ip Commands
ip ifconfig
Modify an IP interface configuration.
SYNTAX:
ip ifconfig
where:
intf
mtu
status
hwaddr
group
linksensing
primary
mcastpromisc
E-DOC-CTC-20071119-0014 v1.0
intf = <{loop|Internet|LocalNetwork}>
[mtu = <number{68-65535}]>
[status = <{down|up}]>
[hwaddr = <hardware-address]>
[group = <{wan|local|lan|tunnel|dmz|guest} or
number]>
[linksensing = <{disabled|enabled}]>
[primary = <{disabled|enabled}]>
[mcastpromisc = <{disabled|enabled}]>
An IP interface name.
The maximum packet size (including IP header)
to use on this interface.
The administrative state of the interface.
The hardware address (e.g. Ethernet MAC
address) of this interface.
The group this interface belongs to. Can be used
by e.g. firewalling.
The IP interface's awareness of link state
transitions.
Make the IP interface the primary interface.
Make the IP interface multicast promiscuous.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
437