Snmp Commands - THOMSON TG576 v7 Reference Manual

snmp Commands

snmp Commands
snmp community add
snmp community delete
snmp community list
snmp community modify
snmp config
snmp get
snmp getnext
snmp ifadd
snmp ifattach
snmp ifconfig
snmp ifdelete
snmp ifdetach
snmp iflist
snmp walk
E-DOC-CTC-20071119-0014 v1.0
Config an SNMP community string to
allow snmp access over IP.
Delete an SNMP community string to
prevent snmp access over IP.
List all SNMP community strings in
use for snmp access over IP.
Modify an SNMP community string to
allow snmp access over IP.
Configure global SNMP parameters.
Get from supplied object identity. e.g.
get objectid=.1.3.6.1.2.1.1.1.0
Get next from supplied object
identity. e.g. getnext objectid=
Create a new SNMP interface.
Attach an SNMP interface.
Modify an SNMP interface.
Delete an SNMP interface.
Detach an SNMP interface.
Display the SNMP interfaces.
Walk from supplied object identity.
e.g. walk objectid=.1.3.6.1.2.1.1
see page 612
see page 613
see page 614
see page 615
see page 616
see page 617
see page 618
see page 619
see page 620
see page 621
see page 622
see page 623
see page 624
see page 625
611