Eth Bridge Ifconfig - THOMSON TG576 v7 Reference Manual

eth bridge ifconfig

Modify a bridge interface configuration.
SYNTAX:
eth bridge ifconfig
where:
brname
intf
dest
portstate
retry
priotag
vlan
prioconfig
ipprec
priority
264
[brname = <{bridge}]>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN}>
[dest = <{}]>
[portstate = <{disabled|learning|forwarding}]>
[retry = <number{0-65535}]>
[priotag = <{disabled|enabled}]>
[vlan = <{default}]>
[prioconfig = <{disabled|overwrite|increase}]>
[ipprec = <{disabled|precedence|dscp}]>
[priority = <number{0-7}]>
[regenprio = <string]>
[ingressfiltering = <{disabled|enabled}]>
[acceptvlanonly = <{disabled|enabled}]>
[mcastfilter = <{disabled|enabled}]>
[dynvlan = <{disabled|enabled}]>
[wan = <{disabled|enabled}]>
[igmpsnooping = <{disabled|enabled}]>
[priotransparent = <{disabled|enabled}]>
[bpdufiltering = <{disabled|enabled}]>
[xtratagging = <{none|c-vlan|s-vlan}]>
The name of a bridge instance.
The name of the bridge interface to configure.
The destination for this interface. Typically an
ATM or a physical interface name.
The bridge portstate for this interface.
The number of WAN connection setup retries
before giving up.
Enable/Disable priority tagging.
The default VLAN.
The priority configuration for this interface.
The IP precedence for this interface.
The default priority for untagged ingress
packets.
eth Commands
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20071119-0014 v1.0