Eth Commands - THOMSON TG576 v7 Reference Manual

eth Commands

eth Commands
eth bridge add
eth bridge clear
eth bridge config
eth bridge delete
eth bridge dynvlan actlist
eth bridge dynvlan add
eth bridge dynvlan config
eth bridge dynvlan delete
eth bridge dynvlan flush
eth bridge dynvlan list
eth bridge flush
eth bridge ifadd
eth bridge ifattach
eth bridge ifconfig
eth bridge ifdelete
eth bridge ifdetach
eth bridge ifflush
eth bridge iflist
eth bridge igmpsnooping clear
eth bridge igmpsnooping config
eth bridge igmpsnooping ifconfig
eth bridge igmpsnooping iflist
E-DOC-CTC-20071119-0014 v1.0
Add a new bridge instance.
Clear bridge statistics.
Modify/Display the bridge
configuration settings.
Delete a bridge instance.
Display the active MAC entries for the
dynamic VLAN membership.
Add a dynamic VLAN membership
entry.
Modify the dynamic VLAN
membership configuration.
Delete a dynamic VLAN membership
entry.
Flush all dynamic VLAN membership
entries.
Display a dynamic VLAN membership
entry.
Flush all bridge instances with their
interfaces and properties.
Add a new bridge interface.
Attach a bridge interface.
Modify a bridge interface
configuration.
Delete a bridge interface.
Detach a bridge interface.
flush the bridge interfaces: detach/
delete all interfaces.
Display the current bridge interfaces.
Clear snooping statistics.
Configure bridge instance IGMP
Snooping flags.
Configure bridge interface IGMP
snooping flags and mode.
Display bridge interface IGMP status.
see page 251
see page 252
see page 253
see page 254
see page 255
see page 256
see page 257
see page 258
see page 259
see page 260
see page 261
see page 262
see page 263
see page 264
see page 266
see page 267
see page 268
see page 269
see page 270
see page 271
see page 272
see page 273
247