Ipqos Config - THOMSON TG576 v7 Reference Manual

ipqos config

Modify the IP QoS configuration for a given destination of an interface.
SYNTAX:
ipqos config
where:
dest
state
discard
priority
realtimerate
burstsize
weight1
weight2
weight3
weight4
maxpackets
maxbytes
454
dest = <{atm_pvc_8_35}>
[state = <{disabled|enabled}]>
[discard = <{tail|early}]>
[priority = <{wfq|strict|wrr}]>
[realtimerate = <number{1-100}]>
[burstsize = <number{1-64}]>
[weight1 = <number{1-97}]>
[weight2 = <number{1-97}]>
[weight3 = <number{1-97}]>
[weight4 = <number{1-97}]>
[maxpackets = <number{0-250}]>
[maxbytes = <number{0-128}]>
The destination of the interface. Typically, a
phonebook entry.
Enable, disable IP QoS for the interface.
The packet discard strategy in case of
congestion.
The subqueue priority algorithm.
The percentage of the bandwith.
Burstsize in kilo bytes (KB).
The weight of queue 1 used for weighted fair
queueing (WFQ) or weighted round robin (WRR).
The weight of queue 2 used for weighted fair
queueing (WFQ) or weighted round robin (WRR).
The weight of queue 3 used for weighted fair
queueing (WFQ) or weighted round robin (WRR).
The weight of queue 4 used for weighted fair
queueing (WFQ) or weigthed round robin (WRR).
The maximum number of packets in all queues.
The maximum size in kilo bytes (KB) in all
queues.
ipqos Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20071119-0014 v1.0