THOMSON TG576 v7 Reference Manual page 249

eth Commands
eth bridge xtratag list
eth device ifconfig
eth device iflist
eth flush
eth ifadd
eth ifattach
eth ifconfig
eth ifdelete
eth ifdetach
eth iflist
eth switch group flush
eth switch group list
eth switch group move
eth switch info
eth switch mirror capture
eth switch mirror egress
eth switch mirror ingress
eth switch qos config
eth switch qos ifconfig
eth switch qos list
eth switch qos weights
eth switch shaper config
eth switch shaper ifconfig
eth switch shaper iflist
eth switch share add
eth switch share delete
E-DOC-CTC-20071119-0014 v1.0
Display all extra tag mapping entries.
Configure ethernet interface.
Show status of ethernet interfaces.
Flush all ETH interfaces.
Create a new ETH interface.
Attach an ETH interface.
Modify an ETH interface.
Delete an ETH interface.
Detach an ETH interface.
Display the ETH interfaces.
To set all ports to the default settings
(all ports in group 0).
List all configured groups.
Move a specified port to a specified
group.
Display switch capabilities
Define the specified port to be the
Mirror Capture Port.
Enable or disable the specified port to
be a Transmitted Port Mirroring.
Enable or disable the specified port to
be a Received Port Mirroring.
Configure common qos parameters.
Configure per port qos parameters.
Display qos configuration.
Configure the queue weights.
Configure common ingress shaper
parameters.
Configure per port shaper
parameters.
Display shaper configuration per port.
Add a port to be shared.
Delete a shared port.
see page 296
see page 297
see page 298
see page 299
see page 300
see page 301
see page 302
see page 303
see page 304
see page 305
see page 306
see page 307
see page 308
see page 309
see page 310
see page 311
see page 312
see page 313
see page 314
see page 315
see page 316
see page 317
see page 318
see page 319
see page 320
see page 321
249