where: name The name of a label to add. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 465: Label Chain Add
label Commands label chain add Add a chain. SYNTAX: label chain add chain = <string> where: chain The name of the chain to add. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 466: Label Chain Delete
label Commands label chain delete Delete a chain. SYNTAX: label chain delete chain = <chain name> where: chain The name of the chain to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 467: Label Chain Flush
label Commands label chain flush Flush all chains. E-DOC-CTC-20071119-0014 v1.0...
Page 468: Label Chain List
label Commands label chain list Display a list of chains. SYNTAX: label chain list [format = <{pretty|cli}]> where: format The format of the chain list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 469: Label Delete
label Commands label delete Delete a label. SYNTAX: label delete name = <{DSCP|Interactive|Management|Video| VoIP-RTP|VoIP-Signal|default}> where: name The name of a label. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 470: Label Flush
label Commands label flush Flush all label. E-DOC-CTC-20071119-0014 v1.0...
Page 471: Label List
label Commands label list Display the labels. SYNTAX: label list [name = <{DSCP|Interactive|Management|Video| VoIP-RTP|VoIP-Signal|default}]> where: name The name of a label. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 472: Label Modify
label Commands label modify Modify a label configuration. SYNTAX: label modify name = <{DSCP|Interactive|Management|Video| VoIP-RTP|VoIP-Signal|default}> [classification = <{ignore|overwrite| increase}]> [defclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13| 14|15|dscp|default}]> [ackclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13| 14|15|prioritize|defclass}]> [bidirectional = <{disabled|enabled}]> [inheritance = <{disabled|enabled}]> [tosmarking = <{disabled|enabled}]> [tos = <number{0-255}]> [dscp = <{ef|af11|af12|af13|af21|af22|af23| af31|af32|af33|af41|af42|af43|cs0|cs1|cs2|cs3| cs4|cs5|cs6|cs7} or number]>...
Page 473: Label Rule Add
label Commands label rule add Add a rule. SYNTAX: label rule add chain = <chain name> [index = <number]> [name = <string]> [clink = <chain name]> [srcintf [!] = <{wan|local|lan|tunnel|dmz| guest}]> [srcip [!] = <{private|ssdp_ip|mdap_ip}]> [dstip [!] = <{private|ssdp_ip|mdap_ip}]> [serv [!] = <{icmp|igmp|ftp|telnet|http| httpproxy|https|RPC|NBT|SMB|imap|esp|ah| ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog}]>...
Page 474: Label Rule Delete
label Commands label rule delete Delete a rule. SYNTAX: label rule delete chain = <chain name> index = <number> where: chain The name of the chain in which to delete the REQUIRED rule. index The number of the rule in the chain. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 475: Label Rule Flush
label Commands label rule flush Flush all rules. SYNTAX: label rule flush [chain = <chain name]> where: chain The name of the chain to flush. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 476: Label Rule List
label Commands label rule list Display a list of rules. SYNTAX: label rule list [chain = <chain name]> [format = <{pretty|cli}]> where: chain The name of the chain to list the rules of. OPTIONAL format The format of the rule list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 477: Label Rule Modify
label Commands label rule modify Modify a rule. SYNTAX: label rule modify chain = <chain name> [index = <number]> [newindex = <number]> [name = <string]> [clink = <chain name]> [[!]srcintf] = <chain name]> [[!]srcip] = <chain name]> [[!]dstip] = <chain name]> [[!]serv] = <chain name]>...
Page 478 language Commands E-DOC-CTC-20071119-0014 v1.0...
Page 479: Language Commands
language Commands language Commands language config Select a language. see page 480 language delete Delete one or all language archives. see page 481 language list List available languages archives. see page 482 E-DOC-CTC-20071119-0014 v1.0...
Page 480: Language Config
language Commands language config Select a language. SYNTAX: language config [language = <string]> [complete = <{yes|no}]> where: language Language code : OSI language code (2 chars) for OPTIONAL language (en=English) complete Enable translation for expert pages. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 481: Language Delete
language Commands language delete Delete one or all language archives. SYNTAX: language delete [file = <string]> [all = <{yes|no}]> where: file Filename : name of language archive to delete OPTIONAL Deletes all languages archives. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 482: Language List
language Commands language list List available languages archives. E-DOC-CTC-20071119-0014 v1.0...
Page 483: Mbus Commands
mbus Commands mbus Commands mbus client authenticate Authenticate a session see page 484 mbus client config Modify client parameters see page 485 mbus client exec Execute mbus command see page 486 mbus client register Register cli client to mbus see page 488 mbus client termsession Terminate a session see page 489...
Page 484: Mbus Client Authenticate
mbus Commands mbus client authenticate Authenticate a session SYNTAX: mbus client authenticate type = <{cleartext|md5|crypt|digest}> username = <quoted string> password = <password> where: type Authentication type REQUIRED username User name REQUIRED password password REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 485: Mbus Client Config
mbus Commands mbus client config Modify client parameters SYNTAX: mbus client config [writelock = <{enabled|disabled}]> [wlgetimeout = <number]> [wlidletimeout = <number]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [id = <number]> where: writelock Get/release mbus writelock OPTIONAL wlgetimeout Writelock get timeout in seconds (forever=-1, OPTIONAL *default=nowait=0) wlidletimeout...
Page 486: Mbus Client Exec
mbus Commands mbus client exec Execute mbus command SYNTAX: mbus client exec cmd = <{getpath|getcount|getnames|getvalues| setvalue|addobject|deleteobject|subscribe| unsubscribe|getaccessrights|setaccessrights}> [param = <quoted string]> [value = <quoted string]> [gettype = <{parameter|path|object}]> [depth = <number]> [processcmd = <{enabled|disabled}]> [onerrorrollback = <{enabled|disabled}]> [usecallback = <{enabled|disabled}]> [filter = <quoted string]>...
Page 487 mbus Commands =, <, <=, >, >=, and, or, not. The left operand is a parameter name. The right operand is a parameter value. For boolean operators the operands are filters. Example: '(== Name eth0)'. path Fully qualified mbus path OPTIONAL flags Client command data flags...
Page 488: Mbus Client Register
mbus Commands mbus client register Register cli client to mbus SYNTAX: mbus client register [dmtree = <{igd|atomic|system}]> [type = <{indexpath|objidpath|keystrpath}]> [dlink = <{local_ipc|remote_inet}]> [mbusd_addr = <quoted string]> [refresolv = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL type Path type (default = indexpath) OPTIONAL dlink Daemon link (default = local_ipc)
Page 489: Mbus Client Termsession
mbus Commands mbus client termsession Terminate a session SYNTAX: mbus client termsession id = <number> where: id of session to terminate REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 490: Mbus Client Unregister
mbus Commands mbus client unregister Unregister cli client from mbus E-DOC-CTC-20071119-0014 v1.0...
Page 491: Mbus Debug Clearstats
mbus Commands mbus debug clearstats Reset mbus statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 492: Mbus Debug Loadobjects
mbus Commands mbus debug loadobjects Load/sync object instances from plugins SYNTAX: mbus debug loadobjects [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [flush = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL path Fully qualified mbus path OPTIONAL type Path type (default = indexpath OPTIONAL...
Page 493: Mbus Debug Stats
mbus Commands mbus debug stats Display mbus statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 494: Mbus Debug Traceconfig
mbus Commands mbus debug traceconfig Modify mbus trace settings. SYNTAX: mbus debug traceconfig [level = <number{0-4}]> where: level Select mbus trace level (0-4). OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 495: Mbus Debug Unloadobjects
mbus Commands mbus debug unloadobjects Unload object instances SYNTAX: mbus debug unloadobjects [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [flush = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL path Fully qualified mbus path OPTIONAL type Path type OPTIONAL flush Flush objects before load (default=disabled)
Page 496: Mbus Listcontexts
mbus Commands mbus listcontexts Display the context instances SYNTAX: mbus listcontexts [dmtree = <{igd|atomic|system}]> [expand = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL expand Details enabled/disabled OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 497: Mbus Listenums
mbus Commands mbus listenums Display the registered enumtypes SYNTAX: mbus listenums [dmtree = <{igd|atomic|system}]> [name = <quoted string]> [expand = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL name Filter enumtypes by (part of) the name OPTIONAL expand Details enabled/disabled OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 498: Mbus Listobjects
mbus Commands mbus listobjects Display the object instances SYNTAX: mbus listobjects [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [output = <{tree|list}]> [showflags = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL path Fully qualified mbus path to list. OPTIONAL type Path type (default = indexpath)
Page 499: Mbus Listsubscriptions
mbus Commands mbus listsubscriptions Display the subscription instances SYNTAX: mbus listsubscriptions [dmtree = <{igd|atomic|system}]> where: dmtree Select mbusd datamodel tree. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 500: Mbus Listtypes
mbus Commands mbus listtypes Display the registered objecttypes SYNTAX: mbus listtypes [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [expand = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL path Fully qualified mbus path to list. OPTIONAL expand Details enabled/disabled OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 501: Mbus Pluginevent
mbus Commands mbus pluginevent Simulate event from plugin SYNTAX: mbus pluginevent ctxid = <number{0--2}> type = <{addobj|delobj|updobj}> path = <quoted string> [name = <quoted string]> [value = <quoted string]> [orivalue = <quoted string]> where: ctxid Plugin context id REQUIRED type Event type REQUIRED path...
Page 502: Mbus Unregister
mbus Commands mbus unregister Unregister a client/plugin context SYNTAX: mbus unregister id = <number> where: Select message-based client/plugin context id. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 503: Memm Commands
memm Commands memm Commands memm debug clearstats Clear time statistics. see page 504 memm debug lock stats Display lock statistics. see page 505 memm debug lock traceconfig Modify lock trace settings. see page 506 memm debug stats Display memm time statistics. see page 507 memm debug tag (Un)tag memory manager objects.
Page 504: Memm Debug Clearstats
memm Commands memm debug clearstats Clear time statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 505: Memm Debug Lock Stats
memm Commands memm debug lock stats Display lock statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 506: Memm Debug Lock Traceconfig
memm Commands memm debug lock traceconfig Modify lock trace settings. SYNTAX: memm debug lock traceconfig [level = <number{0-4}]> [name = <string]> where: level Select memm trace level (0-4). OPTIONAL name application name filter for lock traces (empty OPTIONAL displays all lock traces) E-DOC-CTC-20071119-0014 v1.0...
Page 507: Memm Debug Stats
memm Commands memm debug stats Display memm time statistics. SYNTAX: memm debug stats [name = <quoted string]> where: name Select typename(s) to list (supports partial OPTIONAL typename) E-DOC-CTC-20071119-0014 v1.0...
Page 508: Memm Debug Tag
memm Commands memm debug tag (Un)tag memory manager objects. SYNTAX: memm debug tag [name = <quoted string]> [tag = <{enabled|disabled}]> where: name Select typename(s) to list (supports partial OPTIONAL typename) Set (or unset) the tag OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 509: Memm Debug Traceconfig
memm Commands memm debug traceconfig Modify memm trace settings. SYNTAX: memm debug traceconfig [level = <number{0-4}]> where: level Select memm trace level (0-4). OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 510: Memm Listobjects
memm Commands memm listobjects Display objects. SYNTAX: memm listobjects [name = <quoted string]> [tagged = <{no|yes}]> [hidedeldynstr = <{no|yes}]> where: name Select typename(s) to list (supports partial OPTIONAL typename) tagged Show only tagged (yes) or untagged (no) objects OPTIONAL hidedeldynstr Hide (yes) / show (no) deleted dynstrings OPTIONAL (default = show)
Page 511: Memm Stats
memm Commands memm stats Display memm statistics. SYNTAX: memm stats [name = <quoted string]> where: name Select typename(s) to list (supports partial OPTIONAL typename) E-DOC-CTC-20071119-0014 v1.0...
Page 512 menu Command E-DOC-CTC-20071119-0014 v1.0...
Page 513: Menu Command
menu Command menu Command Displays menu E-DOC-CTC-20071119-0014 v1.0...
Page 514: Mlp Commands
mlp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 515: Mlp Commands
mlp Commands mlp Commands mlp debug export Export all scores. see page 516 mlp debug stats Display mlp statisctics. see page 517 mlp debug traceconfig Modify mlp trace settings. see page 518 mlp flush Flush all mlp structures. see page 519 mlp import Import all scores.
Page 516: Mlp Debug Export
mlp Commands mlp debug export Export all scores. E-DOC-CTC-20071119-0014 v1.0...
Page 517: Mlp Debug Stats
mlp Commands mlp debug stats Display mlp statisctics. E-DOC-CTC-20071119-0014 v1.0...
Page 518: Mlp Debug Traceconfig
mlp Commands mlp debug traceconfig Modify mlp trace settings. SYNTAX: mlp debug traceconfig [trace = <{disabled|enabled|full}]> where: trace Select mlp trace level. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 519: Mlp Flush
mlp Commands mlp flush Flush all mlp structures. E-DOC-CTC-20071119-0014 v1.0...
Page 520: Mlp Import
mlp Commands mlp import Import all scores. SYNTAX: mlp import [trace = <{disabled|enabled|full}]> where: trace Select import trace level. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 521: Mlp Privilege Add
mlp Commands mlp privilege add Add a privilege. SYNTAX: mlp privilege add name = <string> type = <{access|service}> [descr = <quoted string]> where: name Privilege name. REQUIRED type Privilege type. REQUIRED descr Privilege description. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 522: Mlp Privilege Addzone
mlp Commands mlp privilege addzone Add a zone to a privilege. SYNTAX: mlp privilege addzone name = <> zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/ Local|r_lan|r_wan|r_fs_view|r_certificates| r_remote_mgnt|r_local|r_qos|w_lan|w_wan| w_fs_passive|w_rtg|w_fwdg|w_nat|w_frwl_norm| w_frwl_adv|w_frwl_ss|w_ipsec|w_certificates| w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan| SND_local|AND_lan|AND_wan|AND_frwl|AND_local| User_Admin|MLP_Admin|secure_ipsec_term| secure_BR|CLI|CGI|FTP|MDAP|secure_reset| GUI_advanced|mbus|unsecure_connection| Sensitve_file|...}> where: name Privilege name. REQUIRED zone Zone name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 523: Mlp Privilege Config
mlp Commands mlp privilege config Modify the privilege. SYNTAX: mlp privilege config name = <> [descr = <quoted string]> [score = <{hex-word}[:{hex-word}] ex: 'a12:c30f']> where: name Select the privilege by name. REQUIRED descr Set the description. OPTIONAL score Set the score. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 524: Mlp Privilege Delete
mlp Commands mlp privilege delete Delete a privilege. SYNTAX: mlp privilege delete name = <> where: name Privilege name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 525: Mlp Privilege List
mlp Commands mlp privilege list Display the privileges. SYNTAX: mlp privilege list [name = <]> [type = <{access|service}]> [verbose = <{minimal|medium|all}]> where: name Privilege name. OPTIONAL type Privilege type. OPTIONAL verbose Limit the output list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 526: Mlp Privilege Removezone
mlp Commands mlp privilege removezone Remove a zone from a privilege. SYNTAX: mlp privilege removezone name = <> zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/ Local|r_lan|r_wan|r_fs_view|r_certificates| r_remote_mgnt|r_local|r_qos|w_lan|w_wan| w_fs_passive|w_rtg|w_fwdg|w_nat|w_frwl_norm| w_frwl_adv|w_frwl_ss|w_ipsec|w_certificates| w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan| SND_local|AND_lan|AND_wan|AND_frwl|AND_local| User_Admin|MLP_Admin|secure_ipsec_term| secure_BR|CLI|CGI|FTP|MDAP|secure_reset| GUI_advanced|mbus|unsecure_connection| Sensitve_file|...}> where: name Privilege name. REQUIRED zone Zone name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 527: Mlp Role Add
mlp Commands mlp role add Add a role. SYNTAX: mlp role add name = <string> parent = <> [descr = <quoted string]> where: name Role name. REQUIRED parent Parent role name. REQUIRED descr Role description. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 528: Mlp Role Addpriv
mlp Commands mlp role addpriv Add a privilege. SYNTAX: mlp role addpriv name = <{Administrator|LAN_Admin|PowerUser| root|SuperUser|TechnicalSupport|User| WAN_Admin}> access = <{anyaccess|AP1|AP2|AP3|AP4|AP5|AP6| AP7|AP8|AP9}> service = <{anyservice|SP1|SP10|SP11|SP12| SP13|SP14|SP15|SP16|SP17|SP18|SP19|SP2|SP3| SP4|SP5|SP6|SP7|SP8|SP9}> where: name Role name. REQUIRED access Access privilege to add. REQUIRED service Privilege name to add. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 529: Mlp Role Config
mlp Commands mlp role config Modify the role. SYNTAX: mlp role config name = <> [parent = <]> [descr = <quoted string]> where: name Role name. REQUIRED parent Parent role name. OPTIONAL descr Role description. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 530: Mlp Role Delete
mlp Commands mlp role delete Delete a role. SYNTAX: mlp role delete name = <> where: name Role name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 531: Mlp Role List
mlp Commands mlp role list Display the roles. SYNTAX: mlp role list [name = <]> [verbose = <{minimal|medium|all}]> where: name Role name. OPTIONAL verbose Limit the output list. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 532: Mlp Role Removepriv
mlp Commands mlp role removepriv Remove a privilege. SYNTAX: mlp role removepriv name = <> access = <> [service = <]> where: name Role name. REQUIRED access Access privilege to delete. REQUIRED service Privilege name to delete. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 533: Nat Commands
nat Commands nat Commands nat config Modify global NAT configuration. see page 534 nat flush Flush current NAT configuration. see page 535 nat ifconfig Modify address translation on an IP see page 536 interface. nat iflist Display all interfaces. see page 537 nat mapadd Add an address mapping to a nat see page 538...
Page 534: Nat Config
nat Commands nat config Modify global NAT configuration. SYNTAX: nat config [trace = <{disabled|enabled}]> where: trace Enable/disable traces. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 535: Nat Flush
nat Commands nat flush Flush current NAT configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 536: Nat Ifconfig
nat Commands nat ifconfig Modify address translation on an IP interface. SYNTAX: nat ifconfig intf = <{loop|Internet|LocalNetwork}> translation = <{disabled|enabled|transparent}> where: intf The IP interface name. REQUIRED translation Disabled, enabled or tranparent address REQUIRED translation. E-DOC-CTC-20071119-0014 v1.0...
Page 537: Nat Iflist
nat Commands nat iflist Display all interfaces. E-DOC-CTC-20071119-0014 v1.0...
Page 538: Nat Mapadd
nat Commands nat mapadd Add an address mapping to a nat enabled interface. SYNTAX: nat mapadd intf = <{loop|Internet|LocalNetwork}> [type = <{napt|nat}]> [outside_addr = <ip-range]> [inside_addr = <ip-range]> [access_list = <ip-range]> [foreign_addr = <ip-range]> [protocol = <{ah|egp|esp|ggp|gre|hmp|icmp| igmp|pup|rdp|rsvp|tcp|udp|vines|xns-idp|6to4| ipip} or number]> [outside_port = <port-range]>...
Page 539: Nat Mapdelete
nat Commands nat mapdelete Delete an address mapping from a nat enabled interface. SYNTAX: nat mapdelete intf = <{loop|Internet|LocalNetwork}> index = <number> where: intf The IP interface name. REQUIRED index The map index as listed by ':nat maplist'. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 540: Nat Maplist
nat Commands nat maplist Display address mappings. SYNTAX: nat maplist [intf = <{loop|Internet|LocalNetwork}]> [expand = <{disabled|enabled}]> where: intf The IP interface name. OPTIONAL expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 541: Nat Tmpladd
nat Commands nat tmpladd Add an address mapping template. SYNTAX: nat tmpladd [intf = <{loop|Internet|LocalNetwork}]> [group = <{wan|local|lan|tunnel|dmz|guest} or number]> [timeout = <number{0-65535}]> [type = <{napt|nat}]> outside_addr = <ip-range> [inside_addr = <ip-range]> [access_list = <ip-range]> [foreign_addr = <ip-range]> [protocol = <{ah|egp|esp|ggp|gre|hmp|icmp| igmp|pup|rdp|rsvp|tcp|udp|vines|xns-idp|6to4| ipip} or number]>...
Page 542 nat Commands weight The weight to be used for the template OPTIONAL instance(s). E-DOC-CTC-20071119-0014 v1.0...
Page 543: Nat Tmpldelete
nat Commands nat tmpldelete Delete an address mapping template. SYNTAX: nat tmpldelete index = <number> where: index The template index as listed by ':nat tmpllist'. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 544: Nat Tmplinst
nat Commands nat tmplinst Instantiate address mapping templates for a given dynamic address. SYNTAX: nat tmplinst intf = <{loop|Internet|LocalNetwork}> addr_index = <ip-address> dynamic_addr = <ip-address> where: intf The IP interface name. REQUIRED addr_index The outside IP address index/key to instantiate REQUIRED for.
Page 545: Nat Tmpllist
nat Commands nat tmpllist Display address mapping templates. SYNTAX: nat tmpllist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 546 ping Command E-DOC-CTC-20071119-0014 v1.0...
Page 547: Ping Command
ping Command ping Command Send ICMP ECHO_REQUEST packets. SYNTAX: ping proto = <{ip|atm}> addr = <ip-address> dest = <{atm_pvc_8_35}> [count = <number{0-1000000}]> [size = <number{28-20028}]> [interval(ms) = <number{100-1000000}]> [DF-bit = <{disabled|enabled}]> [srcaddr = <ip-address]> where: proto The interface type to be used. REQUIRED addr The destination IP address.
Page 548: Ppp Commands
ppp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 549: Ppp Commands
ppp Commands ppp Commands ppp flush Flush all PPP interfaces. see page 550 ppp ifadd Create a new PPP interface. see page 551 ppp ifattach Attach a PPP interface. see page 552 ppp ifconfig Modify a PPP interface. see page 553 ppp ifdelete Delete a PPP interface.
Page 550: Ppp Flush
ppp Commands ppp flush Flush all PPP interfaces. E-DOC-CTC-20071119-0014 v1.0...
Page 551: Ppp Ifadd
ppp Commands ppp ifadd Create a new PPP interface. SYNTAX: ppp ifadd intf = <string> where: intf The name for the new PPP interface. If not REQUIRED specified, the destination will double as interface name. E-DOC-CTC-20071119-0014 v1.0...
Page 552: Ppp Ifattach
ppp Commands ppp ifattach Attach a PPP interface. SYNTAX: ppp ifattach intf = <{Internet}> where: intf The name of the PPP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 553: Ppp Ifconfig
ppp Commands ppp ifconfig Modify a PPP interface. SYNTAX: ppp ifconfig intf = <{Internet}> [dest = <{RELAY}]> [user = <string]> [password = <password]> [acname = <quoted string]> [servicename = <quoted string]> [pool = <{none}]> [pcomp = <{disabled|enabled}]> [accomp = <{enabled|disabled|negotiate}]> [trace = <{disabled|enabled}]>...
Page 554 ppp Commands servicename The service name for a PPP session. OPTIONAL pool Acquire IP subnet and assign it to a free DHCP OPTIONAL pool. pcomp Try to negotiate PPP protocol compression (LCP OPTIONAL PCOMP). accomp Try to negotiate PPP address & control field OPTIONAL compression (LCP ACCOMP).
Page 555 ppp Commands dnsmetric DNS route metric to be used for the negotiated OPTIONAL DNS servers. idletime Maximum time the link may be idle (seconds). OPTIONAL idletrigger Consider the link being idle if no traffic is sent OPTIONAL and/or received during the idle time. unnumbered Take local IP address from 'laddr' field and OPTIONAL...
Page 556: Ppp Ifdelete
ppp Commands ppp ifdelete Delete a PPP interface. SYNTAX: ppp ifdelete intf = <{Internet}> where: intf The name of the PPP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 557: Ppp Ifdetach
ppp Commands ppp ifdetach Detach a PPP interface. SYNTAX: ppp ifdetach intf = <{}> where: intf The name of the PPP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 558: Ppp Iflist
ppp Commands ppp iflist Display the PPP interfaces. SYNTAX: ppp iflist [intf = <{Internet}]> where: intf The name of a PPP interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 559: Ppp Ifscan
ppp Commands ppp ifscan Scan a PPP interface for available interfaces. SYNTAX: ppp ifscan intf = <{Internet}> [time = <number{0-36000}]> where: intf The name of the PPP interface to scan. REQUIRED time The time to scan for services (in seconds). OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 560: Ppp Relay Flush
ppp Commands ppp relay flush Remove all ethernet interfaces from the PPP relay agent list and terminate all E-DOC-CTC-20071119-0014 v1.0...
Page 561: Ppp Relay Ifadd
ppp Commands ppp relay ifadd Add an ethernet interface to the PPP relay list. SYNTAX: ppp relay ifadd intf = <{}> where: intf The ethernet intf to be added to the PPP relay REQUIRED agent list. E-DOC-CTC-20071119-0014 v1.0...
Page 562: Ppp Relay Ifconfig
ppp Commands ppp relay ifconfig Modify an ethernet interface from the PPP relay agent list. SYNTAX: ppp relay ifconfig intf = <{bridge|ethoa_8_35}> hwaddr = <hardware-address> where: intf The ethernet intf to be added to the PPP relay REQUIRED agent list. hwaddr The hardware address (e.g.
Page 563: Ppp Relay Ifdelete
ppp Commands ppp relay ifdelete Delete an ethernet interface from the PPP relay agent list. SYNTAX: ppp relay ifdelete intf = <{bridge|ethoa_8_35}> where: intf The ethernet intf to be added to the PPP relay REQUIRED agent list. E-DOC-CTC-20071119-0014 v1.0...
Page 564: Ppp Relay Iflist
ppp Commands ppp relay iflist Display all ethernet interfaces added to the PPP relay agent list. E-DOC-CTC-20071119-0014 v1.0...
Page 565: Ppp Relay Sesslist
ppp Commands ppp relay sesslist Display all active PPP relay sessions. E-DOC-CTC-20071119-0014 v1.0...
Page 566: Ppp Rtadd
ppp Commands ppp rtadd Add a route to the routing table when PPP link comes up. SYNTAX: ppp rtadd intf = <{Internet}> dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [src = <ip-address]> [srcmsk = <ip-mask(dotted or cidr)]> [metric = <number{0-100}]>...
Page 567: Ppp Rtdelete
ppp Commands ppp rtdelete Delete the route for a PPP link. SYNTAX: ppp rtdelete intf = <{Internet}> where: intf The PPP interface name for which to delete the REQUIRED route settings. E-DOC-CTC-20071119-0014 v1.0...
Page 568 pptp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 569: Pptp Commands
pptp Commands pptp Commands pptp flush Flushes the PPTP configuration. see page 570 pptp ifadd Adds a PPTP profile (backwards see page 571 compatible with previous release, use profiles pptp list Shows PPTP configuration. see page 572 pptp profadd Defines a new PPTP profile. see page 573 pptp profdelete Deletes a PPTP profile.
Page 570: Pptp Flush
pptp Commands pptp flush Flushes the PPTP configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 571: Pptp Ifadd
pptp Commands pptp ifadd Adds a PPTP profile (backwards compatible with previous release, use profiles SYNTAX: pptp ifadd dest = <string> [rate = <number{10-10000}]> [encaps = <{vcmux|nlpid}]> [ac = <{never|always|keep}]> where: dest The WAN destination for this PPTP tunnel. REQUIRED Typically a phonebook name.
Page 572: Pptp List
pptp Commands pptp list Shows PPTP configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 573: Pptp Profadd
pptp Commands pptp profadd Defines a new PPTP profile. SYNTAX: pptp profadd name = <string> [qos = <{default}]> [encaps = <{vcmux|nlpid}]> [ac = <{never|always|keep}]> where: name The name for the new PPTP profile. REQUIRED The name of the qosbook entry, containing the OPTIONAL settings for this profile.
Page 574: Pptp Profdelete
pptp Commands pptp profdelete Deletes a PPTP profile. SYNTAX: pptp profdelete name = <> where: name The name of the profile to delete. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 575: Pptp Proflist
pptp Commands pptp proflist Lists PPTP profiles. E-DOC-CTC-20071119-0014 v1.0...
Page 576 ra Commands E-DOC-CTC-20071119-0014 v1.0...
Page 577: Ra Commands
ra Commands ra Commands ra config Configure remote access parameters. see page 578 ra start Starts temporary mode. see page 579 ra stop Stops temporary mode. see page 580 E-DOC-CTC-20071119-0014 v1.0...
Page 578: Ra Config
ra Commands ra config Configure remote access parameters. SYNTAX: ra config [state = <{disabled|enabled}]> [secure = <{enabled|disabled}]> [port = <number]> [timeout = <number]> [mode = <{Permanent|Temporary}]> [ipintf = <string]> [randompassword = <{enabled|disabled}]> [randomport = <{enabled|disabled}]> [group = <string]> [user = <string]> where: state Enable/disable RAD.
Page 579: Ra Start
ra Commands ra start Starts temporary mode. E-DOC-CTC-20071119-0014 v1.0...
Page 580: Ra Stop
ra Commands ra stop Stops temporary mode. E-DOC-CTC-20071119-0014 v1.0...
Page 581: Saveall Command
saveall Command saveall Command Saves current configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 582: Script Commands
script Commands E-DOC-CTC-20071119-0014 v1.0...
Page 583: Script Commands
script Commands script Commands script add Add line to script. see page 584 script delete Delete complete script or line from see page 585 script. script flush Flush scripts. see page 586 script list List script. see page 587 script run Run script.
Page 584: Script Add
script Commands script add Add line to script. SYNTAX: script add name = <string> [index = <number]> command = <quoted string> where: name Name of script. REQUIRED index Line number (0 = add). OPTIONAL command Command. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 585: Script Delete
script Commands script delete Delete complete script or line from script. SYNTAX: script delete name = <{autopvc_add_qos|autopvc_delete_qos| autopvc_add_bridge|autopvc_delete_pppoerelay| autopvc_add_ipoa|autopvc_delete_ipoa| autopvc_add_ethoa|autopvc_delete_ethoa| autopvc_add_pppoa|autopvc_delete_pppoa| autopvc_add_pppoe|autopvc_delete_pppoe| autopvc_change_qos|wlbrintfadd|wlbrintfdel}> [index = <number]> where: name Name of script. REQUIRED index Line number. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 586: Script Flush
script Commands script flush Flush scripts. E-DOC-CTC-20071119-0014 v1.0...
Page 587: Script List
script Commands script list List script. SYNTAX: script list [name = <{autopvc_add_qos|autopvc_delete_qos| autopvc_add_bridge|autopvc_delete_pppoerelay| autopvc_add_ipoa|autopvc_delete_ipoa| autopvc_add_ethoa|autopvc_delete_ethoa| autopvc_add_pppoa|autopvc_delete_pppoa| autopvc_add_pppoe|autopvc_delete_pppoe| autopvc_change_qos|wlbrintfadd|wlbrintfdel}]> where: name Name of script. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 588: Script Run
script Commands script run Run script. SYNTAX: script run name = <{autopvc_add_qos|autopvc_delete_qos| autopvc_add_bridge|autopvc_delete_pppoerelay| autopvc_add_ipoa|autopvc_delete_ipoa| autopvc_add_ethoa|autopvc_delete_ethoa| autopvc_add_pppoa|autopvc_delete_pppoa| autopvc_add_pppoe|autopvc_delete_pppoe| autopvc_change_qos|wlbrintfadd|wlbrintfdel}> pars = <quoted string> where: name Name of script. REQUIRED pars Parameters separated with comma e.q. a,b,c . REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 589: Service Commands
service Commands service Commands service host add Add a service. see page 590 service host assign Assign a service to a host. see page 591 service host delete Delete a service. see page 592 service host disable Disable a service. see page 593 service host flush Flush all services.
Page 590: Service Host Add
service Commands service host add Add a service. SYNTAX: service host add name = <quoted string> [mode = <{server|client|custom}]> where: name The name of the service. REQUIRED mode server, client or custom service ? OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 591: Service Host Assign
service Commands service host assign Assign a service to a host. SYNTAX: service host assign name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Checkpoint FW1 VPN|Command and Conquer Generals|Command and ConquerZero Hour|Counter Strike|Cu-SeeMe Cornell|Cu-SeeMe White Pine 3.1.2and 4.0|Dark Reign 2|Delta Force|...
Page 592: Service Host Delete
service Commands service host delete Delete a service. SYNTAX: service host delete name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Checkpoint FW1 VPN|Command and Conquer Generals|Command and ConquerZero Hour|Counter Strike|Cu-SeeMe Cornell|Cu-SeeMe White Pine 3.1.2and 4.0|Dark Reign 2|Delta Force|...
Page 593: Service Host Disable
service Commands service host disable Disable a service. SYNTAX: service host disable [name = <{ABC (Another Bittorent Client)| Age of Empires|Age of Mythology|BearShare| BitTorrent|Black and White|Call of Duty| Call of Duty -United Offensive|CarbonCopy32| Castle Wolfenstein|ChampionshipManager 03-04| Checkpoint FW1 VPN|Command and Conquer Generals|Command and Conquer Zero Hour| Counter Strike|Cu-SeeMe Cornell|Cu-SeeMe White Pine 3.1.2 and 4.0|Dark Reign 2|Delta Force|...
Page 594: Service Host Flush
service Commands service host flush Flush all services. E-DOC-CTC-20071119-0014 v1.0...
Page 595: Service Host List
service Commands service host list Display list of services. SYNTAX: service host list [name = <{ABC (Another Bittorent Client)| Age of Empires|Age of Mythology|BearShare| BitTorrent|Black and White|Call of Duty| Call of Duty -United Offensive|CarbonCopy32| Castle Wolfenstein|ChampionshipManager 03-04| Checkpoint FW1 VPN|Command and Conquer Generals|Command and Conquer Zero Hour| Counter Strike|Cu-SeeMe Cornell|Cu-SeeMe White Pine 3.1.2 and 4.0|Dark Reign 2|Delta Force|...
Page 596: Service Host Rule Add
service Commands service host rule add Create/define service portmap. SYNTAX: service host rule add name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Checkpoint FW1 VPN|Command and Conquer Generals|Command and ConquerZero Hour|Counter Strike|Cu-SeeMe Cornell|Cu-SeeMe White Pine 3.1.2and 4.0|Dark Reign 2|Delta Force|...
Page 597 service Commands triggerport Defines outbound trigger port. OPTIONAL triggerprotocol Protocol of the trigger port. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 598: Service Host Rule Delete
service Commands service host rule delete Delete a service portmap. SYNTAX: service host rule delete name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Checkpoint FW1 VPN|Command and Conquer Generals|Command and ConquerZero Hour|Counter Strike|Cu-SeeMe Cornell|Cu-SeeMe White Pine 3.1.2and 4.0|Dark Reign 2|Delta Force|...
Page 599 service Commands triggerport Defines outbound trigger port. OPTIONAL triggerprotocol Protocol of the trigger port. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 600: Service Host Stats
service Commands service host stats Service statistics. E-DOC-CTC-20071119-0014 v1.0...
Page 601: Service Host Triggerlist
service Commands service host triggerlist List all triggers. E-DOC-CTC-20071119-0014 v1.0...
Page 602: Service System Ifadd
service Commands service system ifadd Add an interface to the access list. SYNTAX: service system ifadd name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> group = <{wan|local|lan|tunnel|dmz|guest} or number> where: name The name of the service for this access list. REQUIRED group The interface group for this access list. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 603: Service System Ifdelete
service Commands service system ifdelete Delete an interface from the access list. SYNTAX: service system ifdelete name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> group = <{wan|local|lan|tunnel|dmz|guest} or number> where: name The name of the service for this access list. REQUIRED group The interface group for this access list. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 604: Service System Ipadd
service Commands service system ipadd Add an ip address (range) to the access list. SYNTAX: service system ipadd name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> ip = <ip-range> where: name The name of the service for this access list. REQUIRED The ip address (range) for this access list. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 605: Service System Ipdelete
service Commands service system ipdelete Delete an ip address (range) from the access list. SYNTAX: service system ipdelete name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> ip = <ip-range> where: name The name of the service for this access list. REQUIRED The ip address (range) for this access list. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 606: Service System List
service Commands service system list Display services. SYNTAX: service system list [name = <{PPTP|PPTPD|PPTPGRE|SNTP| SLA_ICMP_PING|SLA_UDP_PING|HTTP|HTTPs|RAD| Dynamic DNS|dyndns|statdns|custom|No-IP|DtDNS| gnudip|DHCP-S|DHCP-R|SNMP_AGENT|SSDP|MDAP| CWMP-C|CWMP-S|RAS|SRAS|IP_COMMANDS|ICMP_PING| SENDTO|PING_RESPONDER|ICMP_TRACEROUTE| UDP_TRACEROUTE|HTTPPROBE}]> [expand = <{disabled|enabled}]> [dynamics = <{disabled|enabled}]> [members = <{disabled|enabled}]> where: name The name of the service. OPTIONAL expand Expanded listing. OPTIONAL dynamics Display dynamic sevices.
Page 607: Service System Mapadd
service Commands service system mapadd Add a port map for a service. SYNTAX: service system mapadd name = <{PPTP|HTTP|HTTPs|HTTPI|FTP|TELNET|DNS- S|SNMP_AGENT|SSDP|MDAP}> intf = <{loop|Internet|LocalNetwork}> port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|...} or number> where: name The name of the service for this map. REQUIRED intf The interface for this map.
Page 608: Service System Mapdelete
service Commands service system mapdelete Delete a port map for a service. SYNTAX: service system mapdelete name = <{PPTP|HTTP|HTTPs|HTTPI|FTP|TELNET|DNS- S|SNMP_AGENT|SSDP|MDAP}> intf = <{loop|Internet|LocalNetwork}> port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|...} or number> where: name The name of the service for this map. REQUIRED intf The interface for this map.
Page 609: Service System Modify
service Commands service system modify Modify a service. SYNTAX: service system modify name = <{PPTP|PPTPD|PPTPGRE|SNTP| SLA_ICMP_PING|SLA_UDP_PING|HTTP|HTTPs|RAD| DHCP-S|DHCP-R|SNMP_AGENT|SSDP|MDAP|CWMP-C| CWMP-S|RAS|SRAS|IP_COMMANDS|PING_RESPONDER}> [state = <{disabled|enabled}]> [port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap| login|netbios-dgm|netbios-ns|netbios-ssn| netwall|netware-ip|new-rwho|nfds|nicname|nntp| ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd| realaudio|rip|rtelnet|rtsp|sip|smtp|snmp| snmptrap|snpp|sntp|sql*net|sql-net|sqlserv| sunrpc|syslog|systat|talk|telnet|...} or number]> [qoslabel = <{None|DSCP|Interactive| Management|Video|VoIP-RTP|VoIP-Signal| default}]> [routelabel = <{None|DSCP|Interactive| Management|Video|VoIP-RTP|VoIP-Signal| default}]>...
Page 610: Snmp Commands
snmp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 611: Snmp Commands
snmp Commands snmp Commands snmp community add Config an SNMP community string to see page 612 allow snmp access over IP. snmp community delete Delete an SNMP community string to see page 613 prevent snmp access over IP. snmp community list List all SNMP community strings in see page 614 use for snmp access over IP.
Page 612: Snmp Community Add
snmp Commands snmp community add Config an SNMP community string to allow snmp access over IP. SYNTAX: snmp community add securityname = <{RWCommunity|ROCommunity}> communityname = <password> where: securityname Configure access rights/restrictions control for REQUIRED the community name. communityname Configure SNMP community name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 613: Snmp Community Delete
snmp Commands snmp community delete Delete an SNMP community string to prevent snmp access over IP. SYNTAX: snmp community delete securityname = <{RWCommunity|ROCommunity}> where: securityname Access rights/restrictions control of the REQUIRED community name to be deleted. E-DOC-CTC-20071119-0014 v1.0...
Page 614: Snmp Community List
snmp Commands snmp community list List all SNMP community strings in use for snmp access over IP. E-DOC-CTC-20071119-0014 v1.0...
Page 615: Snmp Community Modify
snmp Commands snmp community modify Modify an SNMP community string to allow snmp access over IP. SYNTAX: snmp community modify securityname = <{RWCommunity|ROCommunity}> communityname = <password> where: securityname Configure access rights/restrictions control for REQUIRED the community name. communityname Configure SNMP community name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 616: Snmp Config
snmp Commands snmp config Configure global SNMP parameters. SYNTAX: snmp config [sysContact = <quoted string]> [sysName = <quoted string]> [sysLocation = <quoted string]> where: sysContact SNMP System Contact OPTIONAL sysName SNMP System Name OPTIONAL sysLocation SNMP System Location OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 617: Snmp Get
snmp Commands snmp get Get from supplied object identity. e.g. get objectid=.1.3.6.1.2.1.1.1.0 SYNTAX: snmp get [objectid = <string]> where: objectid Object identity to get from ... must include OPTIONAL the instance which is 0 for scalar objects e.g. .1.3.6.1.2.1.1.1.0 sysDescription E-DOC-CTC-20071119-0014 v1.0...
Page 618: Snmp Getnext
snmp Commands snmp getnext Get next from supplied object identity. e.g. getnext objectid= SYNTAX: snmp getnext [objectid = <string]> where: objectid Object identity to getNext from e.g. .1.3.6.1.2.1.1 OPTIONAL system returns sysDescription E-DOC-CTC-20071119-0014 v1.0...
Page 619: Snmp Ifadd
snmp Commands snmp ifadd Create a new SNMP interface. SYNTAX: snmp ifadd intf = <string> dest = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name for the new SNMP interface. REQUIRED dest The destination interface for this SNMP REQUIRED interface. E-DOC-CTC-20071119-0014 v1.0...
Page 620: Snmp Ifattach
snmp Commands snmp ifattach Attach an SNMP interface. SYNTAX: snmp ifattach intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name of the SNMP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 621: Snmp Ifconfig
snmp Commands snmp ifconfig Modify an SNMP interface. SYNTAX: snmp ifconfig intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> [securityname = <{RWCommunity|ROCommunity}]> [communityname = <password]> where: intf The name of the SNMP interface to configure. REQUIRED securityname Configure access rights/restrictions control for OPTIONAL the community name.
Page 622: Snmp Ifdelete
snmp Commands snmp ifdelete Delete an SNMP interface. SYNTAX: snmp ifdelete intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name of the SNMP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 623: Snmp Ifdetach
snmp Commands snmp ifdetach Detach an SNMP interface. SYNTAX: snmp ifdetach intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name of the SNMP interface. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 624: Snmp Iflist
snmp Commands snmp iflist Display the SNMP interfaces. SYNTAX: snmp iflist [intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}]> where: intf The name of an SNMP interface. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 625: Snmp Walk
snmp Commands snmp walk Walk from supplied object identity. e.g. walk objectid=.1.3.6.1.2.1.1 SYNTAX: snmp walk [objectid = <string]> where: objectid Object identity to walk from e.g. .1.3.6.1.2.1.1 OPTIONAL system walks the system group E-DOC-CTC-20071119-0014 v1.0...
Page 626: Sntp Commands
sntp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 627: Sntp Commands
sntp Commands sntp Commands sntp add Add NTP server see page 628 sntp config Modify/Display configuration see page 629 sntp debug traceconfig Modify SNTP client trace see page 630 configuration sntp delete Delete NTP server from list see page 631 sntp flush Flush NTP server list and SNTP client see page 632...
Page 628: Sntp Add
sntp Commands sntp add Add NTP server SYNTAX: sntp add [addr = <ip-address]> [name = <string]> [version = <number{1-4}]> where: addr IP address of NTP server to be added to list OPTIONAL name DNS name of NTP server to be added to list. OPTIONAL If both the IP address and the DNS name are provided, the IP address is ignored.
Page 629: Sntp Config
sntp Commands sntp config Modify/Display configuration SYNTAX: sntp config [state = <{enabled|disabled}]> [poll = <number{1-10080}]> [pollpresync = <number{1-60}]> where: state Enable/Disable SNTP client OPTIONAL poll polling interval (1 min, ... ,10080min(=7days)) OPTIONAL pollpresync polling interval before first sync (1 OPTIONAL min, ...
Page 630: Sntp Debug Traceconfig
sntp Commands sntp debug traceconfig Modify SNTP client trace configuration SYNTAX: sntp debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 631: Sntp Delete
sntp Commands sntp delete Delete NTP server from list SYNTAX: sntp delete [addr = <ip-address]> [name = <string]> where: addr IP address of NTP server to be removed from list OPTIONAL name DNS name of NTP server to be removed from OPTIONAL list E-DOC-CTC-20071119-0014 v1.0...
Page 632: Sntp Flush
sntp Commands sntp flush Flush NTP server list and SNTP client configuration E-DOC-CTC-20071119-0014 v1.0...
Page 633: Sntp List
sntp Commands sntp list List the NTP servers E-DOC-CTC-20071119-0014 v1.0...
Page 634 software Commands E-DOC-CTC-20071119-0014 v1.0...
Page 635: Software Commands
software Commands software Commands software download Download parameters. see page 636 software upgrade Reboots the modem to initiate the SW see page 637 upgrade. New software available on software version Displays the software version. see page 638 E-DOC-CTC-20071119-0014 v1.0...
Page 636: Software Download
software Commands software download Download parameters. SYNTAX: software download filetype = <{firmware|configuration}> url = <string> [username = <string]> [password = <string]> filesize = <string> [targetfilename = <string]> where: filetype The type of the file to be downloaded. REQUIRED Set the HTTP URL where the file is to be found REQUIRED including remote filename.
Page 637: Software Upgrade
software Commands software upgrade Reboots the modem to initiate the SW upgrade. New software available on a E-DOC-CTC-20071119-0014 v1.0...
Page 638: Software Version
software Commands software version Displays the software version. E-DOC-CTC-20071119-0014 v1.0...
Page 639: System Commands
system Commands system Commands system config Set or change system config see page 640 parameters. system debug autosave Autosave debugging commands see page 641 system debug stats Cpu and memory statistics see page 642 system dst Set daylight saving values see page 643 system flush Flush system configuration.
Page 640: System Config
system Commands system config Set or change system config parameters. SYNTAX: system config [upnp = <{disabled|enabled}]> [tr64 = <{disabled|enabled}]> [mdap = <{disabled|enabled}]> [led = <{green|red|orange|flash|off}]> [resetbutton = <{disabled|enabled}]> [digestauth = <{disabled|enabled}]> [defaultconnection = <{loop|Internet| LocalNetwork}]> [autosave = <{enabled|disabled}]> [autosavedelay = <number{0-600}]> where: upnp Enable/Disable upnp discovery...
Page 641: System Debug Autosave
system Commands system debug autosave Autosave debugging commands SYNTAX: system debug autosave [trace = <{disabled|enabled}]> where: trace Enable/Disable autosave traces OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 642: System Debug Stats
system Commands system debug stats Cpu and memory statistics SYNTAX: system debug stats [reset = <{disabled|enabled}]> where: reset Reset cpu statistics. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 643: System Dst
system Commands system dst Set daylight saving values SYNTAX: system dst [status = <{Disable|Enable}]> [mode = <{Absolute|Relative}]> [startdate = <dd/mm/yyyy]> [starttime = <hh:mm:ss]> [enddate = <dd/mm/yyyy]> [endtime = <hh:mm:ss]> [startweekday = <{Monday|Tuesday|Wednesday| Thursday|Friday|Saturday|Sunday}]> [starthour = <number{0-23}]> [startweek = <number{1-5}]> [startmonth = <number{1-12}]> [endweekday = <{Monday|Tuesday|Wednesday| Thursday|Friday|Saturday|Sunday}]>...
Page 644 system Commands endweekday Set the end weekday of the daylight saving in OPTIONAL the relative mode endhour Set the end hour of the daylight saving in the OPTIONAL relative mode endweek Set the end week of the daylight saving in the OPTIONAL relative mode endmonth...
Page 645: System Flush
system Commands system flush Flush system configuration. E-DOC-CTC-20071119-0014 v1.0...
Page 646: System Locale
system Commands system locale Set/Get regional settings. SYNTAX: system locale [dec_symbol = <{,|.}]> [group_symbol = <{.|,}]> [date_separator = <{/|-|.}]> [date_format = <{iso|ddmmyyyy|ddmmyy|mmddyyyy| mmddyy}]> [time_format = <{iso|hmmss}]> [datetime_format = <{iso|date+time|time +date}]> [duration_format = <{dhmmss|hmmss}]> where: dec_symbol Set decimal symbol OPTIONAL group_symbol Set digit grouping symbol OPTIONAL date_separator...
Page 647: System Ra Config
system Commands system ra config Configure Remote assistance params. SYNTAX: system ra config [secure = <{disabled|enabled}]> [port = <number]> [timeout = <number]> where: secure Enable/Disable https. OPTIONAL port Set destination port. OPTIONAL timeout Set connection timeout in minutes. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 648: System Reboot
system Commands system reboot Reboot the modem. E-DOC-CTC-20071119-0014 v1.0...
Page 649: System Reset
system Commands system reset Reset to (factory or ISP) defaults: user specific settings will be cleared ! SYNTAX: system reset factory = <{yes|no}> proceed = <{no|yes}> where: factory Option to reset to factory REQUIRED proceed Confirmation for resetting the modem. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 650: System Settime
system Commands system settime Set/Get date, time, timezone, daylight savings time, uptime. SYNTAX: system settime [time = <hh:mm:ss]> [timezone = <(+ or -)hh:mm]> [daylightsaving = <{disabled|enabled}]> [geotimezonename = <quoted string]> [rtc = <{disabled|enabled}]> where: time Set the system time OPTIONAL timezone Set the system timezone(-12:00...+14:00 / 15 OPTIONAL...
Page 651: System Timedreboot
system Commands system timedreboot Set or change editing mode timed reboot SYNTAX: system timedreboot [state = <{disabled|enabled}]> [time = <number{0-983040}]> [date = <string]> where: state Enable/Disable timed reboot OPTIONAL time Change default countdown time (Min). OPTIONAL date Set date/time to reboot (DD/MM/YYYY/HH:MM). OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 652 systemlog Commands E-DOC-CTC-20071119-0014 v1.0...
Page 653: Systemlog Commands
systemlog Commands systemlog Commands systemlog flush Flush all messages in syslog message see page 654 buffer. systemlog send Send messages to remote syslog see page 655 server. systemlog show Show messages in the syslog see page 656 message buffer. E-DOC-CTC-20071119-0014 v1.0...
Page 654: Systemlog Flush
systemlog Commands systemlog flush Flush all messages in syslog message buffer. E-DOC-CTC-20071119-0014 v1.0...
Page 655: Systemlog Send
systemlog Commands systemlog send Send messages to remote syslog server. SYNTAX: systemlog send [fac = <{kern|user|mail|daemon|auth|syslog| lpr|news|uucp|cron|security|ftp|local6| local7}]> [sev = <{emerg|alert|crit|err|warning|notice| info|debug}]> [hist = <{disabled|enabled}]> dest = <ip-address> where: Syslog facility level. OPTIONAL Syslog severity level. OPTIONAL hist Syslog display message history (over several OPTIONAL bootups) dest...
Page 656: Systemlog Show
systemlog Commands systemlog show Show messages in the syslog message buffer. SYNTAX: systemlog show [fac = <{kern|user|mail|daemon|auth|syslog| lpr|news|uucp|cron|security|ftp|local6| local7}]> [sev = <{emerg|alert|crit|err|warning|notice| info|debug}]> [hist = <{disabled|enabled}]> where: Syslog facility level. OPTIONAL Syslog severity level. OPTIONAL hist Syslog display message history (over several OPTIONAL bootups) E-DOC-CTC-20071119-0014 v1.0...
Page 657: Tls Commands
tls Commands tls Commands tls acs-client cert add Add a new certificate see page 658 tls acs-client cert delete Delete a certificate see page 659 tls acs-client cert list List certificates see page 660 tls acs-client config Display/modify tls settings see page 661 tls https-server cert add Add a new certificate...
Page 658: Tls Acs-Client Cert Add
tls Commands tls acs-client cert add Add a new certificate SYNTAX: tls acs-client cert add filename = <string> where: filename name of the certificate file REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 659: Tls Acs-Client Cert Delete
tls Commands tls acs-client cert delete Delete a certificate SYNTAX: tls acs-client cert delete index = <number> where: index Certificate index REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 660: Tls Acs-Client Cert List
tls Commands tls acs-client cert list List certificates SYNTAX: tls acs-client cert list [index = <number]> [expand = <{disabled|enabled}]> where: index Certificate index OPTIONAL expand Display more information OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 661: Tls Acs-Client Config
tls Commands tls acs-client config Display/modify tls settings SYNTAX: tls acs-client config [state = <{disabled|enabled}]> [auth-serv = <{disabled|enabled}]> [valid-date = <{disabled|enabled}]> [valid-domain = <{disabled|enabled}]> where: state SSL/TLS client for ACS state OPTIONAL auth-serv Request server authentication OPTIONAL valid-date Check certificate validity date OPTIONAL valid-domain Check certificate domain...
Page 662: Tls Https-Server Cert Add
tls Commands tls https-server cert add Add a new certificate SYNTAX: tls https-server cert add filename = <string> where: filename name of the certificate file REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 663: Tls Https-Server Cert Delete
tls Commands tls https-server cert delete Delete a certificate SYNTAX: tls https-server cert delete index = <number> where: index Certificate index REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 664: Tls Https-Server Cert List
tls Commands tls https-server cert list List certificates SYNTAX: tls https-server cert list [index = <number]> [expand = <{disabled|enabled}]> where: index Certificate index OPTIONAL expand Display more information OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 665: Tls Https-Server Config
tls Commands tls https-server config Display/modify tls settings SYNTAX: tls https-server config [state = <{disabled|enabled}]> [auth-client = <{disabled|enabled}]> [valid-date = <{disabled|enabled}]> where: state SSL/TLS server for HTTPS state OPTIONAL auth-client Request client authentication OPTIONAL valid-date Check certificate validity date OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 666: Tls Self Cert List
tls Commands tls self cert list List certificates SYNTAX: tls self cert list [index = <number]> [expand = <{disabled|enabled}]> where: index Certificate index OPTIONAL expand Display more information OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 667: Traceroute Command
traceroute Command traceroute Command Send ICMP/UDP packets to trace the ip path. SYNTAX: traceroute addr = <ip-address> [count = <number{1-10}]> [size = <number{1-20000}]> [interval = <number{1000-60000}]> [maxhops = <number{1-255}]> [dstport = <number{1-65535}]> [maxfail = <number{0-255}]> [type = <{icmp|udp}]> [utime = <{disabled|enabled}]> where: addr The destination IP address.
Page 668 upgrade Commands E-DOC-CTC-20071119-0014 v1.0...
Page 669: Upgrade Commands
upgrade Commands upgrade Commands upgrade config Change the upgrade daemon see page 670 configuration upgrade debug sesslist Display the list of sessions see page 671 upgrade debug traceconfig Enable/disable upgrade daemon see page 672 tracing upgrade profile add Add a new file profile description see page 673 upgrade profile delete Delete a file profile description...
Page 670: Upgrade Config
upgrade Commands upgrade config Change the upgrade daemon configuration SYNTAX: upgrade config [state = <{disabled|enabled}]> [protocol = <{tftp|ftp|http|https}]> where: state The upgrade daemon state OPTIONAL protocol The transfer protocol to be used for file OPTIONAL download E-DOC-CTC-20071119-0014 v1.0...
Page 671: Upgrade Debug Sesslist
upgrade Commands upgrade debug sesslist Display the list of sessions E-DOC-CTC-20071119-0014 v1.0...
Page 672: Upgrade Debug Traceconfig
upgrade Commands upgrade debug traceconfig Enable/disable upgrade daemon tracing SYNTAX: upgrade debug traceconfig state = <{disabled|enabled}> where: state The upgrade daemon trace state REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 673: Upgrade Profile Add
upgrade Commands upgrade profile add Add a new file profile description SYNTAX: upgrade profile add extension = <{sts|ini|bin}> [maxsize(KBytes) = <number]> action = <{none|config_load|script_load| reboot|upgrade}> where: extension The extension of the new file profile REQUIRED maxsize(KBytes) The maximum filesize (in KBytes) allowed for OPTIONAL files with the extension of this profile action...
Page 674: Upgrade Profile Delete
upgrade Commands upgrade profile delete Delete a file profile description SYNTAX: upgrade profile delete extension = <{sts|ini|bin}> where: extension The extension of the file profile to be deleted REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 675: Upgrade Profile List
upgrade Commands upgrade profile list Display a list of the file profile descriptions E-DOC-CTC-20071119-0014 v1.0...
Page 676: Upgrade Profile Modify
upgrade Commands upgrade profile modify Modify a file profile description SYNTAX: upgrade profile modify extension = <{sts|ini|bin}> [maxsize(KBytes) = <number]> action = <{none|config_load|script_load| reboot|upgrade}> where: extension The extension of the new file profile REQUIRED maxsize(KBytes) The maximum filesize (in KBytes) allowed for OPTIONAL files with the extension of this profile action...
Page 677: Upgrade Start
upgrade Commands upgrade start Start a new upgrade SYNTAX: upgrade start protocol = <{tftp|ftp|http|https}> [server = <string]> [filename = <string]> where: protocol The protocol to be used for the download REQUIRED server The server name or IP address OPTIONAL filename The file to be downloaded OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 678: Upnp Commands
upnp Commands E-DOC-CTC-20071119-0014 v1.0...
Page 679: Upnp Commands
upnp Commands upnp Commands upnp config Config upnp parameter(s) see page 680 upnp flush Flushes upnp config (i.e. to defaults) see page 681 upnp list List all registered devices see page 682 E-DOC-CTC-20071119-0014 v1.0...
Page 680: Upnp Config
upnp Commands upnp config Config upnp parameter(s) SYNTAX: upnp config [maxage = <number{60-999999}]> [writemode = <{full|natonly|readonly}]> [safenat = <{disabled|enabled}]> [preferredaddresses = <string]> where: maxage ssdp advertisements MAX-AGE (default = 1800) OPTIONAL writemode Configuration access level for UPnP OPTIONAL safenat Enable / disable check on safe nat entries OPTIONAL (limited to own host) preferredaddresses...
Page 681: Upnp Flush
upnp Commands upnp flush Flushes upnp config (i.e. to defaults) E-DOC-CTC-20071119-0014 v1.0...
Page 682: Upnp List
upnp Commands upnp list List all registered devices SYNTAX: upnp list [verbose = <number{0-2}]> where: verbose Verbose level (default = 1) OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 683: User Commands
user Commands user Commands user add Add a user. see page 684 user config Modify the user. see page 685 user delete Delete a user. see page 686 user flush Flush the users. see page 687 user list Display the users. see page 688 user rights Display session rights.
Page 684: User Add
user Commands user add Add a user. SYNTAX: user add name = <string> password = <password> role = <> [hash2 = <string]> [descr = <quoted string]> [defuser = <{disabled|enabled}]> [defremadmin = <{disabled|enabled}]> [deflocadmin = <{disabled|enabled}]> where: name User name. REQUIRED password User password.
Page 685: User Config
user Commands user config Modify the user. SYNTAX: user config name = <{Administrator|tech}> [password = <password]> [role = <]> [descr = <quoted string]> [defuser = <{disabled|enabled}]> [defremadmin = <{disabled|enabled}]> [deflocadmin = <{disabled|enabled}]> where: name User name. REQUIRED password User password. OPTIONAL role Role name.
Page 686: User Delete
user Commands user delete Delete a user. SYNTAX: user delete name = <{Administrator|tech}> where: name User name. REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 687: User Flush
user Commands user flush Flush the users. E-DOC-CTC-20071119-0014 v1.0...
Page 688: User List
user Commands user list Display the users. SYNTAX: user list [name = <{Administrator|tech}]> [channel = <{ftp|telnet|http|mdap|serial}]> [origin = <{lan|wan|local}]> [secure = <{disabled|enabled}]> where: name User name. OPTIONAL channel The selected channel. OPTIONAL origin The selected origin. OPTIONAL secure The selected security level. OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 689: User Rights
user Commands user rights Display session rights. E-DOC-CTC-20071119-0014 v1.0...
Page 690 wireless Commands E-DOC-CTC-20071119-0014 v1.0...
Page 691: Wireless Commands
wireless Commands wireless Commands wireless debug stats Transfer statistics see page 693 wireless debug txpower TX power override see page 694 wireless ifconfig Configures wireless settings. see page 695 wireless macacl add Add an ACL MAC entry see page 696 wireless macacl config Access Control List configuration see page 697...
Page 692 wireless Commands wireless secmode config Configure/Show the security mode. see page 718 wireless secmode wep Configure WEP settings. see page 719 wireless secmode wpa-psk Configure WPA-PSK settings. see page 720 wireless stations list List of the currently associated see page 721 stations wireless wds add add WDS station...
Page 693: Wireless Debug Stats
wireless Commands wireless debug stats Transfer statistics E-DOC-CTC-20071119-0014 v1.0...
Page 694: Wireless Debug Txpower
wireless Commands wireless debug txpower TX power override SYNTAX: wireless debug txpower [txpwr = <number]> where: txpwr TX power in milliwatt OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 695: Wireless Ifconfig
wireless Commands wireless ifconfig Configures wireless settings. SYNTAX: wireless ifconfig [state = <{enabled|disabled}]> [channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12| 13}]> [ssid = <quoted string]> [any = <{enabled|disabled}]> [interop = <{802.11b|802.11b(legacy)/g| 802.11b/g|802.11g}]> [frameburst = <{disabled|enabled}]> where: state Interface operational status of wireless access OPTIONAL point channel Communication channel number...
Page 696: Wireless Macacl Add
wireless Commands wireless macacl add Add an ACL MAC entry SYNTAX: wireless macacl add [ssid_id = <number{0-5}]> hwaddr = <hardware-address> permission = <{allow|deny}> [name = <quoted string]> where: ssid_id ssid id OPTIONAL hwaddr The Ethernet MAC address of the ACL entry REQUIRED permission The action to be performed on ACL entry...
Page 697: Wireless Macacl Config
wireless Commands wireless macacl config Access Control List configuration SYNTAX: wireless macacl config [ssid_id = <number{0-5}]> [control = <{lock|unlock|register}]> [regtime = <number{15-3600}]> where: ssid_id ssid id OPTIONAL control Access Control List mode OPTIONAL regtime Registration time OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 698: Wireless Macacl Delete
wireless Commands wireless macacl delete Delete an ACL MAC entry SYNTAX: wireless macacl delete ssid_id = <number{0-5}> hwaddr = <hardware-address> where: ssid_id ssid id REQUIRED hwaddr hardware address of the ACL entry REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 699: Wireless Macacl Flush
wireless Commands wireless macacl flush Flushes ACL entries SYNTAX: wireless macacl flush [ssid_id = <number{0-5}]> proceed = <{disabled|enabled}> where: ssid_id ssid id OPTIONAL proceed Confirmation required REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 700: Wireless Macacl List
wireless Commands wireless macacl list Shows a list of all configured ACL entries SYNTAX: wireless macacl list [ssid_id = <number{0-5}]> where: ssid_id ssid id OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 701: Wireless Macacl Modify
wireless Commands wireless macacl modify Modify an ACL entry SYNTAX: wireless macacl modify ssid_id = <number{0-5}> hwaddr = <hardware-address> [permission = <{allow|deny}]> [name = <quoted string]> where: ssid_id ssid id REQUIRED hwaddr The Ethernet MAC address of the ACL entry REQUIRED permission The action to be performed on ACL entry...
Page 702: Wireless Macacl Register
wireless Commands wireless macacl register Start a registration process (only for register mode) SYNTAX: wireless macacl register proceed = <{disabled|enabled}> where: proceed Confirmation required REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 703: Wireless Mssid Ifadd
wireless Commands wireless mssid ifadd Add an extra ssid context SYNTAX: wireless mssid ifadd ssid = <string> where: ssid ssid REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 704: Wireless Mssid Ifattach
wireless Commands wireless mssid ifattach Attach a ssid context SYNTAX: wireless mssid ifattach ssid_id = <number{1-5}> where: ssid_id ssid REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 705: Wireless Mssid Ifconfig
wireless Commands wireless mssid ifconfig Configure a ssid context SYNTAX: wireless mssid ifconfig ssid_id = <number{0-5}> [ssid = <string]> [apisolation = <{disabled|enabled}]> [any = <{disabled|enabled}]> [secmode = <{disable|wep|wpa-psk}]> [WEPkey = <quoted string]> [WPAPSKkey = <quoted string]> [WPAPSKversion = <{WPA|WPA2|WPA+WPA2}]> [addscript = <quoted string]> [delscript = <quoted string]>...
Page 706: Wireless Mssid Ifdelete
wireless Commands wireless mssid ifdelete Delete a ssid context SYNTAX: wireless mssid ifdelete ssid_id = <number{1-5}> where: ssid_id ssid REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 707: Wireless Mssid Ifdetach
wireless Commands wireless mssid ifdetach Detach a ssid context SYNTAX: wireless mssid ifdetach ssid_id = <number{1-5}> where: ssid_id ssid REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 708: Wireless Mssid Iflist
wireless Commands wireless mssid iflist Multiple ssid configuration SYNTAX: wireless mssid iflist [ssid_id = <number{0-5}]> where: ssid_id ssid OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 709: Wireless Multiuni Add
wireless Commands wireless multiuni add add a multicast to unicat mapping SYNTAX: wireless multiuni add multicast = <hardware-address> unicast = <hardware-address> where: multicast Multicast MAC REQUIRED unicast Unicast MAC REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 710: Wireless Multiuni Delete
wireless Commands wireless multiuni delete delete all multicast mappings SYNTAX: wireless multiuni delete multicast = <hardware-address> where: multicast Multicast MAC REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 711: Wireless Multiuni Flush
wireless Commands wireless multiuni flush flush all multicast to unicast mappings E-DOC-CTC-20071119-0014 v1.0...
Page 712: Wireless Multiuni List
wireless Commands wireless multiuni list show configured multicast to unicast mappings E-DOC-CTC-20071119-0014 v1.0...
Page 713: Wireless Multiuni Scanresults
wireless Commands wireless multiuni scanresults display detected multicast mac addresses SYNTAX: wireless multiuni scanresults [rescan = <{no|yes}]> where: rescan rescan for new multicast addresses OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 714: Wireless Qos Apacconfig
wireless Commands wireless qos apacconfig configure AP EDCA parameters SYNTAX: wireless qos apacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}]> [cwmax = <{1|3|7|15|31|63|127|255|511|1023| 2047|4095|8191|16383|32767}]> [cwmin = <{0|1|3|7|15|31|63|127|255}]> [aifsn = <number{1-15}]> [txop = <number]> where: class AC class OPTIONAL cwmax CWmax configuration OPTIONAL cwmin CWmin configuration OPTIONAL aifsn Aifsn configuration...
Page 715: Wireless Qos Config
wireless Commands wireless qos config configure QoS settings SYNTAX: wireless qos config [mode = <{disabled|wmm}]> where: mode WMM active OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 716: Wireless Qos Staacconfig
wireless Commands wireless qos staacconfig configure STA EDCA parameters SYNTAX: wireless qos staacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}]> [cwmax = <{1|3|7|15|31|63|127|255|511|1023| 2047|4095|8191|16383|32767}]> [cwmin = <{0|1|3|7|15|31|63|127|255}]> [aifsn = <number{1-15}]> [txop = <number]> where: class AC class OPTIONAL cwmax CWmax configuration OPTIONAL cwmin CWmin configuration OPTIONAL aifsn Aifsn configuration...
Page 717: Wireless Reset
wireless Commands wireless reset Reset Wireless interface settings to defaults SYNTAX: wireless reset proceed = <{disabled|enabled}> where: proceed Confirmation required REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 718: Wireless Secmode Config
wireless Commands wireless secmode config Configure/Show the security mode. SYNTAX: wireless secmode config [mode = <{disable|wep|wpa-psk}]> where: mode security mode OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 719: Wireless Secmode Wep
wireless Commands wireless secmode wep Configure WEP settings. SYNTAX: wireless secmode wep [encryptionkey = <quoted string]> where: encryptionkey WEP key: expected format 5 or 13 ASCII OPTIONAL characters, or 10 or 26 HEX digits. E-DOC-CTC-20071119-0014 v1.0...
Page 720: Wireless Secmode Wpa-Psk
wireless Commands wireless secmode wpa-psk Configure WPA-PSK settings. SYNTAX: wireless secmode wpa-psk [presharedkey = <quoted string]> [version = <{WPA|WPA2|WPA+WPA2}]> where: presharedkey WPA-PSK key: expected format 8 to 63 ASCII OPTIONAL characters or 64 HEX digits. version wpa version OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 721: Wireless Stations List
wireless Commands wireless stations list List of the currently associated stations SYNTAX: wireless stations list [hwaddr = <hardware-address]> [ssid_id = <number{0-5}]> where: hwaddr The MAC address of station OPTIONAL ssid_id Selected BSS OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 722: Wireless Wds Add
wireless Commands wireless wds add add WDS station SYNTAX: wireless wds add bssid = <hardware-address> [name = <quoted string]> where: bssid The WDS bssid REQUIRED name A user specified reference name OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 723: Wireless Wds Config
wireless Commands wireless wds config WDS configuration parameters SYNTAX: wireless wds config [state = <{disabled|enabled}]> where: state WDS functionality OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 724: Wireless Wds Delete
wireless Commands wireless wds delete delete WDS station SYNTAX: wireless wds delete bssid = <hardware-address> where: bssid The WDS bssid REQUIRED E-DOC-CTC-20071119-0014 v1.0...
Page 725: Wireless Wds Flush
wireless Commands wireless wds flush Flush all wds stations E-DOC-CTC-20071119-0014 v1.0...
Page 726: Wireless Wds List
wireless Commands wireless wds list list WDS stations E-DOC-CTC-20071119-0014 v1.0...
Page 727: Wireless Wds Scanresults
wireless Commands wireless wds scanresults scan all networks SYNTAX: wireless wds scanresults [rescan = <{disabled|enabled}]> where: rescan perform a new scan OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 728 xdsl Commands E-DOC-CTC-20071119-0014 v1.0...
Page 729: Xdsl Commands
xdsl Commands xdsl Commands xdsl config Modify/Display dsl configuration see page 730 xdsl debug bitloadinginfo Displays # bits per tone see page 731 xdsl debug deltconfig Dual Ended Line Testing interface see page 732 xdsl debug deltinfo Dual Ended Line Test result display see page 733 xdsl debug modemoptioninfo The modem options bitmap display...
Page 730: Xdsl Config
xdsl Commands xdsl config Modify/Display dsl configuration SYNTAX: xdsl config [adslmultimode = <{adsl|adsl2|adsl2plus}]> [detect-lop = <{disabled|enabled}]> [syslog = <{disabled|enabled}]> where: adslmultimode Set/Show selected multimode type of the OPTIONAL modem detect-lop Detect Loss Of Power OPTIONAL syslog Log in syslog during showtime OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 731: Xdsl Debug Bitloadinginfo
xdsl Commands xdsl debug bitloadinginfo Displays # bits per tone E-DOC-CTC-20071119-0014 v1.0...
Page 732: Xdsl Debug Deltconfig
xdsl Commands xdsl debug deltconfig Dual Ended Line Testing interface SYNTAX: xdsl debug deltconfig [state = <{disabled|enabled}]> where: state Enable/Disable dual ended line testing OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 733: Xdsl Debug Deltinfo
xdsl Commands xdsl debug deltinfo Dual Ended Line Test result display E-DOC-CTC-20071119-0014 v1.0...
Page 734: Xdsl Debug Modemoptioninfo
xdsl Commands xdsl debug modemoptioninfo The modem options bitmap display E-DOC-CTC-20071119-0014 v1.0...
Page 735: Xdsl Debug Multimode
xdsl Commands xdsl debug multimode Config custom multimode SYNTAX: xdsl debug multimode [config = <[+/-]flag[+/-flag...]{default t1.413issue2 g992.1_annex_a g992.2 g992.5_annex_m}]> where: config The custom multimode bitmap OPTIONAL E-DOC-CTC-20071119-0014 v1.0...
Page 736: Xdsl Debug Traceconfig
xdsl Commands xdsl debug traceconfig Config the adsl tracelevel SYNTAX: xdsl debug traceconfig level = <{0|1|2|3|4}> where: level Trace Level (0=disable tracing; 1=enable dsl REQUIRED manager tracing; 2=enable dsl driver tracing) E-DOC-CTC-20071119-0014 v1.0...
Page 737: Xdsl Info
xdsl Commands xdsl info Displays status information about modem SYNTAX: xdsl info [expand = <{disabled|enabled}]> [g.997.1 = <{disabled|enabled}]> [counter_period_filter = <{current|15_minutes| 24_hours}]> [counters_reset = <{no|yes}]> where: expand Condensed / Expanded listing link information OPTIONAL g.997.1 Condensed / Expanded listing link information OPTIONAL counter_period_filter Specify the statistics period...
Page 738: Xdsl Version
xdsl Commands xdsl version Display xdsl version information. E-DOC-CTC-20071119-0014 v1.0...

This manual is also suitable for:

Tg585 v7

THOMSON TG576 v7 Reference Manual

Command

Command

Atm Commands

Autopvc Commands

Config Commands

Connection Commands

Cwmp Commands

Debug Command

Dhcp Commands

Dns Commands

Dsd Commands

Dyndns Commands

Env Commands

Eth Commands

Exit Command

Expr Commands

Firewall Commands

Quick Links

Related Manuals for THOMSON TG576 v7

Summary of Contents for THOMSON TG576 v7