ping Command
ping Command
Send ICMP ECHO_REQUEST packets.
SYNTAX:
ping
where:
proto
addr
dest
count
size
interval(ms)
DF-bit
srcaddr
E-DOC-CTC-20071119-0014 v1.0
proto = <{ip|atm}>
addr = <ip-address>
dest = <{atm_pvc_8_35}>
[count = <number{0-1000000}]>
[size = <number{28-20028}]>
[interval(ms) = <number{100-1000000}]>
[DF-bit = <{disabled|enabled}]>
[srcaddr = <ip-address]>
The interface type to be used.
The destination IP address.
The destination address for the request.
The number of pings to send (0 is continuous
ping).
The size of the ping datagram(s).
The interval in milliseconds between packets.
Set the Don't Fragment bit (or leave unset) in the
IP header of ping
The IP source address to use.
REQUIRED
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
547