eth Commands
eth device ifconfig
Configure ethernet interface.
SYNTAX:
eth device ifconfig
where:
intf
type
state
E-DOC-CTC-20071119-0014 v1.0
intf = <{ethif1|ethif2|ethif3|ethif4|wlif1}>
[type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|
100BaseTFD} or number]>
[state = <{enabled|disabled}]>
The name of a physical interface.
The ethernet type.
The interface state.
REQUIRED
OPTIONAL
OPTIONAL
297